Lexmark Optra T616 Technical Reference - Page 50

2-39 PCL Table 2-21: Page Control (Continued) Command / Parameters ESC&c#T 0 Horizontal Printing -1 Vertical Rotated Printing ESC&a#L # = Column Default = 0 ESC&a#M # = Column Default = Logical Page Width ESC9 l ESC& #E # = number of Lines Default = 3 (1/2 inch) l ESC& 1T l ESC& #F # = number of Lines Default = 60 or 64 (Country specific) l ESC& #G 0 Auto Select (uses the active bin) 1 Standard Bin 2 Bin 1 or Rear Bin 3 Bin 1 or Rear Bin 4 Bin 2 5 Bin 3 6 Bin 4 7 Bin 5 8 Bin 6 9 Bin 7 10 Bin 8 11 Bin 9 12 Bin 10 Function / Result Character Text Path Direction Vertically rotates text for use in vertical writing, such as printing Japanese text. Set Left Margin Sets left margin to left edge of the designated column. Note: The column width is defined by the space character of the active font and the Horizontal Motion Index (HMI). Set Right Margin Sets right margin to right edge of the designated column. Note: The column width is defined by the space character of the active font and the HMI. Clear Horizontal Margins Clears left and right margins. Set Top Margin Sets the number of lines between the top of the physical page and first line of print. Line height is determined by the current Vertical Motion Index (VMI) and/or line spacing value. Note: Setting a top margin of 0 results in the first line of text falling outside of the printable area. Job Separation This command is parsed and ignored. Set Text Length Sets the bottom margin length in lines, measured from the first line of the page. Text Length equals Logical Page Length -1 inch (-1/2 inch for top and -1/2 inch for bottom). Set Output Bin Sets the exit path to direct paper to one of the output bins.