Lexmark MX611 Print Defects Guide - Page 1

Print Defects Guide Page 1 of 1 Print Defects Guide Identifying supplies or parts for replacement Match a set of repeating defects on a print job to the marks on one of the vertical lines. The line that best matches the defects on the print job indicates which particular part is causing the defect. Note: The imaging unit is a customer replaceable unit. If the fuser needs replacement, then contact customer support at http://support.lexmark.com or your service representative. Replace fuser Replace the imaging unit 80 mm (3.15 in.) 97 mm (3.82 in.) 47 mm (1.85 in.) 38 mm (1.5 in.)