Lexmark Optra S 1650 User's Guide (7.1 MB) - Page 319
Removing a Memory Option, Printer System Board
View all Lexmark Optra S 1650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 319 highlights
Installing Options Removing a Memory Option WARNING: Electronic components are easily damaged by static electricity. Touch something metal before you touch the memory option. 1 If necessary, follow the steps under "Accessing the Printer System Board" on page 293. 2 Locate the memory option you want to remove. 3 Push out on the metal clips at each end of the connector and rotate the memory option up to a 45° angle. Pull it out of the connector. Memory and Option Cards 4 Place the memory option in its original packaging. If you did not save the packaging, wrap it in paper and store it in a box. 5 If you need to install a replacement memory option or other option on the system board: - See "Printer Memory Option" on page 299. - See "Flash Memory Option" on page 304. - See "Option Cards" on page 308. 6 See "Closing the Printer System Board" on page 297 to reattach the shield and side door. Memory and Option Cards 303