Lexmark MS510 Forms and Bar Code Card Technical Reference Guide - Page 21

Command Esc(s#V or AEC)s#V Esc(s#1,#2,#3,#4B or AEC)s#1,#2,#3,#4B Esc(s#1,#2,#3,#4S or AEC)s#1,#2,#3,#4S Function/Parameters Selects the height of the bar in points (1/72 inch). Except in symbologies where #V is a fixed value, the bar height can be varied from a minimum of 3 points (0.04 inch, 1 mm) to a maximum of 960 points (13.33 inch, 33 cm). Example: Esc(s36v24750T Selects the Codabar symbology with a bar height of 0.5 inch. Since parameters p, b, s, and h are not specified, their values default to: p b1, s1 b2, s2 h Do not print text 0.01 inch 0.03 inch Not applicable because of #p parameter value Selects bar widths in dots (1/600 inch). Some bar codes require only two values for this command. Others require all four values. 1 = First (narrowest) width 2 = Second width 3 = Third width 4 = Fourth width Example: Esc(s3,9b24640T Selects the Interleaved 2 of 5 symbology with narrow bars 3 dots wide, and wide bars 9 dots wide. Since parameters v, p, s, and h are not specified, their values default to: v 0.4 p Do not print text s1 0.01 inch s2 0.03 inch h Not applicable because of #p parameter value Selects space widths in dots (1/600 inch). Some bar codes, such as Interleaved 2 of 5 and Code 3 of 9, require only two values for this command. Others, such as UPC, EAN and Code 128, require all four values. 1 = First (narrowest) width 2 = Second width 3 = Third width 4 = Fourth width Example: Esc(s4p8,16,24,32s8,16,24,32b24700T Selects Code 128 autoswitch with text printed under the bar code, space widths set to 8, 16, 24, and 32 dots, and bar widths set to 8, 16, 24, and 32 dots. Since parameters v and h are not specified, their values default to: v 0.4 h Automatically sized Courier Bold One-dimensional bar codes 21