Lexmark E120 Quick Reference - Page 3

Primary light sequence Secondary light sequence Ready / Data Error Ready / Data Error Message Memory full (Ready / Data light blinks three times) Host interface disabled (Ready / Data light blinks five times) Jam in the printer paper path (Ready / Data light blinks ten times) Jam in Tray 1 / priority feeder (Ready / Data light blinks four times) Short paper (Ready / Data light blinks three times) Toner low (Ready / Data light blinks eight times) Replace long-life photoconductor kit (Ready / Data light blinks once) Service error (Ready / Data light blinks ten times) Printing the menu settings and network setup page To print the menu settings and network setup pages, press from the Ready state. The printer automatically prints the menu settings and network setup pages. A list of the printer settings and the current default values are printed on the menu settings page. The current default settings are marked with an asterisk. The network setup page confirms the network Status is "Connected" and lists the current network settings. Restoring factory defaults This function will return most of the settings back to their factory values. The display language and the settings in the Network and USB menus are not returned to the factory defaults. To restore the printer to the original factory defaults, press and hold seconds. for more than three Note: Before restoring the factory defaults, make sure the host computer or network has stopped sending information to the printer. Printing the menu settings and network setup page 3