Lexmark MS812dn MS810 Series Disassembly of Waste Electrical and Electronic Eq - Page 2
Disassembly tools, Disassembly references
View all Lexmark MS812dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
Plastic containing brominated flame retardants Asbestos waste and components which contain asbestos Cathode ray tubes 3 Fans; 11 Sensors; 8 Fuser parts 0 Fan(s) and Sensors (locations illustrated in 4.2) Plastic parts located in the fuser assembly marked with recycle code that includes "FR17"or "FR16" N/A 0 N/A Chlorofluorocarbons (CFC), Hydrochlorofluorocarbons 0 (HCFC) or Hydrofluorocarbons (HFC), Hydrocarbons (HC) Gas discharge lamps 0 Liquid Crystal Display (LCD) greater than 100 cm2 and 1 those back-lighted with Gas discharge lamps External electrical cables 1 Components containing refractory fibres 0 Components containing radioactive substances 0 Electrolyte capacitors containing substances of 4 concern1 1With (height > 25 mm, diameter > 25 mm or proportionately similar volume) N/A N/A MS812de LCD located inside OP panel Power cord located on the back lower left quadrant N/A N/A Capacitor(s) located on Power Supply (locations illustrated in 4.2) 3. Disassembly tools Item #2 Phillips screwdriver, magnetic Wire cutter E-clip puller or small flat-head screwdriver Standard slotted head screwdriver 4. Disassembly references 4.1. Removal procedure(s) MS710, MS810 WEEE removal WEEE materials and components removal procedures are available upon request. Contact: [email protected] 4.2. Graphical illustration of material's and component's location See next page Doc No.: Rev. 001 Page 2 of 17