Lexmark OptraImage SC 1275 Service Manual - Page 53

Attendance Message 58 Too Many Disks Installed Action You have installed more than one Hard Disk Option. The Hard Disk Option can be installed only in connector 3. Turn off the printer and remove the extra Hard Disk Option. 61 Defective Disk The printer detects a defective disk during power on, or during disk format and write operations. Press Go to clear the message. Hard disk operations are not allowed with a defective hard disk. Remove the defective hard disk and replace it with a new hard disk. 62 Disk Full There is not enough free space in the disk to hold the data that was sent. Press Go to clear the message and continue processing. Any data currently being written to the disk is lost. Or, to reset the printer: • Press to access the Busy menu. • Select Reset Printer. 63 Unformatted Disk The printer detected an unformatted hard disk when the printer was turned on. Disk operations are not allowed until the disk is formatted. • Format the hard disk with the Format Disk setting in the Tests Menu. • Send the data again. If the error condition remains, the disk is defective and must be replaced. Or, press Go to clear the message. The disk is ignored and normal operation continues. 2-18