Lexmark Consumer Inkjet Setup Booklet - Page 1

Setup troubleshooting Symptom Diagnosis Solution The Power light is not lit Is the power cord pushed all the way into the printer? 1 Disconnect the power cord from the wall outlet, and then from the printer. 2 Reconnect the power cord by pushing it all the way into the connector on the printer, and then into the wall outlet. 3 Press Power. Is the printer connected to a working electrical outlet? 1 Connect the printer to an electrical outlet that other electrical devices have been using. 2 Press Power. Memory card is not recognized Is the memory card damaged? by the printer Is the memory card inserted correctly? Verify that there is no damage to the memory card. Insert the memory card correctly. For help, see "Inserting memory cards" in the User's Guide. Is there more than one memory card inserted at the same time. Only one memory card may be used at one time. Remove the second memory card. Are you using a supported memory card type? For supported memory cards, see "Supported memory cards" in the User's Guide. Do you have a PictBridge-enabled digital camera connected to the printer. Disconnect the PictBridge-enabled digital camera from the printer. The control panel displays text Did you select a language? in the wrong language 1 Press Menu. 2 Press the down arrow button until you reach the last item. 3 Press the up arrow button twice. 4 Press + or - to scroll to the language you want. 5 Press Select to save your choice. Need ink? • 33 • 35 Questions? • Refer to your User's Guide. • Visit our Web site: http:// support.lexmark.com/. • Call us at 1-800-332-4120. Monday-Friday (9:00 AM-9:00 PM EST) Saturday (Noon-6:00 PM EST) Note: Phone number and support times may change without notice. Record the following information (located on your store receipt and the back of your printer) and have it ready when you contact us so that we may serve you faster: Machine Type number Serial number Date purchased Store where purchased Save this sheet for future reference. PN 20C0070 EC 9J0003 © 2004 Lexmark International, Inc. All rights reserved. *20C0070* 310 series Setup Instructions www.lexmark.com Safety information • Use only the power supply provided with this product or the manufacturer's authorized replacement power supply. • Connect the power supply cord to an electrical outlet that is near the product and easily accessible. • Refer service or repairs, other than those described in the user documentation, to a professional service person. CAUTION: Do not set up this product or make any electrical or cabling connections, such as the power supply