Lexmark MS810 Quick Reference - Page 18

• Hold transparencies by the edges. Straighten the edges on a level surface. Note: Avoid touching the printable side of the transparencies. Be careful not to scratch them. • Flex the stack of envelopes back and forth to loosen them. Straighten the edges on a level surface. Without an optional staple finisher With an optional staple finisher ABC Two‑sided (duplex) printing Two‑sided (duplex) printing • Load envelopes with the flap side down and on the left of the multipurpose feeder. LTR A5 A 4 EXECB5 4 Prepare the paper or specialty media for loading. • Flex sheets of paper back and forth to loosen them. Do not fold or crease the paper. Straighten the edges on a level surface. 5 Load the paper or specialty media. Note: Slide the stack gently into the multipurpose feeder until it comes to a stop. • Load only one size and type of paper or specialty media at a time. • Make sure the paper fits loosely in the multipurpose feeder, lies flat, and is not bent or wrinkled. • There are different ways of loading letterhead depending on whether an optional staple finisher is installed or not. Without an optional staple finisher With an optional staple finisher ABC ABC One‑sided printing 18 One‑sided printing Warning-Potential Damage: Never use envelopes with stamps, clasps, snaps, windows, coated linings, or self‑stick adhesives. These envelopes may severely damage the printer. B 5 C E X E 5 A A 4 LTR