Lexmark Monochrome Laser Clearing Jams Guide - Page 1
Lexmark Monochrome Laser Manual
View all Lexmark Monochrome Laser manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
Lexmark™ W840 Clearing Jams Guide Avoiding jams The following hints can help you avoid jams: • Use only recommended print media. • Do not overload the print media sources. Make sure the stack height does not exceed the maximum height indicated by the stack line on the labels in the sources. • Do not load wrinkled, creased, damp, or curled print media. • Flex, fan, and straighten print media before you load it. If jams do occur with print media, try feeding one sheet at a time through the multipurpose feeder. • Do not use print media that you have cut or trimmed yourself. • Do not mix print media sizes, weights, or types in the same print media source. • Make sure the recommended print side is loaded in the source according to your simplex or duplex needs. • Keep print media stored in an acceptable environment. • Do not remove trays during a print job. • Push all trays in firmly after loading them. • Make sure the guides in the trays are properly positioned for the size of print media you have loaded. Make sure the guides are not placed too tightly against the stack of print media. Clearing Jams Understanding jam messages Message What to do 200, 201, and 202 Open the side door, and remove Paper Jam the jam. Check Door A 203 Paper Jam Open the side door and the Check 230 Paper Jam Check Door Lower the duplex unit, and remove the jam. Open the side door and the Exit 2 door, and remove the jam. 231 Paper Jam Check Lower the duplex unit, and remove the jam. Open the side door, and remove the jam. Clearing the 2000-sheet high capacity feeder (Tray 5) Open each tray, and remove any jammed media. 250 Paper Jam Check MP Feeder Remove all media from the multipurpose feeder, flex and stack the media, reload the multipurpose feeder, and adjust the guide. 28x Paper Jam Check Finisher Open the finisher door, bridge unit assembly, or output bin, then remove the jam. 200, 201, and 202 Paper Jam Check Door A 1 Open Door A by pushing the release latch and lowering the door. CAUTION: The inside of the printer might be hot. 2 Pull the print media up and toward you. 3 Close Door A. 4 Press . 203 Paper Jam Check 1 Open Door A by pushing the release latch and lowering the door. CAUTION: The inside of the printer might be hot. 2 Open Door E by pushing the release latch and lowering the door.