Lexmark MX931 Paper and Specialty Media Guide

Lexmark MX931 Manual

Get Lexmark MX931 PDF manuals and user guides View all Lexmark MX931 manuals
Add to My Manuals
Save this manual to your list of manuals

Lexmark MX931 manual content summary:

  • Lexmark MX931 | Paper and Specialty Media Guide - Page 1
    Paper and Specialty Media Guide Laser Printers October 2022 www.lexmark.com
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 2
    and verification of operation in conjunction with other products, programs, or services, except those expressly designated by the manufacturer, are the user's responsibility. For Lexmark technical support, go to http://support.lexmark.com. For information on Lexmark's privacy policy governing the use
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 3
    paper 12 Paper...12 Recycled paper...14 Card stock...15 Envelopes...17 Labels...18 Troubleshooting...27 Transparencies...28 Unacceptable paper...28 Storing paper...29 Printer-specific paper support 30 Lexmark B3340, B3442, M1342, MB3442, MS331, MS431, MS439, MX331, MX431, MX432, XM1342, XM3142
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 4
    Contents 4 Lexmark MB2338, MB2442, MX321, MX421, XM1242 MFPs 123 Lexmark MB2546, MB2650, MX521, MX522, MX622, XM1242, XM1246, XM3250 MFPs......... 128 Lexmark C9235, CS921, CS923, CS927, CX921, CX922, CX923, CX924, CX927, XC9225, XC9235, XC9245, XC9255, XC9265 Printers and MFPs 132 Lexmark C6160
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 5
    quantities. Doing so helps you avoid unexpected printing problems. Document change history Date October 2022 May 2022 February 2022 January 2021 Changes Added support information for the following products: MX432, XM3142. Added support information for the following products: CS943, CX930, CX931
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 6
    MS821, MS822, MS823, MS825, MS826, MX721, MX722, MX725, MX822, MX826, XC2235, XC2240, XC4240, XM5365, XM5370, XM7355, XM7370. April 2018 Added support information for the following products: B2338, B2442, B2546, B2650, M1242, M1246, M3250, MB2338, MB2442, MB2546, MB2650, MS321, MS421, MS521, MS621
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 7
    Paper that is heavier and more dense may cause paper jams or feed reliability problems in some printers. To verify that the paper basis weight being used is acceptable, see the supported paper weights table in "Printer-specific paper support" on page 30. Not all basis weights are related to the same
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 8
    weights, but materials either too light or too heavy can cause printing problems. Heavy and thicker materials may not heat quickly enough in the fuser, path turns. For more information about the weights your printer supports, see the individual printer specifications in this document. Dimensions
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 9
    the curl not to exceed 3 mm (0.125 in.). Lighter materials, such as paper labels and some integrated forms, are more likely to have printing problems if curl is present. Most label manufacturers recommend printing in a temperature from 18-24°C (65-75°F) with relative humidity of 40-60 percent
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 10
    the 0.50‑inch space we recommend leaving at the top of the form for printers with a corner buckler system. Use micro‑perfs to avoid nesting problems. Make sure that perforations fall outside the 0.12-0.91‑inch area on the leading edge of the media.
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 11
    Design considerations for purchasing paper 11 A B A Pick roller location B Feed direction Debossing and embossing Avoid debossing and embossing materials. The use of these materials may lead to nesting and double‑sheet feeds, and the fusing process significantly reduces the height of the raised
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 12
    can create printing problems. Continuous printing on labels, for example, may result in more frequent service calls. The rollers Use the appropriate paper to prevent jams and help ensure trouble‑free printing. • Always use new, undamaged paper. Supported paper weights" topic for your printer model.
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 13
    for paper to curl at its edges. Excessive curl can cause paper feeding problems. Curl can occur after the paper passes through the printer, where it the width of the paper. For recommended grain direction, see the "Supported paper weights" topic. Fiber content Most high‑quality xerographic paper is
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 14
    Guidelines for selecting and using paper 14 Recycled paper As an environmentally conscientious company, we support the use of recycled paper produced specifically for use in laser (electrophotographic) printers. While no blanket statement can be made that all recycled paper
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 15
    paper properly, resulting in poor print quality. Depending on your printer model, material thicker than 0.30 mm (0.012 in.) may present feed reliability problems, and material thicker than 0.17 mm (0.007 in.) may reduce print quality. Contact your supplier to determine the weight of any card stock
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 16
    For lighter card stocks, we recommend grain long to reduce potential curl problems. Curl may decrease the ability of the form to move reliably through the printer . Most printers feed paper short edge first. If your printer supports larger paper sizes, such as 11 x 17 in. or A3, it
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 17
    135 g/m2. A B B A Feed direction B Grain direction For more information about the recommended grain direction for card stock, see "Printer-specific paper support" on page 30. Coatings Surface texture and coatings on card stock significantly affect toner adhesion (fuse grade), print quality, and
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 18
    paper 18 • Use only new envelopes from undamaged packages. • Adjust the guides to fit the width of the envelopes. • Flex, fan, and align or laid finishes For more information about envelope support for your printer, see "Printer-specific paper support" on page 30. Labels Labels or pressure‑sensitive
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 19
    about labels and laser printers to ensure that you are using the proper type of labels. For more information about label support for your printer, see "Printer-specific paper support" on page 30. Label components Labels are composed of three basic parts: the liner, the adhesive, and the face sheet
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 20
    for cut‑sheet label printers. The major adhesive‑related printing problem is printer and cartridge contamination. The adhesives are semiliquid and or releasing fumes. To avoid exposing adhesive to the paper path guides, drive rollers, charge roller, photoconductor drum, transfer roller, and detack
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 21
    Guidelines for selecting and using paper 21 Face sheet (printable stock) Paper, vinyl, and polyester are the most common materials used for printable stock. Printable stock must withstand temperature up to 225°C (437°F) and pressures up to 25 psi. For more information, see your label supplier.
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 22
    Guidelines for selecting and using paper 22 Face type Total weight of label Edge matrix removal Location of strip Paper* (cut sheet or dual web) Vinyl 140-180 g/m2 265-300 g/m2 1.6 mm (0.0625 in.) 215.9 mm (8.5 in.) at leading edge 279.4 mm (11 in.) at driver edge (left margin side)
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 23
    labels peeling off the label inside the printer, which requires printer servicing. Materials, which have liner face melt temperatures lower than the fuser trailing edge stripped areas to be 1.6 mm maximum due to feeding problems. We recommend that the liner face is constructed with material that can
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 24
    bleed, recognizable by a discolored face sheet, can be a problem with these forms. Oil may also migrate from the top to , which could void the printer and cartridge service warranties. Do not feed labels through the labels, see "Printer-specific paper support" on page 30. Maintenance procedures Note
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 25
    to protect against contamination or buildup. Contamination results in paper feed problems and jams. We recommend the use of label sheets that have on the guide surface that provides the best support. • The incidence angle of the leading edge of the media as it touches the primary guide surface
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 26
    Guidelines for selecting and using paper 26 • The primary rib pattern should not have any ribs closer than 3 mm (0.12 in.) to the outside edge of paper and envelopes. This rib allowance keeps the media from stubbing into a rib that is too close to the edge of the media. • The maximum rib spacing
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 27
    The following table provides solutions to some common card stock and label problems. For more troubleshooting information, see your printer documentation. Problem Solution Print on heavy stock is blurred or out of focus. Make sure the Paper Type setting is correct for your print material
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 28
    . • Avoid getting fingerprints on the transparencies to prevent print quality problems. • Flex, fan, and align the sheets before loading. Doing or melting. For more information about transparency support for your printer, see "Printer-specific paper support" on page 30. Unacceptable paper Test results
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 29
    Guidelines for selecting and using paper 29 Storing paper Use these paper storage guidelines to help avoid jams and uneven print quality: • Store paper in its original wrapper in the same environment as the printer for 24 to 48 hours before printing. • Extend the time several days if the storage
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 30
    (SEF) X 148 x 210 mm (5.83 x 8.27 in.) A5 Landscape (LEF)1 X 210 x 148 mm (8.27 x 5.83 in.) A6 X 105 x 148 mm (4.13 x 5.83 in.) 1 The default support is long‑edge feed. 2 Paper must at least be 210 mm (8.27 in.) wide and 279.4 mm (11 in.) long for two‑sided printing. 3 When
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 31
    .9 x 359.92 mm (3.9 x 5.83 in. to 8.5 x 14.17 in.) X 2 Universal3 X X 105x 148 mm to 215.9 x 355.6 mm (4.13 x 5.83 in. to 8.5 x 14 in.) X X 1 The default support is long‑edge feed. 2 Paper must at least be 210 mm (8.27 in.) wide and 279.4 mm (11 in.) long for two‑sided printing. 3 When
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 32
    Envelope 176 x 250 mm (6.93 x 9.84 in.) X X X X Other Envelope X X 98.4 x 162 mm to 176 x 250 mm (3.87 x 6.38 in. to 6.93 x 9.84 in.) X X 1 The default support is long‑edge feed. 2 Paper must at least be 210 mm (8.27 in.) wide and 279.4 mm (11 in.) long for two‑sided printing. 3 When
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 33
    X X X Rough envelope X X X X * One‑sided paper labels are supported for occasional use of less than 20 pages per month. Vinyl, pharmacy, or two‑ sided labels are not supported. Supported paper weights Paper weight Standard 250‑sheet tray 60-120 g/m2
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 34
    105 x 148 mm (4.13 x 5.83 in.) X X X 1 Executive 184.2 x 266.7 mm (7.25 x 10.5 in.) X 2 1 Loads only in short‑edge orientation. 2 Loads only in long‑edge orientation. 3 Supports paper sizes ranging from 139.7 x 181.86 mm (5.5 x 7.16 in.) to 296.93 x 431.8 mm (11.69 x 17 in
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 35
    X X X 1 X X 2 X X X 2 X X 1 2 X 3 4 5 7 3/4 Envelope X X 2 98.4 x 190.5 mm (3.875 x 7.5 in.) 1 Loads only in short‑edge orientation. 2 Loads only in long‑edge orientation. 3 Supports paper sizes ranging from 139.7 x 181.86 mm (5.5 x 7.16 in.) to 296.93 x 431.8 mm (11.69 x 17 in
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 36
    x 229 mm (6.38 x 9.01 in.) DL Envelope X X 2 110 x 220 mm (4.33 x 8.66 in.) 1 Loads only in short‑edge orientation. 2 Loads only in long‑edge orientation. 3 Supports paper sizes ranging from 139.7 x 181.86 mm (5.5 x 7.16 in.) to 296.93 x 431.8 mm (11.69 x 17 in
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 37
    2 182 x 257 mm (7.17 x 10.1 in.) Ledger1 X 279.4 x 4431.8 mm (11 x 17 in.) 1 Loads only in short‑edge orientation. 2 Loads only in long‑edge orientation. 3 Supports paper sizes ranging from 139.7 x 181.86 mm (5.5 x 7.16 in.) to 296.93 x 431.8 mm (11.69 x 17 in.).
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 38
    Printer-specific paper support 38 Paper size Legal1 215.9 x 355.6 mm (8.5 x 14 in.) Letter 215.9 x 279 in.) X X X 1 Loads only in short‑edge orientation. 2 Loads only in long‑edge orientation. 3 Supports paper sizes ranging from 139.7 x 181.86 mm (5.5 x 7.16 in.) to 296.93 x 431.8 mm (11.69 x
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 39
    Printer-specific paper support 39 Paper sizes supported by the output bins Paper size Standard bin Upper 17 in.) 1 Loads only in short‑edge orientation. 2 Loads only in long‑edge orientation. 3 Supports paper sizes ranging from 88.9 x 98.38 mm (3.5 x 3.87 in.) to 296.93 x 482.6 mm (11.69 x 19
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 40
    Printer-specific paper support 40 Paper size Legal1 215.9 x 355.6 mm (8.5 x 14 in.) Letter 215.9 x 279.4 mm (8.5 x .) 1 Loads only in short‑edge orientation. 2 Loads only in long‑edge orientation. 3 Supports paper sizes ranging from 88.9 x 98.38 mm (3.5 x 3.87 in.) to 296.93 x 482.6 mm (11.69 x 19
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 41
    from 202.9 x 182.03 mm (7.99 x 7.17 in.) to 296.93 x 431.8 mm (11.69 x 17 in.). 6 Supports only up to 2‑hole punching. 7 Supports only up to 2‑hole punching when loaded in short‑edge orientation. 8 Supports paper sizes ranging from 88.9 x 98.38 mm (3.5 x 3.87 in.) to 320.04 x 1320.8 mm (12.6 x 52
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 42
    from 202.9 x 182.03 mm (7.99 x 7.17 in.) to 296.93 x 431.8 mm (11.69 x 17 in.). 6 Supports only up to 2‑hole punching. 7 Supports only up to 2‑hole punching when loaded in short‑edge orientation. 8 Supports paper sizes ranging from 88.9 x 98.38 mm (3.5 x 3.87 in.) to 320.04 x 1320.8 mm (12.6 x 52
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 43
    paper sizes ranging from 209.97 x 148 mm (8.27 x 5.83 in.) to 296.93 x 431.8 mm (11.69 x 17 in.). Supported paper types Paper types supported by the standard tray, MPF, envelope tray, and two‑sided printing Paper type Standard Multipurpose feeder Envelope tray 520‑sheet tray Two‑sided
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 44
    Rough Envelope Rough Cotton Vinyl Labels Standard 520‑sheet tray X X Multipurpose feeder Envelope tray X X X X X X X X X Two‑sided printing X X X Paper types supported by the optional trays Paper type Bond Optional 520-sheet tray, Optional 2520-sheet optional 520-sheet tray tandem tray with
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 45
    2520-sheet optional 520-sheet tray tandem tray with cabinet, and optional 3 x 520-sheet tray Optional 2000-sheet tray X X X Paper types supported by the output bins Paper type Bond Stack Card Stock Colored Paper Custom Type Envelope Glossy Heavy Glossy Heavy Paper Labels Letterhead
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 46
    X X X X X X X X X X X X X X X X X X Supported paper weights 520-sheet tray, 520-sheet tray with cabinet, 3 x 520sheet tray, and 2520-sheet feeding errors, especially in more humid environments. • Two‑sided printing supports paper weight from 60-162 g/m2 (16-43‑lb bond) paper. • 100
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 47
    148 x 210 mm (5.83 x 8.27 in.) X 1 2 A6 105 x 148 mm (4.13 x 5.83 in.) X X 1 1 1 Loads only in short‑edge orientation. 2 Loads only in long‑edge orientation. 3 Supports paper sizes ranging from 99.99 x 147.99 mm (3.93 x 5.83 in.) to 296.93 x 431.8 mm (11.69 x 17 in
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 48
    .) Letter 215.9 x 279.4 mm (8.5 x 11 in.) X 2 Oficio (Mexico)1 X 215.9 x 340.4 mm (8.5 x 13.4 in.) 1 Loads only in short‑edge orientation. 2 Loads only in long‑edge orientation. 3 Supports paper sizes ranging from 99.99 x 147.99 mm (3.93 x 5.83 in.) to 296.93 x 431.8 mm (11.69 x 17 in
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 49
    x 229 mm (6.38 x 9.01 in.) DL Envelope X X 2 110 x 220 mm (4.33 x 8.66 in.) 1 Loads only in short‑edge orientation. 2 Loads only in long‑edge orientation. 3 Supports paper sizes ranging from 99.99 x 147.99 mm (3.93 x 5.83 in.) to 296.93 x 431.8 mm (11.69 x 17 in
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 50
    182 x 257 mm (7.17 x 10.1 in.) 2 2 Ledger1 279.4 x 4431.8 mm (11 x 17 in.) X X 1 1 Loads only in short‑edge orientation. 2 Loads only in long‑edge orientation. 3 Supports paper sizes ranging from 99.99 x 147.99 mm (3.93 x 5.83 in.) to 296.93 x 431.8 mm (11.69 x 17 in
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 51
    Printer-specific paper support 51 Paper size Legal1 215.9 x 355.6 mm (8.5 x 14 in.) Letter 215.9 x 279 in.) X X X 1 Loads only in short‑edge orientation. 2 Loads only in long‑edge orientation. 3 Supports paper sizes ranging from 99.99 x 147.99 mm (3.93 x 5.83 in.) to 296.93 x 431.8 mm (11.69 x
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 52
    Printer-specific paper support 52 Paper sizes supported by the output bins Paper size Standard bin Dual catch 1 Loads only in short‑edge orientation. 2 Loads only in long‑edge orientation. 3 Supports paper sizes ranging from 88.9 x 98.38 mm (3.5 x 3.87 in.) to 320.04 x 1320.8 mm (12.6 x 52 in
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 53
    Printer-specific paper support 53 Paper size Ledger1 279.4 x 4431.8 mm (11 x 17 in.) Legal1 215.9 x 355.6 mm in.) 1 Loads only in short‑edge orientation. 2 Loads only in long‑edge orientation. 3 Supports paper sizes ranging from 88.9 x 98.38 mm (3.5 x 3.87 in.) to 320.04 x 1320.8 mm (12.6 x 52 in
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 54
    paper sizes ranging from 88.9 x 98.38 mm (3.5 x 3.87 in.) to 296.93 x 431.8 mm (11.69 x 17 in.). Paper sizes supported by the staple finisher and the staple, hole punch finisher Paper size Staple finisher Staple, hole punch finisher Stack Offset Staple Stack Offset Staple Hole
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 55
    202.9 x 182.03 mm (7.99 x 7.17 in.) to 296.93 x 431.8 mm (11.69 x 17 in.). 6 Supports only up to two‑hole punching. 7 Supports only up to two‑hole punching when loaded in short‑edge orientation. 8 Supports paper sizes ranging from 88.9 x 98.38 mm (3.5 x 3.87 in.) to 320.04 x 1320.8 mm (12
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 56
    1 Loads only in short‑edge orientation. 2 Loads only in long‑edge orientation. 3 Supports paper sizes ranging from 88.9 x 98.38 mm (3.5 x 3.87 in.) to 296 6 Supports only up to two‑hole punching. 7 Supports only up to two‑hole punching when loaded in short‑edge orientation. 8 Supports paper sizes
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 57
    paper sizes ranging from 209.97 x 148 mm (8.27 x 5.83 in.) to 296.93 x 431.8 mm (11.69 x 17 in.). Paper sizes supported by the trifold/Z‑fold finisher and the booklet finisher Paper size Trifold/Z‑fold finisher Trifold Z‑fold Stack Offset Booklet finisher Staple Hole punch Fold A3 X
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 58
    215.9 x 340.4 mm (8.5 x 13.4 in.) X 1 1 X 1 1 Loads only in short‑edge orientation. 2 Loads only in long‑edge orientation. 3 Supports only up to two‑hole punching when loaded in long‑edge orientation. 4 Supports paper sizes ranging from 202.9 x 181.86 mm (7.99 x 7.16 in.) to 320.04 x 482.94 mm
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 59
    X X 110 x 220 mm (4.33 x 8.66 in.) 1 Loads only in short‑edge orientation. 2 Loads only in long‑edge orientation. 3 Supports only up to two‑hole punching when loaded in long‑edge orientation. 4 Supports paper sizes ranging from 202.9 x 181.86 mm (7.99 x 7.16 in.) to 320.04 x 482.94 mm (12.6 x 19
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 60
    X Letterhead X Light Paper X Plain Paper X Preprinted X Recycled X Rough Envelope X X Rough Cotton X Transparencies X X X X Vinyl Labels X X X X Paper types supported by the optional trays Paper type Bond Optional 2 x 520-sheet tray Card Stock Colored Paper Custom Type
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 61
    Recycled Rough Envelope Rough Cotton Transparencies Vinyl Labels Optional 2 x 520-sheet Optional 2000-sheet tray tandem tray X X X X X X Paper types supported by the output bins Paper type Bond Stack Card Stock Colored Paper Custom Type Envelope Glossy Heavy Glossy Heavy Paper
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 62
    type Preprinted Recycled Rough Envelope Rough Cotton Transparencies Vinyl Labels Stack Standard bin Offset Dual catch bin Stack X X X X X X Paper types supported by the staple finisher and the staple, hole punch finisher Paper type Bond Stack Staple finisher Offset Staple Stack Staple
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 63
    , envelopes, and card stock always print at reduced speed. • Card stock is supported in two‑sided printing only up to 163 g/m2 (90‑lb bond). Anything heavier is supported only in one‑sided printing. • Vinyl labels are supported for occasional use only and must be tested for acceptability. Some vinyl
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 64
    to Light Paper. Failure to do so may cause excessive curl which can lead to feeding errors, especially in more humid environments. • Two‑sided printing supports paper weight from 60-162 g/m2 (16-43‑lb bond) paper. • 100% cotton content maximum weight is 90 g/m2 (24‑lb bond). Lexmark C4342, C4352
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 65
    25 x 10.5 in.) Folio 215.9 x 330.2 mm (8.5 x 13 in.) Hagaki X 100 x 148 mm (3.94 x 5.83 in.) X X X JIS B5 182 x 257 mm (7.17 x 10.1 in.) 1 Supported in both the portrait and landscape orientations. When fed in the portrait orientation, A5 is treated as narrow paper. When fed in landscape
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 66
    Envelope X 98.4 x 190.5 mm (3.875 x 7.5 in.) X X X 9 Envelope X 98.4 x 225.4 mm (3.875 x 8.9 in.) X X X 10 Envelope 104.8 x 241.3 mm (4.12 x 9.5 in.) X X 1 Supported in both the portrait and landscape orientations. When fed in the portrait orientation, A5 is treated as narrow paper
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 67
    X Monarch X 98.4 x 190.5 mm (3.875 x 7.5 in.) X X X Other Envelope4 X 98.4 x 162 mm to 176 x 250 mm (3.87 x 6.38 in. to 6.93 x 9.84 in.) X X X 1 Supported in both the portrait and landscape orientations. When fed in the portrait orientation, A5 is treated as narrow paper. When fed in
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 68
    envelopes, and card stock always print at reduced speed. • Card stock is supported in two‑sided printing only up to 163 g/m2 (90‑lb index). Anything heavier is supported only in one‑sided printing. • Vinyl labels are supported for occasional use only and must be tested for acceptability. Some vinyl
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 69
    to Light Paper. Failure to do so may cause excessive curl which can lead to feeding errors, especially in more humid environments. • Two‑sided printing supports paper weight from 60-162 g/m2 (16-43‑lb bond) paper. • 100% cotton content maximum weight is 90 g/m2 (24‑lb bond). Tray fill line
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 70
    weight 199 g/m2 (110 lb) 199 g/m2 (110 lb) 163 g/m2 (100 lb) 203 g/m2 (125 lb) 176 g/m2 (65 lb) 218 g/m2 (80 lb) Supported labels Label type Width and length Weight Thickness Smoothness Paper Vinyl 76 x 216 mm (3 x 218 g/m2 (58 lb) 8.5 in.)1 0.13-0.20 mm (0.005-0.0008 in
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 71
    optional paper sources and the sizes, types, and weights of paper that they support. Note: For an unlisted paper size, select the closest larger listed size. Supported paper sizes Paper size Standard or Manual feeder Two‑sided ADF optional printing 250‑sheet tray Scanner glass A4 210 x 297
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 72
    Printer-specific paper support 72 Paper size Standard or Manual feeder Two‑sided ADF optional printing 250‑sheet in.) 7 3/4 Envelope 5 98.4 x 190.5 mm (3.875 x 7.5 in.) X X 1 The default support is long‑edge feed. When running on short‑edge feed, A5 is treated as narrow paper. 2 When
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 73
    : • Labels, envelopes, and card stock always print at reduced speed. • Labels are supported for occasional use and must be tested for acceptability. • The ADF supports only plain paper. Paper type Plain paper Standard or optional 250‑sheet tray Manual feeder Two‑sided printing Card stock X
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 74
    74 Paper type Labels Envelopes Standard or optional 250‑sheet tray Manual feeder Two‑sided printing X X Supported paper weights Note: The ADF supports 52-90.3 g/m2 (14-24 lb bond) paper. Paper type and weight Standard or optional Manual feeder 250‑sheet tray Light paper 60-74.9 g/m2 grain
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 75
    and optional paper sources and the sizes, types, and weights of paper that they support. Note: For an unlisted paper size, select the closest larger listed size. Supported paper sizes Paper size 250‑sheet tray Manual feeder Two‑sided ADF printing Scanner glass A4 210 x 297 mm (8.27 x 11.7 in
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 76
    Printer-specific paper support 76 Paper size 250‑sheet tray Manual feeder Two‑sided ADF printing Scanner glass Executive X X 10 Envelope 5 104.8 x 241.3 mm (4.12 x 9.5 in.) X X 1 The default support is long‑edge feed. When running on short‑edge feed, A5 is treated as narrow paper. 2 This
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 77
    for occasional use and must be tested for acceptability. • The ADF supports only plain paper. Paper type Plain paper 250‑sheet tray Manual feeder Two‑sided printing Card stock X Labels X Envelopes X Supported paper weights Note: The ADF supports 52-90.3 g/m2 (14-24 lb bond) paper.
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 78
    Printer-specific paper support 78 Paper type and weight 250‑sheet tray Light paper 60- lb bond) Paper labels 131 g/m2 (35‑lb bond) Envelopes 60-105 g/m2 (16-28‑lb bond) Manual feeder Two‑sided printing X X X X Lexmark B2236 Printer and MB2236 MFP The following tables provide information on
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 79
    paper sizes Notes: • Paper less than 210 mm (8.3 in.) wide always prints at reduced speed. • Use the manual feeder when printing on paper less than 105 mm (4.1 in.) wide. • The minimum paper dimension supported for two‑sided printing is 210 x 279.4 mm (8.3 x 11 in.). • The maximum paper length
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 80
    Printer-specific paper support 80 Paper size 250‑sheet tray Manual feeder Two‑sided printing Legal 215.9 x 355.6 mm (8.5 x 14 x 6.38 in.) to 176 x 250 mm (6.93 x 9.84 in.) * This paper source supports paper size only up to 216 x 297 mm (8.5 x 11.7 in.). Scanner glass Automatic document feeder X X *
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 81
    document feeder Card stock X X X Labels X X X Bond Envelope X X X Letterhead Preprinted Colored paper Light Heavy Recycled Supported paper weights 250‑sheet tray 60-105 g/m² (16-28‑lb bond) Manual feeder Two‑sided printing 60-200 g/m² (16-54‑lb 70-105 g/m² (18.7-28‑lb bond
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 82
    the same paper sizes as the optional 550‑sheet tray. The integrated multipurpose feeder supports different paper sizes, types, and weights. Paper size and dimension Standard 250‑sheet tray Manual feeder Optional 650‑sheet duo tray Optional Two‑sided 550‑sheet tray Multipurpose 550‑sheet
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 83
    Printer-specific paper support 83 Paper size and dimension Standard 250‑sheet tray Manual feeder Optional 650‑sheet in. to 8.5 x 14 in.) X X X 1 Load this paper size into tray 1 and the manual feeder with the long edge entering the printer first. 2 Load this paper size into tray 2, tray 3,
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 84
    Printer-specific paper support 84 Paper size and dimension Standard 250‑sheet tray Manual feeder Optional 650‑sheet mm (6.93 x 9.84 in.) X X X 1 Load this paper size into tray 1 and the manual feeder with the long edge entering the printer first. 2 Load this paper size into tray 2, tray 3,
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 85
    sizes, types, and weights. • Labels, envelopes, and card stock always print at 25 pages per minute. • The ADF supports only plain paper. Paper type Standard 250‑sheet tray Manual feeder Optional 650‑sheet duo tray 550‑sheet tray Multipurpose feeder Optional 550‑sheet tray Two‑sided printing
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 86
    , and weights. • Labels, envelopes, and card stock always print at 25 pages per minute. • The ADF supports 52-120 g/m2 (14-32 lb bond) paper. Paper type and weight Standard 250‑sheet tray Manual feeder Optional 650‑sheet duo tray 550‑sheet tray Multipurpose feeder Optional 550‑sheet tray Two
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 87
    Printer-specific paper support 87 Paper type and weight Standard 250‑sheet tray Manual feeder Optional 650‑sheet duo tray 550‑sheet in more humid environments. 2 Labels and other specialty media are supported for occasional use and must be tested for acceptability. 3 Paper labels up to 105 g/m2 (
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 88
    Printer-specific paper support 88 Supported paper sizes Paper sizes supported by the printer Paper size A4 210 x 297 mm (8.3 x 11.7 long edge feed (LEF) is recommended over A5 short edge feed (SEF). Paper sizes supported by the output options or finishers Note: The output options and finishers are
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 89
    Printer-specific paper support 89 Paper size A4 210 x 297 mm (8.3 x 11.7 in.) A5 LEF 210 x 148 mm (8.3 x 5.8 in.) A5 SEF 148 x 210 mm (5.8 x 8.3 in.) A6 105 x 148 mm (4.1 x 5.8
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 90
    together, print up to 20 pages only. Print the succeeding pages after three minutes. Paper types supported by the output options or finishers Note: The output options and finishers are supported only in the Lexmark MS725 printer model. Paper type Plain paper Output expander or high‑capacity output
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 91
    X Rough/Cotton X X X Custom Type [x] X X X Staple, hole punch finisher Stack Staple Hole punch X X X X X X X X X X X X X X X X X X X X X X X Supported paper weights Paper weights supported by the printer Paper type and weight Standard Optional 550‑sheet 2100
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 92
    bond envelopes are limited to 25% cotton content. Multipurpose feeder Two‑sided printing Paper weights supported by the output options or finishers Note: The output options and finishers are supported only in the Lexmark MS725 printer model. Paper type and weight Output expander or high‑capacity
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 93
    in Lexmark MS725 and MX725 printer models. • Vinyl and polyester labels • Narrow media batch jobs The following table lists the maximum weights supported by the trays and the multipurpose feeder. Card stock1 Labels Index Paper source Bristol Tag Cover Paper Dual‑web paper Polyester Vinyl
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 94
    Printer-specific paper support 94 Labels Thickness 0.102-0.305 mm (0.004-0.012 in.) labels together with paper or transparencies in the same tray. Combining print materials can cause feeding problems. • Use full label sheets. Partial sheets may cause labels to peel off during printing,
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 95
    10 • "Grain orientation" on page 16 • "Maintenance procedures" on page 24 • "Troubleshooting" on page 27 • "Primary rib pattern design guidelines for reference edge alignment" on page , and weights of paper that they support. Note: For an unlisted paper size, select the closest larger listed size.
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 96
    Printer-specific paper support 96 Supported paper sizes Paper sizes supported by the printer Paper size A4 210 x 297 mm (8.3 x 11.7 in.) A5 LEF1 210 x 148 mm (8.3 x 5.8 in.) A5 SEF1 148 x 210 mm (5.8 x 8.3 in.) Standard 550‑
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 97
    edge feed (SEF). 2 Envelopes wider than 101.6 mm (4.5 in.) may crease. This paper type must be tested for acceptability. Paper sizes supported by the output options or finishers Paper size Output 4‑bin mailbox Staple finisher expander, high‑capacity Stack Staple output expander, or offset
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 98
    Printer-specific paper support 98 Paper size Oficio (Mexico) 216 x 340 mm (8.5 x 13.4 in.) Statement 140 x 216 mm (5.5 x 8.5 in.) Executive 184 x 267 mm (7.3 x 10.5 in.) Letter 216 x 279 mm (8.5 x
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 99
    Staple output expander, or offset stacker X X X X X X X X X X X X Staple, hole punch finisher Stack Staple Hole punch X X X X X X X X X X X X Supported paper types Paper types supported by the printer Paper type Plain paper Standard 550‑sheet tray, optional 250‑ or
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 100
    * To prevent transparencies from sticking together, print up to 20 pages only. Print the succeeding pages after three minutes. Paper types supported by the output options or finishers Paper type Output expander or high‑capacity output expander 4‑bin mailbox Staple finisher Stack Staple Staple
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 101
    mailbox X Custom type [x] X Staple finisher Stack Staple X X X X Staple, hole punch finisher Stack Staple Hole punch X X X X X X Supported paper weights Paper weights supported by the printer Paper type and weight Standard Optional 550‑sheet 2100‑sheet tray, optional tray
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 102
    Printer-specific paper support 102 Paper weights supported by the output options or finishers Paper type and weight Output expander or high‑capacity output expander 4‑bin mailbox Staple finisher Stack Staple Plain paper
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 103
    X X X Card stock and label guidelines Card stock and label weights support The following media types are not supported on this printer: • Vinyl and polyester labels Printing these labels can lead to print quality problems and printer damage. For applications where these labels are run, use the
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 104
    paper support 104 in the same paper tray. Combining print materials can cause feeding problems. • Use full label sheets. Partial sheets may cause labels orientation" on page 16 • "Maintenance procedures" on page 24 • "Troubleshooting" on page 27 • "Primary rib pattern design guidelines for reference
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 105
    information on standard and optional paper sources and the sizes, types, and weights of paper that they support. Note: For an unlisted paper size, select the closest larger listed size. Supported paper sizes Paper size Standard 550‑sheet tray, optional 250‑ or 550‑sheet tray Optional 2100‑sheet
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 106
    over A5 short edge feed (SEF). 2 Envelopes wider than 101.6 mm (4.5 in.) may crease. This paper type must be tested for acceptability. Supported paper types Paper type Plain paper Standard 550‑sheet tray, optional 250‑ or 550‑sheet tray Optional 2100‑sheet tray Multipurpose feeder Two‑sided
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 107
    Custom type [x] X * To prevent transparencies from sticking together, print up to 20 pages only. Print the succeeding pages after three minutes. Supported paper weights Paper type and weight Standard 550‑sheet tray, optional 250‑ or 550‑sheet tray Optional 2100‑sheet tray Plain paper or Bond1
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 108
    printing X Card stock and label guidelines Card stock and label weights support The following media types are not supported on this printer: • Vinyl and polyester labels Printing these labels can lead to print quality problems and printer damage. For applications where these labels are run, use
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 109
    109 The following table lists the maximum weights supported by the trays and the multipurpose feeder: with paper or transparencies in the same paper tray. Combining print materials can cause feeding problems. • Use full label sheets. Partial sheets may cause labels to peel off during printing
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 110
    10 • "Grain orientation" on page 16 • "Maintenance procedures" on page 24 • "Troubleshooting" on page 27 • "Primary rib pattern design guidelines for reference edge alignment" on page , and weights of paper that they support. Note: For an unlisted paper size, select the closest larger listed size.
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 111
    Printer-specific paper support 111 Supported paper sizes Paper sizes supported by the printer Paper size Standard or Optional optional 550‑sheet 2100‑sheet tray tray Multipurpose feeder Two‑sided printing A4 210 x 297 mm (8.3 x 11.7
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 112
    over A5 short edge feed (SEF). 2 Envelopes wider than 101.6 mm (4.5 in.) may crease. This paper type must be tested for acceptability. Paper sizes supported by the output options or finishers Paper size Offset stacker 4‑bin mailbox Staple finisher Stack Staple A4 210 x 297 mm (8.3 x 11.7 in.) A5
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 113
    Printer-specific paper support 113 Paper size Offset stacker 4‑bin mailbox Staple finisher Stack Staple Executive 184 x 267 mm (7.3 x 10.5 in.) Letter 216 x 279 mm (8.5 x 11 in.) Legal 216 x
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 114
    X * To prevent transparencies from sticking together, print up to 20 pages only. Print the succeeding pages after three minutes. Paper types supported by the output options or finishers Paper type Plain paper Offset stacker 4‑bin mailbox Staple finisher Stack Staple Staple, hole punch finisher
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 115
    Rough/Cotton X X X Custom type [x] X X X Staple, hole punch finisher Stack Staple Hole punch X X X X X X X X X X X X X X X X X X X X X X X X Supported paper weights Paper weights supported by the printer Paper type and weight Standard or Optional optional 2100
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 116
    must enter the printer first. 3 28‑lb bond envelopes are limited to 25% cotton content. Multipurpose feeder Two‑sided printing X Paper weights supported by the output options or finishers Paper type and weight Offset stacker 4‑bin Staple finisher mailbox Stack Staple Staple, hole punch finisher
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 117
    Printer-specific paper support 117 Paper type and weight Offset stacker 4‑bin Staple finisher mailbox Stack Staple Card stock 199 g/m² grain long (110‑lb bond) X X Card stock 176 g/m² grain
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 118
    118 Card stock and label guidelines Card stock and label weights support The following media types are not supported on this printer: • Vinyl and polyester labels Printing these labels can lead to print quality problems and printer damage. For applications where these labels are run, use the
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 119
    paper support 119 in the same paper tray. Combining print materials can cause feeding problems. • Use full label sheets. Partial sheets may cause labels " on page 16 • "Maintenance procedures" on page 24 • "Troubleshooting" on page 27 • "Primary rib pattern design guidelines for reference edge
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 120
    provide information on standard and optional paper sources and the sizes, types, and weights of paper that they support. Note: For an unlisted paper size, select the closest larger listed size. Supported paper sizes Paper size A4 210 x 297 mm (8.3 x 11.7 in.) A5 210 x 148 mm (8.3 x 5.8 in.) A5 LEF
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 121
    Printer-specific paper support Paper size Standard 550‑sheet tray Oficio (Mexico) 216 x 340 mm (8.5 x 13.4 in.) Hagaki X 100 x 148 mm (3.9 x 5.8 in.) Business card X 50.8 x 88.9 mm (2 x 3.5 in.) Statement
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 122
    Multipurpose feeder Two‑sided printing Card stock X X X Transparency X X Recycled Paper labels1 X Bond2 1 One‑sided paper labels designed for laser printers are supported for occasional use. It is recommended to print 20 or fewer pages of paper labels per month. Vinyl, pharmacy, and two
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 123
    lb) Labels* 60-120 g/m2 60-216 g/m2 N/A (16-32 lb) (16-58 lb) Envelopes N/A N/A N/A * One‑sided paper labels designed for laser printers are supported for occasional use. It is recommended to print 20 or fewer pages of paper labels per month. Vinyl, pharmacy, and two‑sided labels are not
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 124
    information on standard and optional paper sources and the sizes, types, and weights of paper that they support. Note: For an unlisted paper size, select the closest larger listed size. Supported paper sizes Paper size Standard 550‑sheet tray A4 210 x 297 mm (8.3 x 11.7 in.) A5 210 x 148
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 125
    Printer-specific paper support 125 Paper size Standard 550‑sheet tray Business card X 50.8 x 88.9 mm (2 x 3.5 in.) Statement 140 x 216 mm (5.5 x 8.5 in.) Executive 184 x 267 mm (7.3 x 10.5 in.) Letter
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 126
    feeder printing ADF Scanner glass Card stock X X X X Transparency X X X Recycled Paper labels1 X X 1 One‑sided paper labels designed for laser printers are supported for occasional use. It is recommended to print 20 or fewer pages of paper labels per month. Vinyl, pharmacy, and two
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 127
    X X 1 One‑sided paper labels designed for laser printers are supported for occasional use. It is recommended to print 20 or fewer lb) (16-58 lb) * One‑sided paper labels designed for laser printers are supported for occasional use. It is recommended to print 20 or fewer pages of paper labels
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 128
    Tray Multipurpose feeder ADF Two‑sided printing Envelopes N/A N/A 60-216 g/m2 N/A (16-58 lb) * One‑sided paper labels designed for laser printers are supported for occasional use. It is recommended to print 20 or fewer pages of paper labels per month. Vinyl, pharmacy, and two‑sided labels
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 129
    Printer-specific paper support 129 Paper size Standard 550‑sheet tray A6 105 x 148 mm (4.1 x 5.8 in.) JIS B5 182 x 257 mm (7.2 x 10.1 in.) Oficio (Mexico) 216 x 340 mm (8.5 x 13.4
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 130
    Printer-specific paper support 130 Paper size Standard 550‑sheet tray Universal 105 x 148 mm to 216 x 356 mm (4.13 x 5.83 in. to 8.5 x 14 in.) Universal X 148 x 210 mm
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 131
    Colored paper Light paper Heavy paper2 Rough/Cotton Envelope X X X X Rough envelope X X X X 1 One‑sided paper labels designed for laser printers are supported for occasional use. It is recommended to print 20 or fewer pages of paper labels per month. Vinyl, pharmacy, and two‑sided
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 132
    -216 g/m2 N/A N/A (16-32 lb) (16-58 lb) Envelopes N/A N/A 60-216 g/m2 N/A (16-58 lb) * One‑sided paper labels designed for laser printers are supported for occasional use. It is recommended to print 20 or fewer pages of paper labels per month. Vinyl, pharmacy, and two‑sided labels are not
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 133
    in short‑edge orientation. 2 This paper is loaded only in long‑edge orientation. 3 The paper source supports paper size without size sensing. 4 This paper is not supported in tray 1. 5 Two‑sided printing supports Universal sizes between 139.7 x 148 mm to 320 x 458 mm (5.5 x 5.83 in. to 12.6 x 18 in
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 134
    in short‑edge orientation. 2 This paper is loaded only in long‑edge orientation. 3 The paper source supports paper size without size sensing. 4 This paper is not supported in tray 1. 5 Two‑sided printing supports Universal sizes between 139.7 x 148 mm to 320 x 458 mm (5.5 x 5.83 in. to 12.6 x 18 in
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 135
    in short‑edge orientation. 2 This paper is loaded only in long‑edge orientation. 3 The paper source supports paper size without size sensing. 4 This paper is not supported in tray 1. 5 Two‑sided printing supports Universal sizes between 139.7 x 148 mm to 320 x 458 mm (5.5 x 5.83 in. to 12.6 x 18 in
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 136
    Printer-specific paper support Paper size A4 A5 A6 B5 Envelope C5 Envelope DL Envelope Business card Dimensions 210 x 450 mm X (12.6 x 17.7 in.) 1 This paper is loaded only in short‑edge orientation. 2 The paper source supports paper size without size sensing. 136 Scanner 2 1,2 X X X 1,2 2 2 X X
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 137
    87 in. to 11.69 x 17.00 in.) 1 This paper is loaded only in short‑edge orientation. 2 The paper source supports paper size without size sensing. Scanner 2 Paper sizes supported by the finisher Note: When a finisher is installed, the standard finisher bin becomes the default bin even for print jobs
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 138
    only if the finisher stacks the paper but does not staple or punch holes in it. 6 Paper is supported only for two‑hole punch. Supported paper types Paper types supported by the printer Note: Labels, transparencies, envelopes, and card stock always print at reduced speed. Paper type Bond 2 x 500
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 139
    Printer-specific paper support 139 Paper type Rough Envelope 2 x 500‑sheet 2500‑sheet tray 3000‑sheet tray Multipurpose tray feeder X X X Rough Cotton Transparencies1 X X X Vinyl Labels X X X X 1 Print in batches of
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 140
    Rough Cotton X X X Custom Type 1 Print in batches of only up to 20 to prevent them from sticking together. Booklet finisher X X X X X X X X X Supported paper weights Paper type Standard 550‑sheet tray Plain paper Glossy Card stock Labels N/A 2 x 500‑sheet tray 2500-sheet tray 3000‑sheet
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 141
    and optional paper sources and the sizes, types, and weights of paper that they support. Note: For an unlisted paper size, select the closest larger listed size. Supported paper sizes Supported input sizes Paper size Dimensions 3 x 5 76.2 x 127 mm (3 x 5 in.) 550‑ 2200‑ Envelope sheet tray
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 142
    X X X 215.9 x 355.6 mm Universal (5.5 x 5.8 in. to 8.5 x 14 in.) X X Universal 76.2 x 127 mm to X X X 229 x 359.9 mm (3 x 5 in. to 9 x 14.2 in.) 1 This paper source does not support automatic size sensing. 2 A5 portrait reports as Universal in the standard and optional 550‑sheet trays.
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 143
    Offset Staple Multiposition staple, hole punch finisher1 Offset Staple Hole punch 2‑bin mailbox 3 x 5 76.2 x 127 mm (3 x 5 in.) X X X X 1 This option supports only CX825, CX860, and XC8100 Series models. 2 A5 portrait reports as Universal in the standard and optional 550‑sheet trays.
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 144
    215.9 x 359.9 mm (5.5 x 5.8 in. to 8.5 x 14.2 in.) X X X X X Universal 76.2 x 127 mm to X 229 x 359.9 mm (3 x 5 in. to 9 x 14.2 in.) X X X 1 This option supports only CX825, CX860, and XC8100 Series models. 2 A5 portrait reports as Universal in the standard and optional 550‑sheet trays.
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 145
    110 x 220 mm (4.3 x 8.7 in.) X X X X X X Other Envelope 98.4 x 162 mm to 229 x 359.9 mm (3.9 x 6.4 in. to (9 x 14.2 in.) X X X X X X 1 This option supports only CX825, CX860, and XC8100 Series models. 2 A5 portrait reports as Universal in the standard and optional 550‑sheet trays
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 146
    to 176 g/m2 of card stock weight. 2 Card stock that weighs more than 176 g/m2 is supported only in one‑sided printing using the standard 550‑sheet tray. Supported output types Paper type Staple finisher Non‑finishing Offset Staple Plain Paper Multiposition staple, hole punch finisher* Standard
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 147
    lb) 1 Grain short paper that weighs at least 90 g/m2 (24 lb) is supported in two‑sided printing. 2 Recycled paper that weighs 75-120 g/m2 (20-32 lb) is supported in two‑sided printing. 3 The paper weight is also supported in two‑sided printing. 4 100% cotton content maximum weight is 24 lb bond
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 148
    28 lb‑bond envelopes are limited to 25% cotton content. Supported card stock Paper type Index Bristol Tag Cover Grain direction lb) 218 g/m2 (80 lb) 218 g/m2 (80 lb) 218 g/m2 (80 lb) Supported labels Label type Width and length Weight Thickness Smoothness Paper Dual web 76 x 216 mm (3
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 149
    in.). b 50 Sheffield is optimal. Using media higher than 300 Sheffield could result in print quality degradation. c The weight is only supported in two‑line‑printing. Letterhead orientation Source Printing Printed side Paper orientation Trays One‑sided Faceup Load paper with the top edge
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 150
    on standard and optional paper sources and the sizes, types, and weights of paper that they support. Note: For an unlisted paper size, select the closest larger listed size. Supported paper sizes Paper size Dimensions 550‑sheet tray Multipurpose feeder* A4 210 x 297 mm (8.3 x 11.7 in
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 151
    Envelope 98.4 x 162 mm to X 176 x 250 mm (3.87 x 6.38 in. to 6.93 x 9.84 in.) * This paper source does not support automatic size sensing. Two‑sided printing X X X X X X X X X ADF X X X X X X X X X X Supported paper types Note: Labels, envelopes, and card stock always print at reduced speed.
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 152
    Rough Envelope Transparency Letterhead Preprinted Colored Paper Light Paper Heavy Paper Custom Type 550‑sheet tray Multipurpose feeder ADF X X X X X X X X X X Supported paper weights Paper type Plain Paper Glossy Heavy Paper Card stock Labels Envelopes Paper weight 75-90.3 g/m2 (20-24
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 153
    media only up to the alternate paper fill indicator. Supported card stock Paper type Index Bristol Tag Cover Grain direction lb) 203 g/m2 (125 lb) 176 g/m2 (65 lb) 218 g/m2 (80 lb) Supported labels Label type Width and length Weight Thickness Smoothness Paper Vinyl 76 x 216 mm (3 x 8.5
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 154
    Printer-specific paper support Letterhead orientation Source Trays Printing One‑sided Two‑sided Multipurpose feeder One‑sided Two‑sided Printed side Faceup Facedown Facedown Faceup 154 Paper orientation Load
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 155
    of paper or stock in a standard size for that particular material. Also known as column strength. Refers to how well the material is able to support itself and remain flat and straight during the printing process. Cut flush to one another, with no extra area between. This cut does not extend
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 156
    from 100 percent chemically pulped wood. This content provides the paper with a high degree of stability resulting in fewer paper feeding problems and better print quality. Paper containing fibers such as cotton have characteristics that can result in degraded paper feeding. Qualitative measurement
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 157
    does not fuse to the paper properly, resulting in poor print quality. If the paper is too smooth, it can cause paper feeding problems in the printer. Smoothness is measured in Sheffield points; lower values indicate smoother paper. The appearance of black specks around a printed image. Generally
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 158
    21 liners 19 topcoats 21 label guidelines 18 label sizes 70, 148, 153 label smoothness 70, 148, 153 label thickness 70, 148, 153 label weights supported 70, 148, 153 labels construction 19 dual web forms 21 duplexing 25 guidelines 93, 103, 108, 118 integrated forms 21 tips 18 vinyl and polyester
  • Lexmark MX931 | Paper and Specialty Media Guide - Page 159
    29 stripped edge matrix 19, 21 supercalendering 20 supported card stock 70, 148, 153 supported labels 70, 148, 153 supported laser printers 5 supported paper sizes 30, 34, 47, 65, transparencies tips 28 tray fill line information 69, 153 troubleshooting 27 U unacceptable paper 28 V vinyl labels 21 W
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
Paper and Specialty Media Guide
Laser Printers
October 2022
www.lexmark.com