Lexmark Interact S605 User's Guide - Page 129
For Macintosh users, For Windows users, Start, Enter, Repair, Diagnose, System Preferences, Network
View all Lexmark Interact S605 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 129 highlights
Try the following: a Click , or click Start and then click Run. b In the Start Search or Run box, type ncpa.cpl, and then press Enter. c Press Enter or click OK. d Select the appropriate connection from the ones shown. e Right-click the connection, and then click Repair or Diagnose. For Macintosh users 1 Make sure AirPort is turned on: From the Apple menu, navigate to: System Preferences > Network The AirPort status indicator should be green. Notes: • Yellow means the port is active but not connected. • Red means the port has not been configured. 2 Obtain the IP address of the access point: a From the Apple menu, navigate to: About This Mac > More Info b From the Contents pane, choose Network. c From the Active Services list, choose AirPort. The bottom pane lists the details of the AirPort connection. d Write down the Router entry. The Router entry is typically the access point. 3 Ping the access point: a From the Finder, navigate to: Utilities > Network Utility > Ping tab b In the network address field, type the IP address of the access point. For example: 10.168.1.101 c Click Ping. 4 If the access point responds, then you will see several lines that display the number of bytes received from the access point. This means that your computer is connected to the access point. If the access point does not respond, then nothing is displayed. You can use Network Diagnostics to help resolve the problem. MAKE SURE YOUR COMPUTER CAN COMMUNICATE WITH THE PRINTER For Windows users 1 Obtain the printer IP address. a From the printer, print a network setup page. For more information, see the User's Guide. b In the TCP/IP section, look for Address. Troubleshooting 129