Lexmark Optra Se 3455 User's Guide (7.1 MB) - Page 335
Removing an Option Card, Place the option card in its original packaging.
View all Lexmark Optra Se 3455 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 335 highlights
Installing Options Removing an Option Card WARNING: Electronic components are easily damaged by static electricity. Touch something metal before you touch the card. 1 If necessary, follow the steps under "Accessing the Printer System Board" starting on page 293. 2 Locate the option you want to remove. See page 296. 3 Loosen and remove the two screws over and under the slot. Gently pull the card out of the connector on the system board. Memory and Option Cards 4 Place the option card in its original packaging. If you did not save the packaging, wrap the card in paper and store it in a box. 5 If you need to install a replacement card or another option on the system board: - See "Option Cards" on page 308. - See "Printer Memory Option" on page 299. - See "Flash Memory Option" on page 304. 6 See "Closing the Printer System Board" on page 297 to reattach the shield and side door. Memory and Option Cards 319