Lexmark Interact S602 User's Guide - Page 42
Printing photos from a PictBridge-enabled digital camera, Notes, More Options, Accept
View all Lexmark Interact S602 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Printing photos from a PictBridge-enabled digital camera PictBridge is a technology available in most digital cameras that lets you print directly from your digital camera without using a computer. 1 Insert one end of the USB cable into the camera. Note: Use only the USB cable that came with the camera. 2 Insert the other end of the cable into the PictBridge port on the front of the printer. Notes: • Make sure that the PictBridge-enabled digital camera is set to the correct USB mode. If the camera USB selection is incorrect, then the camera is detected as a flash drive, or an error message is displayed on the printer control panel. For more information, see the camera documentation. • The printer reads only one memory device at a time. Warning-Potential Damage: Do not touch any cables, any network adapter, any connector, the memory device, or the printer in the areas shown while actively printing, reading, or writing from the memory card. A loss of data can occur. 3 If the PictBridge connection is successful, then the following message appears on the display: Camera Connected. Use Camera to choose and print photos. 4 If you want to change the default print settings: a Touch More Options to access the PictBridge menu. b Select the paper source, paper size, paper type, photo size, quality, and layout of the photos that you want to print. Touch Accept each time you make a selection. Note: The printer will use the default print settings unless you change the print settings from the camera. 5 See the documentation for your camera to begin printing. Note: If you insert the camera while the printer is performing another job, then wait for the job to finish before printing from the camera. Printing 42