Lexmark E234 User's Guide - Page 91
Direct printing using Windows 98SE/Me, Windows NT 4.0, Windows 2000, Windows XP
View all Lexmark E234 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Direct printing using Windows 98SE/Me, Windows NT 4.0, Windows 2000, Windows XP, and Windows Server 2003 Printer Clients To install a custom printer driver and network port: 1 Insert the drivers CD into the CD-ROM drive of your computer. If the CD does not auto launch, click Start Æ Run, and then type D:\Setup.exe in the Run dialog box (where D: is the letter of your CD-ROM drive). 2 Click Install Software. 3 Click Printer and Software. 4 Click Agree to accept the license agreement. 5 Select Suggested, and then click Next. The Suggested option is the default installation for local and network-attached setup. If you need to install utilities, change settings, or customize device drivers, select Custom, and follow the instructions on your screen. 6 Select Network Attached, and then click Next. 7 If prompted, select the printer you are setting up, and then click Next. Note: The port may be identified by a printer ID/host name or by the IP address of the printer. 8 Select the port you want to use, and then click Finish. If your port is not listed, or you prefer to use a standard TCP/IP port, complete the following steps: a Click Add Port. b Select the port type. c Enter the port name and IP address for the new port. If you don't know the IP address, print a network setup page and look under the TCP/IP heading. For help, see "How to print a network setup page" on page 94. 9 Click Done. 10 Print a test page to verify printer installation (see "How to print a test page" on page 88). Software and network tasks 91