Lexmark MX912 MS911, MX910 Series Disassembly of Waste Electrical and Electron - Page 2

Toner cartridges, liquid and pasty, as well as colour 5 toner Plastic containing brominated flame retardants Multiple Asbestos waste and components which contain 0 asbestos Cathode ray tubes 0 Chlorofluorocarbons (CFC), Hydrochlorofluorocarbons 0 (HCFC) or Hydrofluorocarbons (HFC), Hydrocarbons (HC) Gas discharge lamps 0 Liquid Crystal Display (LCD) greater than 100 cm2 and 1 those back-lighted with Gas discharge lamps External electrical cables 1 Components containing refractory fibres 0 Components containing radioactive substances 0 Electrolyte capacitors containing substances of 0 concern1 1With (height > 25 mm, diameter > 25 mm or proportionately similar volume) 4 Toner cartridges 1 Waste toner bottle See Appendix A N/A N/A N/A N/A N/A Power cable - Rear side of the device N/A N/A N/A 3. Disassembly tools Item #2 Phillips screwdriver, magnetic Wire cutter E-clip puller or a small flat-head screwdriver 4. Disassembly references 4.1. Removal Procedures MS91x and MX91x Series WEEE removal WEEE materials and components removal procedures are available upon request. Contact: [email protected] 4.2. Graphical illustration of material's and component's location See next page Doc No.: Rev. 003 Page 2 of 26