Lexmark MS510 Quick Reference - Page 13
Understanding jam messages and locations, [x]- jam, open front door. [20y.xx], Notes
View all Lexmark MS510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
• Make sure the paper size and type are set correctly on the Embedded Web Server or the computer. Note: Depending on your operating system, access the Paper menu using Local Printer Settings Utility or Printer Settings. • Store paper according to manufacturer recommendations. Understanding jam messages and locations When a jam occurs, a message indicating the jam location and information to clear the jam appears on the printer display. Open the doors, covers, and trays indicated on the display to remove the jam. Notes: • When Jam Assist is set to On, the printer automatically flushes blank pages or pages with partial prints to the standard bin after a jammed page has been cleared. Check your printed output stack for discarded pages. • When Jam Recovery is set to On or Auto, the printer reprints jammed pages. However, the Auto setting does not guarantee that the page will print. 1 2 6 5 Area Printer control What to do panel message 1 Standard bin [x]‑page jam, clear Remove the jammed standard paper. bin. [20y.xx] 2 Rear door [x]‑page jam, open Open the rear door, and rear door. [20y.xx] then remove the jammed paper. 3 Tray 1 [x]‑page jam, remove tray 1 to clear duplex. [23y.xx] Pull tray 1 completely out, then push the front duplex flap down, and then remove the jammed paper. Note: You may need to open the rear door to clear some 23y.xx paper jams. 4 Tray [x] [x]‑page jam, remove tray [x]. [24y.xx] Pull the indicated tray out, and then remove the jammed paper. 5 Multipurpose [x]‑page jam, clear Remove all paper from feeder manual the multipurpose feeder. [250.xx] feeder, and then remove the jammed paper. 6 Front door [x]‑page jam, open front door. [20y.xx] Open the front door, then remove the toner cartridge, imaging unit, and jammed paper. [x]‑page jam, open front door. [20y.xx] CAUTION-HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot component, allow the surface to cool before touching it. 1 Press the button on the right side of the printer, and then open the front door. 1 2 2 Pull out the toner cartridge using the handle. 3 4 13