Lexmark OptraImage 242 OptraImage Quick Reference Cards
Lexmark OptraImage 242 Manual
View all Lexmark OptraImage 242 manuals
Add to My Manuals
Save this manual to your list of manuals |
Lexmark OptraImage 242 manual content summary:
- Lexmark OptraImage 242 | OptraImage Quick Reference Cards - Page 1
want to cancel, then press Select. Scan a document 1 At your PC, type the IP address of the OptraImage in the URL field of your browser or use the Lexmark ScanBack Utility to define your scan profile. 2 Locate the network-attached OptraImage you want to use. 3 Place your originals in the automatic - Lexmark OptraImage 242 | OptraImage Quick Reference Cards - Page 2
OptraImage Quick Reference Collation/ Finishing Paper saver Duplex Content tteexxtt mixed Copy media Fax resolution Reduce Enlarge plain paper fine transparency syuper fine photo other ultra
OptraImage Quick Reference
©Copyright Lexmark International, Inc., 2000. All rights reserved.
P/N 16A0341
Printed in U.S.A. 5/00
EC 1A2101
Make a simple copy
1
Make sure the OptraImage control panel is in
copy mode and the
Ready
status message is
displayed. (If necessary, press
Stop/Clear
to
enter copy mode.)
2
Place your originals face up in the automatic
document feeder and make sure the top of
each page feeds in first.
3
Use the numeric keypad to enter the number
of copies you want to make.
4
Press
Go
/
Send
.
Tips
•
If you are using the flatbed of the scan unit,
watch the control panel for messages. If
prompted to
Place Next Or Stop
, place the
next page and then press
Go
/
Send
to
continue scanning. Press
Stop/Clear
when
all the pages have been scanned.
•
Press
Collation/Finishing
to collate your
copies.
•
Make sure the light is on next to the
Duplex
setting you want to use.
•
Press
Reduce
or
Enlarge
to scale the
original document. Make sure the size paper
you need is available.
•
Select a
Paper Saver
setting to copy two
pages (or four pages) of your original
document onto one sheet of paper.
Send a fax
1
Place your originals in the automatic feeder
or on the flatbed.
2
Use one of the following methods to fax:
a
Press
Fax/Scan Mode
repeatedly until
you see
Enter Phone #
in the display. Use
the numeric keypad to enter the fax
number of the person receiving the fax.
b
Press
Fax/Scan Mode
repeatedly until
you see
SCAN
→
FAX
in the control panel
display. Press
Menu>
until you see your
fax destination.
c
Press
#
and then enter the shortcut
number assigned to the fax number
3
Press
Go
/
Send
.
Cancel a fax
Press
Stop/Clear
to cancel sending a fax. When
you cancel a fax, the control panel resets to copy
mode. You must restart the fax sending process.
If your documents have already scanned into
memory, press
Menu >
until you see
Cancel fax
,
then press
Select
. Press
Menu >
again until you
see the fax you want to cancel, then press
Select
.
Scan a document
1
At your PC, type the IP address of the
OptraImage in the URL field of your browser
or use the Lexmark ScanBack Utility to define
your scan profile.
2
Locate the network-attached OptraImage you
want to use.
3
Place your originals in the automatic feeder
or on the flatbed.
4
Use one of the following methods to scan:
a
Press
Fax/Scan Mode
repeatedly until
you see
SCAN
→
PROFILE
.
Press
Menu >
repeatedly until you see your job
name.
b
Press
Fax/Scan Mode
repeatedly until
you see
SCAN
→
EMAIL
or
SCAN
→
FTP
.
Press
Menu >
repeatedly until you see your
e-mail or FTP destination.
c
Press
#
and then enter the shortcut
number assigned to the scan destination.
5
Press
Go
/
Send
.