Lexmark MX421 Embedded Web Server Administrator s Guide - Page 20
Creating a shortcut, Managing Scan Center destinations
View all Lexmark MX421 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Lexmark Confidential until announced Scanning 20 Creating a shortcut Note: You may need administrative rights to create a shortcut. 1 Open a web browser, and then type the printer IP address in the address field. Notes: • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123. • If you are using a proxy server, then temporarily disable it to load the web page correctly. 2 Click Shortcuts > Add Shortcut. 3 Select a shortcut type, and then configure the settings. 4 Click Save. Managing Scan Center destinations You may need administrative rights to configure the application. Configuring a network destination 1 From the Embedded Web Server, navigate to the configuration page for the application: Apps > Scan Center > Configure Note: This application is supported only in some printers. 2 Click Network Folder > Create Network Folder. 3 Select the connection type, and then do either of the following: • For SMB, type or browse to the network folder. • For FTP or SFTP, type the FTP address and the port number. Note: For SFTP, set the port number to 22. 4 Configure the settings. 5 Click Save. Notes: • To use the home directory attribute in the Folder Address field, type % before and after the attribute. For example, %customAttribute%. You can also use other LDAP attributes such as %cn sAMAccountName%, and %userPrincipalName%. • To edit a destination, select it from the list. • To delete a destination, click beside it. • You can also prevent users from creating or editing destinations using the printer control panel.