Lexmark Forms Printer 2481 Technical Reference - Page 75
Format, Printer Control
View all Lexmark Forms Printer 2481 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Name ESC 3 ESC A ESC b Dec 27 51 n Hex 1B 33 n 27 65 1B 41 27 98 m 1B 62 m n1...n16 0 n1...n8 00 Description Set Graphics Line Spacing - 248x only Use a line spacing of 24/216 for bit-image graphics using 8 bits. n must be a 1-byte decimal value from 0 to 255. To move exactly n/216 inch per line, n must be an integer multiple of 3. Set Graphics Line Spacing - 249x only Sets line spacing to n/180 inches per line. Set n/72 Inch Line Spacing Sets line spacing to n/72 inch for subsequent line feed command. The value of n must be between 0 and 85. Set Vertical Tabs in Channel Sets vertical tab stops in specified channel by m. m must be a one-byte decimal value from 0 to 7. Page Format Name ESC C 0 ESC C ESC N ESC O Dec Hex Description 27 67 0 m 1B 43 00 m Set Page Length to m Inches 27 67 n 1B 43 n Set Page Length to n Lines 27 78 n 1B 4E n Set Skip Perforation Creates a bottom margin by skipping n lines. Valid values of n are 0 through 255. 27 79 1B 4F Cancel Skip Perforation Cancels the skip perforation function. Printer Control Name ESC s ESC EM Dec 27 115 27 25 n Hex 1B 73 1B 19 n Description Turn Half Speed Mode On/Off -248x only Auto Sheet Feeder On/Off ESC B FF n=0 Off n=4 On n=R Eject 27 66 0 n1 1B 42 0 n1, Set Vertical Tab Stops n2...n16 0 n2...n16 00 Sets up to 16 tab stops. The sequence ends with 0. 12 0C Form Feed Advances the paper to the top of the next page. 75 Section 4: Epson Emulation Mode Printer Commands