Lexmark E460DW Printing guide
Lexmark E460DW - Mono Laser Printer Manual
 |
UPC - 734646083669
View all Lexmark E460DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Lexmark E460DW manual content summary:
- Lexmark E460DW | Printing guide - Page 1
Page 1 of 10 Printing guide This section explains how to load the 250-sheet tray, the 550-sheet tray, and the multipurpose feeder. a job prints or while Busy appears on the display. Doing so may cause a jam. 2 Squeeze and slide the guides to the correct position for the paper size you are loading. - Lexmark E460DW | Printing guide - Page 2
. If you are loading A6-size paper: a Squeeze and slide the length guide toward the center of the tray to the A5 size position. b Raise the 2. Note: Use the size indicators on the bottom of the tray to help position the guide. 3 Flex a stack of paper back and forth to loosen the sheets, and then - Lexmark E460DW | Printing guide - Page 3
the paper stack toward the back of the tray as shown with the recommended print side facedown. Note: The maximum fill line on the width guide indicates the maximum height for loading paper. Do not load A6-size paper to the maximum fill line; the tray holds only 150 sheets of - Lexmark E460DW | Printing guide - Page 4
6 Insert the tray. Printing guide Page 4 of 10 7 If the paper type you loaded differs from the type that was previously loaded in the tray, then change the Paper Size/ - Lexmark E460DW | Printing guide - Page 5
2 Grasp the raised handle, and pull the extension forward. Printing guide Page 5 of 10 3 Grasp the handle, and pull the extension so it flips forward. 4 Guide the extension down gently so the multipurpose feeder is extended fully and open. - Lexmark E460DW | Printing guide - Page 6
Loading the multipurpose feeder 1 Squeeze the tab located on the right width guide, and move the guides out fully. Printing guide Page 6 of 10 2 Prepare the paper or specialty media for loading. • Flex sheets of paper or paper labels back and forth to loosen them, and - Lexmark E460DW | Printing guide - Page 7
or specialty media under the stack height limiters which are located on the guides. • Load paper, transparencies, and card stock with the recommended print side faceup and the top edge entering the printer first. For more information on loading transparencies, see the packaging the transparencies - Lexmark E460DW | Printing guide - Page 8
orientation for loading envelopes. Warning-Potential Damage: Never use envelopes with stamps, clasps, snaps, windows, coated linings, or self-stick adhesives. These envelopes may severely damage the printer. 4 Squeeze the tab located on the right width guide to adjust the guides to lightly touch the - Lexmark E460DW | Printing guide - Page 9
printer is on and Ready appears. 2 From the printer software application, set the paper type, size, and source according to the specialty media you loaded. Do one of the following: For Windows users a With a document open, click File Print. b Click Properties, Preferences, Options, or Setup - Lexmark E460DW | Printing guide - Page 10
or Copies & Pages pop-up menu, choose Printer Features. 3 From the Feature Sets pop-up menu, choose Paper. 4 From the Paper type pop-up menu, choose a paper type. 5 Click Print. In Mac OS 9: 1 Customize the settings as needed in the Page Setup dialog: a With a document open, choose File > Page
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
 |
 |
Printing guide
This section explains how to load the 250-sheet tray, the 550-sheet tray, and the multipurpose feeder. It also includes
information about paper orientation, setting the Paper Size and Paper Type, and linking and unlinking trays.
Loading trays
1
Pull the tray completely out.
Note:
Do not remove trays while a job prints or while
Busy
appears on the display. Doing so may cause a jam.
2
Squeeze and slide the guides to the correct position for the paper size you are loading.
Printing guide
Page 1 of 10