Lexmark Multifunction Laser Clearing Jams Guide

Lexmark Multifunction Laser Manual

Get Lexmark Multifunction Laser PDF manuals and user guides View all Lexmark Multifunction Laser manuals
Add to My Manuals
Save this manual to your list of manuals

Lexmark Multifunction Laser manual content summary:

  • Lexmark Multifunction Laser | Clearing Jams Guide - Page 1
    cartridge, and then remove the jam. 202 Paper Jam Open the rear door on the MFP, and Open Rear Door remove the jam. 23x Paper Jam Check Duplex Remove the duplex tray from the duplex unit, raise the duplex deflector, and remove the jam. Open the rear duplex door, and remove the jam. 24x Paper Jam
  • Lexmark Multifunction Laser | Clearing Jams Guide - Page 2
    Align and reinstall the toner cartridge. 9 Touch Continue. 202 Paper Jam Open Rear Door 1 If the paper is exiting the MFP, pull the media straight out, and then touch Continue. Otherwise, continue with step 2. 4 Close the rear door. 5 Touch Continue. 23x Paper Jam Open Duplex Rear Door 1 Open the
  • Lexmark Multifunction Laser | Clearing Jams Guide - Page 3
    , and remove any jammed media. 3 Remove any jammed pages. 2 Open the duplex tray. 250 Paper Jam Check MP Feeder 1 Remove the paper from the multipurpose feeder. 2 Flex, fan, and restack the media, and place it into the multipurpose feeder. 3 Load the print media. 4 Slide the side guide toward the
  • Lexmark Multifunction Laser | Clearing Jams Guide - Page 4
    5 Open the scan unit access door, and remove any jammed pages. 6 Close the scan unit access door. 7 Close the ADF cover.
  • 1
  • 2
  • 3
  • 4
Lexmark™ X646
Clearing Jams
Guide
Avoiding jams
The following hints can help you avoid jams:
•
Use only recommended print media.
•
Do not overload the print media sources. Make
sure the stack height does not exceed the
maximum height indicated by the stack line on
the labels in the sources.
•
Do not load wrinkled, creased, damp, or curled
print media.
•
Flex, fan, and straighten print media before you
load it. If jams do occur with print media, try
feeding one sheet at a time through the
multipurpose feeder.
•
Do not use print media that you have cut or
trimmed yourself.
•
Do not mix print media sizes, weights, or types
in the same print media source.
•
Make sure the recommended print side is
loaded in the source according to your simplex
or duplex needs.
•
Keep print media stored in an acceptable
environment.
•
Do not remove trays during a print job.
•
Push all trays in firmly after loading them.
•
Make sure the guides in the trays are properly
positioned for the size of print media you have
loaded. Make sure the guides are not placed
too tightly against the stack of print media.
Clearing jams
Understanding jam messages
200 and 201 Paper Jam Remove
Cartridge
1
Push the release latch, and lower the
multipurpose feeder.
2
Push the release latch, and open the top front
cover.
CAUTION:
The inside of the MFP may be hot.
Allow the MFP to cool before
touching any internal components.
3
Lift and pull the print cartridge out of the MFP.
Warning:
Do not touch the photoconductor
drum on the underside of the
cartridge. Use the cartridge handle
whenever you are holding the
cartridge.
4
Place the print cartridge aside.
Note:
Do not leave the cartridge exposed
to light for extended periods.
Note:
The print media may be covered
with unfused toner, which can stain
garments and skin.
Message
What to do*
200 and 201
Paper Jam
Remove
Cartridge
Open the bottom then top front
covers, remove the print cartridge,
and then remove the jam.
202 Paper Jam
Open Rear Door
Open the rear door on the MFP, and
remove the jam.
23x Paper Jam
Check Duplex
Remove the duplex tray from the
duplex unit, raise the duplex
deflector, and remove the jam. Open
the rear duplex door, and remove the
jam.
24x Paper Jam
Check Tray <x>
Open each tray, and remove any
jammed media.
250 Paper Jam
Check MP
Feeder
Remove all media from the
multipurpose feeder, flex and stack
the media, reload the multipurpose
feeder, and adjust the guide.
290, 291, 292,
and 294
Scanner Jams
Remove all original documents from
the ADF. Open the ADF cover, and
remove any jammed pages. Open
the document cover, and remove any
jammed pages. Open the scan unit
access door, and remove any
jammed pages.
* After clearing the jam, press
to resume printing.