Lexmark S515 User's Guide

Lexmark S515 Manual

Get Lexmark S515 PDF manuals and user guides View all Lexmark S515 manuals
Add to My Manuals
Save this manual to your list of manuals

Lexmark S515 manual content summary:

  • Lexmark S515 | User's Guide - Page 1
    S510 Series User's Guide October 2011 Machine type(s): 4448 Model(s): S510 Series: 201, 20E www.lexmark.com
  • Lexmark S515 | User's Guide - Page 2
    printer software 25 Minimum system requirements...25 Using the Windows printer software...25 Using the Macintosh printer software...27 Finding and installing optional software 28 Updating the printer software...29 Downloading PCL and PS drivers (Windows only 29 Reinstalling the printer software
  • Lexmark S515 | User's Guide - Page 3
    multiple pages on one sheet...54 Placing an overlay message on each page 54 Removing the background of a copy...54 Making a two-sided (duplex) copy...55 Canceling copy jobs...56 Scanning...57 Tips for scanning...57 Scanning to a local computer...57 Scanning to a network computer...58 Scanning to
  • Lexmark S515 | User's Guide - Page 4
    wireless setup...98 Installing the printer on an Ethernet network 108 Networking FAQ...109 Maintaining the printer 122 Maintaining ink cartridges...122 Cleaning the exterior of the printer...123 Cleaning the scanner glass...124 Moving the printer to another location 124 Troubleshooting 126
  • Lexmark S515 | User's Guide - Page 5
    Contents 5 Copy and scan troubleshooting...149 Fax troubleshooting...151 Network troubleshooting...156 Notices...167 Product information...167 Edition notice...167 Power consumption...171 Index...182
  • Lexmark S515 | User's Guide - Page 6
    , to a professional service person. CAUTION-SHOCK HAZARD: To avoid the risk of electric shock when cleaning the exterior of the printer, unplug the power cord from the wall outlet and disconnect all cables from the printer before proceeding. CAUTION-SHOCK HAZARD: Do not use the fax feature during
  • Lexmark S515 | User's Guide - Page 7
    ‑power standby mode after the printer has been idle for a set amount of time (the Sleep timeout). • Share your printer. Wireless/network printers allow you to share a single printer among multiple computers, thus conserving energy and other resources. Conserving paper • Print more than one page
  • Lexmark S515 | User's Guide - Page 8
    for? Initial setup instructions: • Connecting the printer • Installing the printer software Find it here Setup documentation The setup documentation came with the printer and is also available on the Lexmark Web site at http://support.lexmark.com. http://support.lexmark.com TM xxxxxxxxxxxxxx
  • Lexmark S515 | User's Guide - Page 9
    technical support: • Troubleshooting hints and tips • Frequently asked questions • Documentation • Driver downloads • Live chat support • E‑mail support Find it here User's Guide The User's Guide is available on the installation software CD. For updates, check our Web site at http://support.lexmark
  • Lexmark S515 | User's Guide - Page 10
    Statement of Limited Warranty included with this printer, or at http://support.lexmark.com. • In other countries or regions-See the printed warranty that came with your printer. Note: Your printer may not come with some of these programs or some of the functions of these programs, depending on the
  • Lexmark S515 | User's Guide - Page 11
    . This is recommended for scanning, copying, or faxing multiple-page documents. Note: Do not load postcards, photos, small items, or thin media (such as magazine clippings) into the ADF. Place these items on the scanner glass. 9 Printer control panel Operate the printer. 10 Paper exit tray Hold
  • Lexmark S515 | User's Guide - Page 12
    faxes. 19 Power supply with port Connect the printer to the power cord. 20 Ethernet port Connect your printer to a computer, a local network, an external DSL, or a cable modem. 21 Duplex unit • Print on both sides of a sheet of paper. • Clear paper jams. 22 Printhead access area Install
  • Lexmark S515 | User's Guide - Page 13
    and replacing supplies 13 Ordering and replacing supplies Ordering ink cartridges Lexmark S510 Series models (except Lexmark S519) Item Black cartridge Return Program cartridge1 150 Regular cartridge2 Not Available High‑yield black cartridge 150XL 150XLA Yellow color cartridge 150
  • Lexmark S515 | User's Guide - Page 14
    by non-Lexmark ink or ink cartridges. Replacing ink cartridges Make sure you have a new ink cartridge or cartridges before you begin. You must install new cartridges immediately after removing the old ones, or the ink remaining in the printhead nozzles may dry out. Removing ink cartridges 1 Turn on
  • Lexmark S515 | User's Guide - Page 15
    place. 3 1 2 Notes: • Insert the color cartridges first, and then the black cartridge. • Insert the new ink cartridges immediately after removing the protective cap to avoid exposing the ink to air. 3 Close the printer. Ordering paper and other supplies To order supplies or to locate a dealer
  • Lexmark S515 | User's Guide - Page 16
    type you want to recycle, and then select your country or region from the list. 3 Follow the instructions on the computer screen. Note: Printer supplies and hardware not listed in a Lexmark collection program may be recycled through your local recycling center. Contact your local recycling center to
  • Lexmark S515 | User's Guide - Page 17
    Using the printer control panel buttons and menus 17 Using the printer control panel buttons and menus Replacing the language sheet A language sheet is used to label buttons on the printer control panel. Language sheets can be replaced anytime, depending on which language you want to use. Some
  • Lexmark S515 | User's Guide - Page 18
    , and then fully extend the paper exit tray. Using the printer control panel Use 1 Power 2 Display Note: The display is turned off in Sleep mode. 3 Arrow buttons 4 Home To • Turn the printer on and off. • Switch to Sleep mode. Note: When the printer is on, press to switch to Sleep mode. Press and
  • Lexmark S515 | User's Guide - Page 19
    Using the printer control panel buttons and menus 19 Use 5 Keypad 6 Back 7 Select To In Copy mode or Photo mode: Enter the number of copies or prints you want to make. In Fax mode: • Enter fax numbers. • Operate an automated answering system. • Select letters when creating a Speed Dial list. •
  • Lexmark S515 | User's Guide - Page 20
    Using the printer control panel buttons and menus 20 13 Black 14 Start Switch to black‑and‑white mode. Start a job, depending on which mode is selected. 15 Cancel • Cancel a print, copy, scan, or fax job in progress. • Clear current settings or error messages, and return to previous settings.
  • Lexmark S515 | User's Guide - Page 21
    arrow button to scroll to Dim, and then press . Note: If you select 2‑Sided Copy, Standalone, then the printer prints on both sides of the paper (duplex) for copy and fax jobs, and for printing in Windows and Macintosh, depending on your printer model. Restoring factory default settings Resetting to
  • Lexmark S515 | User's Guide - Page 22
    fax. Scan a document or photo and send it through e‑mail. Note: Make sure the printer is connected to the network and the Internet through an Ethernet or wireless connection. Scan a document or photo and send it to your computer. Notes: Scan to Network • Make sure the printer driver is installed
  • Lexmark S515 | User's Guide - Page 23
    the shortcuts through your printer software. Launching the shortcuts page using the printer software Before you begin, make sure: • Your printer and computer are each connected to the network through an Ethernet or wireless connection. • Your printer is turned on. For Windows users 1 Click or Start
  • Lexmark S515 | User's Guide - Page 24
    Using shortcuts 24 Using shortcuts on the printer Make sure you have created a shortcut. From the printer control panel, navigate to: > Shortcuts > > select a shortcut >
  • Lexmark S515 | User's Guide - Page 25
    OS 2010* * The printer driver for this operating system is available only at http://support.lexmark.com. Using the Windows printer software Software installed during printer installation When you set up the printer using the installation software CD, all the necessary software was installed. You may
  • Lexmark S515 | User's Guide - Page 26
    Update To • Launch applications or programs. • Scan or e‑mail a photo or document. • Edit scanned documents. • Scan documents to PDF. • Adjust settings for the printer. • Order supplies. • Maintain ink cartridges. • Register the printer. • Contact technical support. • Access the User's Guide
  • Lexmark S515 | User's Guide - Page 27
    . • Select the paper type. • Add a watermark. • Enhance images. • Save settings. Note: Printing Preferences is installed automatically with the printer software. Note: Your printer may not come with some of these programs or some of the functions of these programs, depending on the features of the
  • Lexmark S515 | User's Guide - Page 28
    . Use Customer Support Lexmark Software Updates Lexmark Online Order Supplies Online Printer Registration Visit Lexmark SmartSolutions To Contact customer support. Download and install the latest printer software. Visit the Lexmark Web site. Order ink or supplies. Register your printer. • Visit
  • Lexmark S515 | User's Guide - Page 29
    1 From the Finder, navigate to: Applications > select your printer folder > Web Links > Lexmark Software Updates 2 From the Web site, select your printer and then download the driver. Downloading PCL and PS drivers (Windows only) Universal Print Drivers (PCL 5 emulation, PCL XL emulation, and PS
  • Lexmark S515 | User's Guide - Page 30
    the software installer package, and then follow the instructions on the computer screen. Using the Internet 1 Go to the Lexmark Web site at http://support.lexmark.com. 2 Navigate to: SUPPORT & DOWNLOADS > select your printer > select your operating system 3 Download the driver, and then install the
  • Lexmark S515 | User's Guide - Page 31
    guard. 3 Place the paper at the center of the paper support. Note: Use the indicators on the paper support when loading smaller‑size paper. 4 Adjust the paper guides so they rest against the edges of the paper. Note: Do not force paper into the printer. The paper should be flat against the paper
  • Lexmark S515 | User's Guide - Page 32
    letterhead paper with the printable side faceup and the top of the letterhead going into the printer first. 25 sheets of heavyweight matte paper • The printable side of the paper is faceup. • The paper guides rest against the edges of the paper. Note: Draft mode is available but is not recommended
  • Lexmark S515 | User's Guide - Page 33
    paper support. • You select the correct envelope size. Select the next biggest size if the exact envelope size is not listed. • You print the . • You load the photo paper in the center of the tray. • The paper guides rest against the edges of the cards. Notes: - For best results, allow photos to
  • Lexmark S515 | User's Guide - Page 34
    allow it to dry before stacking or storing to avoid ink smudging. Saving paper settings You can adjust the settings for your print and copy jobs to match the paper size and type you have loaded in the printer. 1 From the printer control panel, press . 2 Adjust the settings as needed: • If you
  • Lexmark S515 | User's Guide - Page 35
    the ADF You can load up to 35 sheets of an original document into the ADF for scanning, copying, and faxing. You can load A4‑, letter‑, or legal‑size paper into the ADF. 1 Adjust the paper guide on the ADF tray to the width of the original document. 2 Load the original document faceup
  • Lexmark S515 | User's Guide - Page 36
    For Windows users 1 With a document open, click File > Print. 2 Click Properties, Preferences, Options, or Setup. 3 Select the print quality, the number of copies to print, the type of paper to use, and how the pages should print. 4 Click OK to close any printer software dialogs. 5 Click OK or Print
  • Lexmark S515 | User's Guide - Page 37
    the number of copies that you want to print, and then select Collate. 5 Click OK to close any printer software dialogs. 6 Click OK or Print. For Macintosh users 1 With a document open, choose File > Page Setup. 2 From the Page Setup dialog, set the printer, paper size, and orientation. 3 Click OK
  • Lexmark S515 | User's Guide - Page 38
    side. 5 Adjust other settings as needed. 6 Click OK to close any printer software dialogs. 7 Click OK or Print. For Macintosh users 1 With a document open, choose File > Page Setup. 2 From the Page Setup dialog, set the printer, paper size, and orientation. 3 Click OK. 4 From the menu bar, choose
  • Lexmark S515 | User's Guide - Page 39
    Custom Sizes and set a custom size. 4 Navigate to: Paper type list > select Envelope 5 Navigate to: Layout tab > Page Orientation area > select an orientation 6 Click OK to close any printer software dialogs. 7 Click OK or Print. For Macintosh users 1 With a document open, choose File > Page Setup
  • Lexmark S515 | User's Guide - Page 40
    to: Paper type list > select the created custom type 6 Click OK to close any printer software dialogs. 7 Click OK or Print. For Macintosh users 1 With a document open, choose File > Page Setup. 2 From the "Format for" pop‑up menu, choose your printer. 3 From the Paper Size pop‑up menu, choose
  • Lexmark S515 | User's Guide - Page 41
    a name and adjust the settings as needed to create a custom size, and then click OK. 5 Click Close, and then click OK to close any printer software dialogs. 6 Click OK or Print. For Macintosh users 1 With a document open, choose File > Page Setup. 2 From the "Format for" pop‑up menu, choose your
  • Lexmark S515 | User's Guide - Page 42
    Warning-Potential Damage: Do not touch any cables, any network adapter, any connector, the memory device, or the printer in the areas shown while actively printing, reading, or writing from the memory device. A loss of data can occur. 2 Follow the instructions or select from available options on the
  • Lexmark S515 | User's Guide - Page 43
    PictBridge menu. b Press the arrow buttons to select the paper source, paper setup, photo size, number of photos per page and print quality. You can also enhance the quality of graphics. Press each time you make a selection. Note: The printer will use the default print settings unless you change the
  • Lexmark S515 | User's Guide - Page 44
    printer software dialogs. 6 Click OK or Print. To return to single-sided printing, repeat steps 1 and 2, and then navigate to: Layout tab > Print on Both Sides (Duplex) area > Print on one side only For Macintosh users 1 With a document open, choose File > Page Setup. 2 From the Page Setup dialog
  • Lexmark S515 | User's Guide - Page 45
    > Page Dry Time > 2 Press the up or down arrow button to scroll to the dry time setting you want, and then press . Note: The dry time varies depending on the print quality selected for the print job. Select Extended to extend the dry time for your prints. Using the printer software For Windows users
  • Lexmark S515 | User's Guide - Page 46
    & Fax > select your printer 2 Navigate to: Open Print Queue > Printer Setup > Driver tab or Printer Setup > Installable Options 3 From the Two‑Sided Printing Dry Time pop‑up menu, choose a dry time setting. Note: Under conditions of high humidity, or if the normal drying time does not allow the ink
  • Lexmark S515 | User's Guide - Page 47
    47 Creating a print queue For Windows users 1 From the Printer Tasks area, click Add a Printer. 2 Follow the instructions on the computer screen. For more information, see the documentation that came with your operating system. For Macintosh users 1 From the Print & Fax area, click +. 2 If
  • Lexmark S515 | User's Guide - Page 48
    before sending the print job. For Windows users 1 With a document open, click File > Print. 2 Click Properties, Preferences, Options, or Setup. 3 Navigate to: Quality tab > select a print quality > OK For Macintosh users 1 With a document open, choose File > Print. 2 From the printer pop‑up menu
  • Lexmark S515 | User's Guide - Page 49
    users 1 From the Apple menu, navigate to: System Preferences > Print & Fax > select your printer 2 Click Open Print Queue or Set Up Printers. The print queue dialog appears. 3 Resume the print job: • If you want to resume a particular print job, then choose the document name, and then click Resume
  • Lexmark S515 | User's Guide - Page 50
    network. It lets you print Web pages, photos from the photo album, or photos you recently captured using the camera of your mobile device, depending on its features. You can also customize print settings from your mobile device. Depending on your Lexmark printer model, you may need to download
  • Lexmark S515 | User's Guide - Page 51
    up or down arrow button to scroll to the option you want to set, and then press the left or right arrow button to scroll to the setting you want. If necessary, press to make a selection. 6 Select the copy mode: • Press to switch to color mode. • Press to switch to black‑and‑white mode.
  • Lexmark S515 | User's Guide - Page 52
    %, then press , and then press the left or right arrow button to select a custom percent value. Press to save the setting. • If you select Borderless, then the printer will reduce or enlarge the document or photo as necessary to print a borderless copy on the paper size that you selected. For best
  • Lexmark S515 | User's Guide - Page 53
    . • Pressing the right arrow button makes the copy darker. 5 Press . Collating copies using the printer control panel If you print multiple copies of a document, then you can choose to print each copy as a set (collated) or to print the copies as groups of pages (not collated). Collated Not
  • Lexmark S515 | User's Guide - Page 54
    scanner glass. 3 From the printer control panel, navigate to: > Copy > > Pages per Side 4 Press the left or right arrow button to select the paper orientation and the number of pages that you want to copy on a sheet of paper. You may print up to four page images on one sheet. 5 Press . Placing an
  • Lexmark S515 | User's Guide - Page 55
    page (top edge for portrait orientation and left edge for landscape orientation). 5 Press , and then follow the instructions on the display. Making a two‑sided (duplex) copy manually 1 Load paper. 2 Load the original document faceup into the ADF or facedown on the scanner glass. 3 From the printer
  • Lexmark S515 | User's Guide - Page 56
    color mode. • Press to switch to black‑and‑white mode. When you select color or black‑only printing, the light that corresponds to your choice comes on. 7 Press to print on one side of the paper. 8 Load the next page the paper with the top edge first to print the other side of the document. Make sure
  • Lexmark S515 | User's Guide - Page 57
    , or thin media (such as magazine clippings). Tips for scanning • Use the scanner glass when scanning two‑sided pages if your printer does not support duplex scanning or the ADF does not support the original document size. • When using the ADF, adjust the paper guide on the ADF to the width of the
  • Lexmark S515 | User's Guide - Page 58
    computer, see the Help for the printer software associated with your operating system. 4 Press the up or down arrow button to scroll to the scan option you want to set, and then press the left or right arrow button to scroll to the setting you want. Set the color, quality, original image size, and
  • Lexmark S515 | User's Guide - Page 59
    photos for editing For Windows users 1 Load photo or photos facedown on the scanner glass. 2 Click or Start. 3 Click All Programs or Programs, and then select the printer program folder from the list. 4 Navigate to: Printer Home > select your printer > Scan • If you want to scan a single photo, or
  • Lexmark S515 | User's Guide - Page 60
    Notes: • Use any application that supports your printer and lets you work with the OCR software, ABBYY FineReader. • If the OCR software is missing, then insert the installation software CD. Reinstall the printer software using the custom install option so you can manually select all of the packages
  • Lexmark S515 | User's Guide - Page 61
    Scanning 61 Scanning directly to e‑mail using the printer software Make sure you have set up your e‑mail settings before proceeding. For more information, see the section on e‑mailing in the User's Guide. For Windows users 1 Load an original document faceup into the ADF or facedown on the scanner
  • Lexmark S515 | User's Guide - Page 62
    , or to keep what is being scanned from being seen or used by others. You may be prompted to enter a PIN if the network computer you are scanning to requires one. To learn how PINs get assigned to network computers, see the Help for the printer software associated with your operating system.
  • Lexmark S515 | User's Guide - Page 63
    Scanning 63 Canceling scan jobs Press on the printer control panel, or click Cancel on the computer screen.
  • Lexmark S515 | User's Guide - Page 64
    Web browser. If you do not know the IP address of the printer, you can: • View the IP address on the printer control panel in the TCP/IP section under the Networks/Ports menu. • Print a network setup page or the menu settings pages and locate the IP address in the TCP/IP section. 2 Click Settings
  • Lexmark S515 | User's Guide - Page 65
    more information, click Help or ? to view the help information for the fax software. Sending e-mail ADF Scanner glass Use the ADF for multiple‑page documents. Note: The ADF is available only in select models. If you purchased a printer without an ADF, then load original documents or photos on the
  • Lexmark S515 | User's Guide - Page 66
    contacts from your address book instead of typing their e‑mail addresses repeatedly. • Use the scanner glass when scanning two‑sided pages if your printer does not support duplex scanning or the ADF does not support the original document size. • When using the ADF, adjust the paper guide on the ADF
  • Lexmark S515 | User's Guide - Page 67
    network. CAUTION-SHOCK HAZARD: Do not use the fax feature during a lightning storm. Do not set up this product or make any electrical or cabling connections, such as the power supply cord or telephone, during a lightning storm. Setting up the printer to fax Scenario 1: Standard telephone line Setup
  • Lexmark S515 | User's Guide - Page 68
    Faxing 68 Setup 2: Printer is sharing the line with an answering machine Connected to the same telephone wall jack EXT LINE PHONE LINE To connect: 1 Connect the cable from the wall jack to the port of the printer. 2 Remove the protective plug from the port of the printer, and then connect the
  • Lexmark S515 | User's Guide - Page 69
    sure that you set the correct ring pattern for the printer. Otherwise, the printer will not receive faxes even if you have set it to receive faxes automatically. Setup 3: Printer is sharing the line with a telephone subscribed to voice mail service EXT LINE 02 To connect: 1 Connect the cable from
  • Lexmark S515 | User's Guide - Page 70
    ring service, then make sure that you set the correct ring pattern for the printer. Otherwise, the printer will not receive faxes even if you have set it to receive faxes automatically. • If you have only one telephone number on your line, then you need to set the printer to receive faxes manually
  • Lexmark S515 | User's Guide - Page 71
    port. Scenario 3: VoIP telephone service EXT LINE To connect: 1 Connect one end of a telephone cable to the port of the printer. 2 Connect the other end of the cable to the port labeled Phone Line 1 or Phone Port on the VoIP adapter. The port labeled Phone Line 2 or Fax Port is not always active
  • Lexmark S515 | User's Guide - Page 72
    Faxing 72 Scenario 4: Digital telephone service through a cable provider Setup 1: Printer is connected directly to a cable modem Follow this setup if you normally connect your telephone to a cable modem. EXT LINE To connect: 1 Connect one end of a telephone cable to the port of the printer. 2
  • Lexmark S515 | User's Guide - Page 73
    Faxing 73 Setup 2: Printer is connected to a wall jack; cable modem is installed elsewhere in the house Follow this setup if your cable provider activated the wall jacks in your house so that you do not have to plug your devices into the cable modem. Your cable telephone service comes from the
  • Lexmark S515 | User's Guide - Page 74
    Faxing 74 Connecting the printer to a non‑RJ‑11 wall jack EXT LINE To connect: 1 Connect one end of a telephone cable to the port of the printer. 2 Connect the other end of the cable to the RJ‑11 adapter, and then connect the adapter to the wall jack. 3 If you want to
  • Lexmark S515 | User's Guide - Page 75
    Kingdom Warning-Potential Damage: If your country or region is on the list, then do not remove the wrap plug from the port of the printer. It is necessary for the proper functioning of the devices on the telephone line.
  • Lexmark S515 | User's Guide - Page 76
    Faxing 76 EXT LINE To connect: Connect the cable from the wall jack to the port of the printer. Connecting the printer to a wall jack in Germany The German wall jack has two kinds of ports. The N ports are for fax machines, modems, and answering machines. The F port is for telephones. NFN
  • Lexmark S515 | User's Guide - Page 77
    Faxing 77 Connect the printer to any of the N ports. EXT LINE NFN PHONE LINE To connect: 1 Connect one end of a telephone cable to the port of the printer your printer. Setting the fax header 1 From the printer control panel, navigate to: > Setup > > Fax Setup > > Dialing and Sending > > Fax
  • Lexmark S515 | User's Guide - Page 78
    > Setup > > Fax Setup > 2 Configure the fax settings using the selections in the menu: From here Address Book Reports You can Set up, view, or print the Address Book. • Print activity logs. Activity logs let you view the sent and received fax history of your printer. • Print confirmation pages or
  • Lexmark S515 | User's Guide - Page 79
    is the code you press to receive faxes manually. • Set the Caller ID pattern that you want. Some countries or regions have multiple patterns. • Set the printer to fit incoming faxes into a page when printing. • Set the fax footer. • Set the printer to print incoming faxes on both sides of the paper
  • Lexmark S515 | User's Guide - Page 80
    groups in the contact list. Creating a contact list using the printer control panel 1 From the printer control panel, navigate to: > Setup > > Fax Setup > > Address Book > 2 To add a fax number to your Address Book: a Press the arrow buttons to scroll to Add Entry, and then press . b Use the keypad
  • Lexmark S515 | User's Guide - Page 81
    , you need to import contacts from the phone books on your computer that are supported by the fax software. In addition to the software Address Book, you may also have phone books of the mail clients installed on your computer, such as Microsoft Outlook. 7 Click OK. For Macintosh users 1 From the
  • Lexmark S515 | User's Guide - Page 82
    the tray extension is flipped out. • Depending on your printer model, use the ADF when scanning two‑sided (duplex) pages. • To easily retrieve a document after copying or scanning, lift the ADF input tray. • When using the ADF, adjust the paper guide on the ADF to the width of the original document
  • Lexmark S515 | User's Guide - Page 83
    a cover page with the fax. 8 Click OK. For Macintosh users 1 With a document open, choose File > Print. 2 From the Printer pop‑up menu, select the fax version of your printer. Note: In order to see the fax options on the Print dialog, you must use the fax driver for your printer. If the fax version
  • Lexmark S515 | User's Guide - Page 84
    correct ring pattern for the printer. Otherwise, the printer will not receive faxes even if you have set it to receive faxes automatically. Receiving faxes manually 1 Turn off Auto Answer: From the printer control panel, navigate to: > Setup > > Fax Setup > > Ringing and Answering > > Auto Answer
  • Lexmark S515 | User's Guide - Page 85
    the fax through the fax software that was installed with the printer software. 1 Connect the printer to the telephone line. For more information, see "Setting up the printer to fax" on page 67. 2 Configure the fax settings using the fax software. To access the fax software: For Windows users
  • Lexmark S515 | User's Guide - Page 86
    If you are using the fax software to enter the dial prefix, fax. Distinctive Ring is also called Ident-a-Call, Smart Ring, Teen Ring, RingMaster, or IdentaRing. 1 From the printer control panel, navigate to: > Setup > > Fax Setup > > Ringing and Answering > > Ring Pattern > 2 Press the arrow buttons
  • Lexmark S515 | User's Guide - Page 87
    "Fax troubleshooting checklist" on page 151. How do I adjust the speaker volume on the printer? Listen to the dial tone to check if the telephone line is working and to check if the cables and devices are connected properly in your telephone network. If you set the printer to receive faxes manually
  • Lexmark S515 | User's Guide - Page 88
    , and which device you should use to answer the call. If you do not have distinctive ring service, then set the printer to receive faxes manually (Auto Answer Off). This setting lets you receive both voice calls and fax calls, but works best if you use voice mail more often. You need to turn off
  • Lexmark S515 | User's Guide - Page 89
    the cause of the error. 1 From the printer control panel, navigate to: > Setup > > Fax Setup > > Reports > > Transmission Log Printing > 2 Press the arrow buttons to select a report printing option: • If you want to print a report every time you send a fax, then select Print Log. • If you do
  • Lexmark S515 | User's Guide - Page 90
    you cannot retrieve a failed fax if the failure is due to power loss. In this case, the printer automatically prints an error report the next time it is turned on. For incoming faxes, the error report lets you know who sent the fax and how many pages were not printed. For outgoing faxes, it lets you
  • Lexmark S515 | User's Guide - Page 91
    91 Networking Installing the printer on a wireless network Wireless network compatibility Your printer contains an IEEE 802.11n wireless print server. Your printer is compatible with IEEE 802.11 b/g/n routers that are Wi-Fi certified. Supported network security options The printer supports three
  • Lexmark S515 | User's Guide - Page 92
    homes. Printing a network setup page A network setup page lists the configuration settings of the printer, including the IP address and MAC address of the printer. 1 Load plain paper. 2 From the printer control panel, navigate to: > Setup > > Network Setup > > Print Network Setup Page > Information
  • Lexmark S515 | User's Guide - Page 93
    Information you will need during advanced wireless setup The Wireless Setup Utility does not detect the wireless network SSID for you during advanced wireless setup. You must know the following information before configuring the wireless printer settings manually: Wireless Mode Check your wireless
  • Lexmark S515 | User's Guide - Page 94
    using is connected to the same wireless network where you want to set up the printer. For Windows users 1 Close all open software programs. 2 Insert the installation software CD. If the installation dialog does not appear after a minute, then launch the CD manually: a Click , or click Start and then
  • Lexmark S515 | User's Guide - Page 95
    the printer again, although you will need to run the setup software on each computer to install the driver. For Windows users 1 Close all open software programs. 2 Insert the installation software CD. If the installation dialog does not appear after a minute, then launch the CD manually: a Click
  • Lexmark S515 | User's Guide - Page 96
    is on and connected to your wireless network. Adding the printer to your wireless network 1 Set up your printer for wireless networking using the setup instructions provided. Stop when you are prompted to select a network. 2 If there is an association/registration button on the back of your box
  • Lexmark S515 | User's Guide - Page 97
    to complete installation. Assigning a static IP address The printer will be assigned an IP address automatically through DHCP on most wireless networks. 1 Complete the wireless setup, allowing the printer to receive a DHCP address from a DHCP server on the network. 2 Print a network setup page to
  • Lexmark S515 | User's Guide - Page 98
    This network setup is called infrastructure network. • If your computer has My WiFi or Wi‑Fi Direct, then you can create direct connections to your wireless printer. For more information, see the documentation that came with your computer. • The printer can communicate on only one wireless network
  • Lexmark S515 | User's Guide - Page 99
    any remaining windows. 5 Insert the installation software CD, and then follow the directions for wireless installation. Note: Do not connect the installation or network cables until instructed to do so by the setup software. 6 When the available networks are displayed, provide the network name and
  • Lexmark S515 | User's Guide - Page 100
    . Note: Do not connect the installation or network cables until instructed to do so by the setup software. 21 When the available networks are displayed, provide the network name and the security information you created. The installer will configure the printer for use with your computer. 22
  • Lexmark S515 | User's Guide - Page 101
    Setup (WPS), it is easy to add computers or printers to your wireless network because the SSID and WPA passphrase are automatically detected and configured for you. 1 Make sure your access point (wireless router) supports WPS. 2 Insert the installation software CD and follow the instructions
  • Lexmark S515 | User's Guide - Page 102
    that you have configured your printer for one type of connection and that the printer drivers are installed on the computer. See related topics on troubleshooting specific connection types if you encounter difficulties during configuration. Note: The printer supports one active local connection (USB
  • Lexmark S515 | User's Guide - Page 103
    wall jack. 2 Insert the installation software CD into the computer you want to use to configure the printer. 3 Follow the instructions on the computer screen for configuring a printer on an Ethernet network. 4 Select the Network printer. See "Selecting the printer" on page 103. Note: You will need
  • Lexmark S515 | User's Guide - Page 104
    applications. 4 Insert the installation software CD. If the installation dialog does not appear after a minute, then click the CD icon on the desktop. 5 Double‑click Lexmark Extras > Lexmark Setup Assistant. 6 Follow the instructions on the computer screen. 7 A second print queue will be created
  • Lexmark S515 | User's Guide - Page 105
    the computers to share the printer: a Make all computers printing to the printer accessible through Network Neighborhood by enabling File and Print Sharing. See the Windows documentation for instructions on enabling File and Print Sharing. b Install the printer software on all computers that will
  • Lexmark S515 | User's Guide - Page 106
    . • Sharing your printer with Windows users-Let Windows computers on the network use any printer connected to your Macintosh computer. 4 Follow the instructions on the computer screen. Note: Windows users should see the Windows documentation for information on adding a network printer connected to
  • Lexmark S515 | User's Guide - Page 107
    can require one or more certificates and an authentication server. If the network requires a certificate and you do not have it, fill out the certificate request form provided within the Wireless Setup Utility and follow your organization's procedures for requesting a certificate for network access
  • Lexmark S515 | User's Guide - Page 108
    cable when possible to avoid potential problems caused by a damaged cable. Installing the printer on an Ethernet network Before you install the printer on an Ethernet network, make sure that: • You have completed the initial setup of the printer. • Your network is set up and working properly. • Your
  • Lexmark S515 | User's Guide - Page 109
    Networking 109 For Windows users 1 Close all open software programs. 2 Insert the installation software CD. If the installation dialog does not appear after a minute, then launch the CD manually: a Click , or click Start and then click Run. b In the Start Search or Run box, type D:\setup.exe,
  • Lexmark S515 | User's Guide - Page 110
    ‑in Web server that can be accessed using a Web browser. • Check your computer to see if a program was installed with your wireless network adapter. Many network adapters provide a software application that allows you to view the wireless settings of your computer, including your SSID. If you are
  • Lexmark S515 | User's Guide - Page 111
    , and then press Enter. Notes: - To obtain the IP address of the access point, see the documentation that came with it, or contact your system support person. - If you are using a proxy server, then temporarily disable it to load the Web page correctly. 2 Enter the user name and password for the
  • Lexmark S515 | User's Guide - Page 112
    examples appear below. Note: The printers in the following diagrams represent printers with internal print servers built into them so that they can communicate over a network. Wireless network examples Scenario 1: Mixed wired and wireless connections on a network with Internet access • All computers
  • Lexmark S515 | User's Guide - Page 113
    access • A computer is directly connected to a printer without going through a wireless router. • This configuration is referred to as an ad hoc network. • The network has no connection to the Internet. Note: Most computers can connect to only one wireless network at a time. If you access the
  • Lexmark S515 | User's Guide - Page 114
    cable into the back of the printer. 3 Firmly plug the rectangular end of the USB cable into the USB port of the computer. 4 Follow the instructions on the computer screen. How are infrastructure and ad hoc networks different? Wireless networks can operate in one of two modes: infrastructure or ad
  • Lexmark S515 | User's Guide - Page 115
    your computer system tray, click the wireless icon that corresponds to the software managing your wireless network adapter. 2 Check the signal quality. Checking printer connectivity • From the printer, print a network setup page. In the Wireless section, look for Quality. • View the signal strength
  • Lexmark S515 | User's Guide - Page 116
    weak, too distorted, or blocked by an object, it cannot carry information between the access point and the printer. To determine if the printer is receiving a strong signal from the access point, print a network setup page. The Quality field indicates the relative strength of the wireless signal the
  • Lexmark S515 | User's Guide - Page 117
    . e Write down the SSID. Note: Make sure you copy it exactly, including any capital letters. 2 Obtain the SSID of the network that the printer is connected to: a From the printer, print a network setup page. b In the Wireless section, look for SSID. 3 Compare the SSID of the computer and SSID of the
  • Lexmark S515 | User's Guide - Page 118
    allow filtering of MAC addresses on networks. This allows a managed list of devices to access the network, identified by their MAC addresses, as well as prevent access from unwanted devices. If your network uses MAC address filtering, then be sure to add the MAC address of the printer to the list of
  • Lexmark S515 | User's Guide - Page 119
    . Other devices sometimes use a type of MAC address called Universally Administered Address (UAA). When installing the printer on a network, make sure you select the printer with the correct MAC address. The MAC address of the internal print server is a series of letters and numbers. MAC: XX XX
  • Lexmark S515 | User's Guide - Page 120
    the network. How do I locate IP addresses? For Windows users Services list. Locating the printer IP address • From the printer, print a network setup page. In the TCP/IP section, look for Address. • View the printer settings. From the printer control panel, navigate to: > Setup > > Network Setup
  • Lexmark S515 | User's Guide - Page 121
    communicate on the same wireless network. • You want the Wireless Setup Utility to automatically detect the network for you. • You want to connect your printer to the wireless network using Wi‑Fi Protected Setup (WPS). Use Advanced setup if: • The printer and the installing computer are not on the
  • Lexmark S515 | User's Guide - Page 122
    to: > Setup > >Maintenance > > Align Printer > An alignment page prints. Note: Do not remove the alignment page until printing is finished. If you aligned the cartridges to improve print quality, then print your document again. If print quality has not improved, then clean the printhead nozzles.
  • Lexmark S515 | User's Guide - Page 123
    replace the ink cartridges before you can clean the printhead nozzles. 1 Load paper. 2 From the printer control panel, navigate to: > Setup > > Maintenance > 3 Press the up or down arrow button to scroll to Clean Printhead or Deep Clean Printhead, and then press . A cleaning page prints. Cleaning
  • Lexmark S515 | User's Guide - Page 124
    Maintaining the printer 124 Cleaning the scanner glass Clean the scanner glass and other related parts when vertical streaks appear on your printed pages or when you see marks or smudges on such parts. 1 Dampen a clean, lint‑free cloth with water. 2 Gently wipe clean the scanner glass and other
  • Lexmark S515 | User's Guide - Page 125
    Maintaining the printer 125 • Keep the printer in an upright position to prevent the ink from leaking. • Avoid severe jarring movements.
  • Lexmark S515 | User's Guide - Page 126
    numbers for telephone technical support Setup troubleshooting • "Incorrect language appears on the display" on page 126 • "Software did not install" on page 127 • "Print job does not print or is missing pages" on page 127 • "Printer is printing blank pages" on page 129 • "Printer is busy or does
  • Lexmark S515 | User's Guide - Page 127
    the power cord into the power supply, and then plug the power cord into the wall outlet. 4 Turn on the printer. Print job does not print or is missing pages If the "Before you troubleshoot" checklist does not solve the problem, then try one or more of the following: MAKE SURE THE INK CARTRIDGES ARE
  • Lexmark S515 | User's Guide - Page 128
    mode. Press and hold for three seconds to turn off the printer. 2 Unplug the power cord from the wall outlet, and then pull out the power cord from the power supply. 3 After one minute, reconnect the power cord into the power supply, and then plug the power cord into the wall outlet. 4 Turn on the
  • Lexmark S515 | User's Guide - Page 129
    Troubleshooting 129 Printer is printing blank pages Blank pages may be caused by improperly installed ink cartridges. REINSTALL THE INK CARTRIDGES AND DEEP CLEAN AND ALIGN THE PRINTHEAD 1 Reinstall the ink cartridges, see "Replacing ink cartridges" on page 14 for more information. If the
  • Lexmark S515 | User's Guide - Page 130
    YOUR PRINTER Cannot print through USB If the "Before you troubleshoot" checklist does not solve the problem, then try one or have problems, then try another USB port on the computer. You may have connected to a defective port. MAKE SURE THE USB PORT IS ENABLED IN WINDOWS 1 Click PRINTER SOFTWARE
  • Lexmark S515 | User's Guide - Page 131
    Troubleshooting 131 Understanding printer messages Alignment Problem Try any of the following: • Check the ink cartridges. 1 Open the printer, and then remove and reinstall the ink cartridges. 2 Load a plain and unmarked A4‑ or letter‑size paper. The printer will read any markings on used paper,
  • Lexmark S515 | User's Guide - Page 132
    fax to enter the fax name and number. Touch Continue to clear the message. Ink Cartridge Error The printer is unable to authenticate one or more of the installed ink cartridges. Try one or more of the following: • Press to cancel the current job. • Use only genuine Lexmark ink cartridges. • Install
  • Lexmark S515 | User's Guide - Page 133
    : Depending on your printer settings, you may not be allowed to continue printing until you replace the specified cartridge. • See the User's Guide or visit the Lexmark Support Web site at http://support.lexmark.com for a list of supported ink cartridges. Load [Size] Paper Try one or more of the
  • Lexmark S515 | User's Guide - Page 134
    any obstructions to the printhead, and then close the printer. • Press to clear the message. Printhead Error Remove and reinsert the printhead Warning-Potential Damage: Do not touch the cartridge contacts with bare hands to avoid damage and print quality problems. 1 Open the printer, and then lift
  • Lexmark S515 | User's Guide - Page 135
    removing and reinserting the printhead does not resolve the error, then turn off the printer, and then turn it back on. If the problem persists, then contact customer support. Printhead Missing Try one or more of the following: • Install the printhead. 1 Open the printer, and then lift the carrier
  • Lexmark S515 | User's Guide - Page 136
    ink cartridges into the printhead. For more information, see "Replacing ink cartridges" in the User's Guide. 3 Close the printer. • Press to clear the message. • If your printer did not come with a printhead, then visit the Lexmark support Web site at http://support.lexmark.com, or contact customer
  • Lexmark S515 | User's Guide - Page 137
    sure to install the ink cartridges into the printhead. For more information, see "Replacing ink cartridges" in the User's Guide. 6 Close the printer. • Visit the Lexmark support Web site at http://support.lexmark.com or contact customer support for more information. Printhead Warning One or more
  • Lexmark S515 | User's Guide - Page 138
    the current print job. Standard Network Software Error Try one or more of the following: • Press to clear the message. • Turn the printer off and then back on to reset the printer. Unrecoverable Scan Error Try one or more of the following: • Restart your printer. • Update your printer firmware. USB
  • Lexmark S515 | User's Guide - Page 139
    Troubleshooting 139 • "Paper jam in the duplex unit" on page 142 • "Paper jam in the ADF (select models only)" on page 143 • "Paper or specialty media misfeeds" on page 146 Paper jam in the printer Note: The parts inside the printer • Make sure that the printhead is moved to the side and away from
  • Lexmark S515 | User's Guide - Page 140
    Troubleshooting 140 4 Reattach the jam clearance cover until it clicks into place. 1 2 5 Close the printer. 6 Touch OK or press , depending on your printer , depending on your printer model. Paper jam in the paper support Note: The parts inside the printer are sensitive. Avoid unnecessarily
  • Lexmark S515 | User's Guide - Page 141
    Troubleshooting 141 1 Remove the paper support. 2 Firmly grasp the paper, and then gently pull it out. Note: Make sure all paper fragments are removed.
  • Lexmark S515 | User's Guide - Page 142
    Troubleshooting 142 3 Reattach the paper support until it clicks into place. 4 Touch OK or press , depending on your printer model. Paper jam in the duplex unit Note: The parts inside the printer are sensitive. Avoid unnecessarily touching these parts while clearing jams. 1 Push down the duplex
  • Lexmark S515 | User's Guide - Page 143
    Troubleshooting 143 2 Firmly grasp the paper, and then gently pull it out. Note: Be careful not to tear the paper while removing it. 3 Reinsert the duplex unit until it clicks into place to clear the message. 4 If necessary, touch OK or press , depending on your printer model. Paper jam in the
  • Lexmark S515 | User's Guide - Page 144
    Troubleshooting 144 Check the ADF 1 Press the ADF button, and then open the ADF cover. Scenario 1 Scenario 2 2 2 1 1 2 Firmly grasp the paper on both sides, and then gently pull it out. Scenario 1 Scenario 2 Note: Make sure all paper fragments are removed.
  • Lexmark S515 | User's Guide - Page 145
    Troubleshooting 145 3 Close the ADF cover. 4 Touch OK or press , depending on your printer model. Check under the ADF tray 1 Remove the ADF tray. 2 Firmly grasp the paper on both sides, and then gently pull it out. Note: Make sure all paper fragments are removed.
  • Lexmark S515 | User's Guide - Page 146
    loading instructions for your paper or specialty media. REMOVE EACH PAGE AS IT IS PRINTED ADJUST THE PAPER GUIDES TO FIT THE LOADED PAPER Print troubleshooting • "Poor quality at the edges of the page" on page 146 • "Streaks or lines on printed image" on page 147 • "Print speed is slow" on page 148
  • Lexmark S515 | User's Guide - Page 147
    , choose Best or Photo. 10 Click Print. Streaks or lines on printed image If the "Before you troubleshoot" checklist does not solve the problem, then try one or more of the following: CHECK THE INK LEVELS Replace low or empty ink cartridges. SELECT A HIGHER PRINT QUALITY FROM THE PRINTER SOFTWARE
  • Lexmark S515 | User's Guide - Page 148
    MAKE SURE THE INK CARTRIDGES ARE PROPERLY INSTALLED ALIGN THE PRINTHEAD CLEAN OR DEEP CLEAN THE PRINTHEAD NOZZLES Note: If these solutions do not remove the streaks or lines on the printed image, then contact technical support. Print speed is slow If the "Before you troubleshoot" checklist does not
  • Lexmark S515 | User's Guide - Page 149
    image quality If the "Before you troubleshoot" checklist does not solve the problem, then try one or more of the following: CLEAN THE SCANNER GLASS ADJUST THE SCAN QUALITY FROM THE PRINTER SOFTWARE REVIEW THE TIPS FOR COPYING, SCANNING, AND IMPROVING PRINT QUALITY USE A CLEARER VERSION OF THE
  • Lexmark S515 | User's Guide - Page 150
    of the following: CLOSE OTHER SOFTWARE PROGRAMS THAT ARE NOT BEING USED RESTART THE COMPUTER Cannot scan to a computer over a network If the "Before you troubleshoot" checklist does not solve the problem, then try one or more of the following: MAKE SURE THE PRINTER AND THE DESTINATION COMPUTER ARE
  • Lexmark S515 | User's Guide - Page 151
    SURE THE PRINTER SOFTWARE IS INSTALLED ON THE DESTINATION COMPUTER Fax troubleshooting • "Fax troubleshooting checklist" on page 151 • "Cannot send faxes" on page 152 • "Cannot receive faxes" on page 153 • "Cannot run the fax software" on page 154 • "Fax error messages on the printer control panel
  • Lexmark S515 | User's Guide - Page 152
    Cannot send faxes If the "Fax troubleshooting checklist" does not solve the problem, then try one or more of the following: MAKE SURE THAT YOU HAVE REGISTERED YOUR USER INFORMATION IN THE PRINTER If you did not enter your user information during initial setup, then enter your fax name and fax number
  • Lexmark S515 | User's Guide - Page 153
    press . Cannot receive faxes If the "Fax troubleshooting checklist" does not solve the problem, then try one or more of the following: MAKE SURE THAT YOU HAVE CONFIGURED THE CORRECT SETTINGS FOR YOUR SETUP The fax settings depend on whether the printer is connected to its own fax line or shares
  • Lexmark S515 | User's Guide - Page 154
    are the digits 0-9 and the characters # and *. Cannot run the fax software The printer must be connected to a telephone, DSL, VoIP, or cable service before you can configure the fax settings in the fax software. MAKE SURE A FAX DRIVER IS INSTALLED The fax option is available for use only with the
  • Lexmark S515 | User's Guide - Page 155
    The receiving fax machine does not support the scan resolution of the document that you are sending. • Lower the fax quality. • Enable Auto Fax Conversion. The fax modem encountered critical Turn off the printer, turn it back on, and errors. then resend the fax. The fax modem of the printer may
  • Lexmark S515 | User's Guide - Page 156
    the help information for the fax software. Network troubleshooting • "Wireless troubleshooting checklist" on page 158 • "The Continue button is unavailable" on page 156 • "Cannot print and there is a firewall on the computer" on page 158 • "Communication with printer lost when connected to Virtual
  • Lexmark S515 | User's Guide - Page 157
    the wall outlet, and then pull out the power cord from the power supply. 3 After one minute, reconnect the power cord into the power supply, and then plug the power cord into the wall outlet. 4 Turn on the printer. RUN THE INSTALLER AGAIN 1 Close the installer. 2 Remove the CD, and then restart the
  • Lexmark S515 | User's Guide - Page 158
    are configured correctly, and the wireless network is working, but the printer will not print wirelessly, then a firewall could be the problem. If there is a firewall (other than the Windows firewall) on the computer, try one or more of the following: • Update the firewall using the most recent
  • Lexmark S515 | User's Guide - Page 159
    print over wireless network If you encountered problems while installing, or if your printer does not appear in the printers folder or as a printer option when sending a print job, then try uninstalling and reinstalling the software. Before you reinstall the software, check the troubleshooting
  • Lexmark S515 | User's Guide - Page 160
    are having trouble printing, then try placing the computer and printer no more than 100 feet apart. CHECK THE WIRELESS SIGNAL QUALITY Print a network setup page and check the signal quality. If the signal quality is listed as good or excellent, then another factor is causing the problem. CHECK YOUR
  • Lexmark S515 | User's Guide - Page 161
    . e Write down the SSID. Note: Make sure you copy it exactly, including any capital letters. 2 Obtain the SSID of the network that the printer is connected to: a From the printer, print a network setup page. b In the Wireless section, look for SSID. 3 Compare the SSID of the computer and SSID of the
  • Lexmark S515 | User's Guide - Page 162
    light is on. "Communication not available" message appears when printing wirelessly Try one or more of the following: MAKE SURE YOUR COMPUTER AND PRINTER HAVE VALID IP ADDRESSES FOR THE NETWORK If you are using a laptop and have power saving settings enabled, then you may see the "Communication
  • Lexmark S515 | User's Guide - Page 163
    from the Active Services list. The Router entry is typically the access point. Locating the printer IP address • From the printer, print a network setup page. In the TCP/IP section, look for Address. • View the printer settings. From the printer control panel, navigate to: > Setup > > Network Setup
  • Lexmark S515 | User's Guide - Page 164
    only the VPN and no other network at the same time. Disconnect from the VPN before installing the driver on the computer or before running the wireless setup on the computer. To check if the computer is currently connected to a VPN, open your VPN Client software and check your VPN connections. If
  • Lexmark S515 | User's Guide - Page 165
    originally configured by the manufacturer to use. Using the default SSID can cause problems when more than one network is operating in the same area with the same SSID. The printer or computer may attempt to attach to the wrong network, although it will appear to be trying to connect to the correct
  • Lexmark S515 | User's Guide - Page 166
    address to the printer: 1 Complete the wireless setup, allowing the printer to receive a DHCP address from a DHCP server on the network. 2 Print a network setup page to see what IP address is currently assigned to the printer. 3 Open a Web browser and then type the printer IP address in the address
  • Lexmark S515 | User's Guide - Page 167
    include technical inaccuracies or typographical errors. Changes are periodically made services, except those expressly designated by the manufacturer, are the user's responsibility. For Lexmark technical support, visit support.lexmark.com. For information on supplies and downloads, visit www.lexmark
  • Lexmark S515 | User's Guide - Page 168
    software and documentation developed exclusively at private expense. Trademarks Lexmark and Lexmark with diamond design are trademarks of Lexmark printer emulates the functions corresponding to the commands. All other trademarks are the property of their respective owners. AirPrint and the AirPrint
  • Lexmark S515 | User's Guide - Page 169
    of the installation software CD. Noise emission levels The following measurements were made in accordance with ISO 7779 and reported in conformance with ISO 9296. Note: Some modes may not apply to your product. 1-meter average sound pressure, dBA Printing 50 dBA Scanning 47 dBA Copying
  • Lexmark S515 | User's Guide - Page 170
    of our products. If you have further questions about recycling options, visit the Lexmark Web site at www.lexmark.com for your local sales office phone number. Product disposal Do not dispose of the printer or supplies in the same manner as normal household waste. Consult your local authorities for
  • Lexmark S515 | User's Guide - Page 171
    Agency (EPA) ENERGY STAR requirements as configured when shipped by Lexmark. Mercury statement This product contains mercury in the lamp (
  • Lexmark S515 | User's Guide - Page 172
    uses more energy. Off mode If this product has an off mode which still consumes a small amount of power, then to completely stop product power consumption, disconnect the power supply cord from the wall outlet. Total energy usage It is sometimes helpful to calculate the total product energy usage
  • Lexmark S515 | User's Guide - Page 173
    modifications to maintain uninterrupted service. If you experience trouble with this equipment, for repair or warranty information, contact Lexmark International, Inc. at www.lexmark.com or your Lexmark representative. If the equipment is causing harm to the telephone network, the telephone company
  • Lexmark S515 | User's Guide - Page 174
    problem. It is recommended that the customer install an appropriate AC surge arrestor in the AC outlet to which this device is connected. An appropriate AC surge arrestor is defined as one Zealand telephone network The following are special conditions for the Facsimile User Instructions. The grant
  • Lexmark S515 | User's Guide - Page 175
    to other Telecom customers. Some parameters required 30 minute period for any single manual call initiation, and • The equipment shall go on than 5 seconds between the end of one call attempt and the beginning of another. (nº de référence Lexmark : 14B5109 ou 80D1877) devant être installé sur toute ligne
  • Lexmark S515 | User's Guide - Page 176
    . To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing. The installer of this radio equipment must ensure that
  • Lexmark S515 | User's Guide - Page 177
    Pour empêcher toute interférence radio au service faisant l'objet d'une licence, cet appareil optimale. Si le matériel (ou son antenne d'émission) est installé à l'extérieur, il doit faire l'objet d'une licence. USA. The authorized representative is: Lexmark International Technology Hungária Kft.,
  • Lexmark S515 | User's Guide - Page 178
    MT NL NO PL PT RO SE SI SK TR UK Česky Společnost Lexmark International, Inc. tímto prohlašuje, že výrobek tento výrobek je ve adavky a dalšími příslušnými ustanoveními směrnice 1999/5/ES. Dansk Lexmark International, Inc. erklærer herved, at dette produkt overholder de væsentlige krav
  • Lexmark S515 | User's Guide - Page 179
    to that user. Limited warranty service The warranty period starts on the date of original purchase as shown on the purchase receipt and ends 12 months later provided that the warranty period for any supplies and for any maintenance items included with the printer shall end earlier if it, or
  • Lexmark S515 | User's Guide - Page 180
    with Lexmark user's guides, manuals, instructions or guidance -Unsuitable physical or operating environment -Maintenance by anyone other than Lexmark or a Lexmark authorized servicer -Operation of a product beyond the limit of its duty cycle -Use of printing media outside of Lexmark specifications
  • Lexmark S515 | User's Guide - Page 181
    will not apply to claims by you for bodily injury or damage to real property or tangible personal property for which Lexmark is legally liable. IN NO EVENT WILL LEXMARK BE LIABLE FOR ANY LOST PROFITS, LOST SAVINGS, INCIDENTAL DAMAGE, OR OTHER ECONOMIC OR CONSEQUENTIAL DAMAGES. This is true even if
  • Lexmark S515 | User's Guide - Page 182
    after installation (Windows) 97 checking ink levels 122 checking an unresponsive printer 126 checking the dial tone 87 checklist before you troubleshoot 126 fax troubleshooting 151 choosing a splitter, faxing 85 cleaning exterior of the printer 123 cleaning printhead nozzles 123 Close Printer 131
  • Lexmark S515 | User's Guide - Page 183
    of the printer cleaning 123 e‑mail function setting up 64 e‑mailing Address Book 64 canceling 66 configuring e‑mail settings 64 scanned documents 61 setting up e‑mail function 64 tips 66 F factory default settings restoring 21 failed faxes retrieving 90 fax confirmation page 89 printer memory 90
  • Lexmark S515 | User's Guide - Page 184
    Ink Cartridge Error 132 Ink Cartridge Missing 133 ink cartridges installing 14 ordering 13 removing 14 replacing 14 using genuine Lexmark 14 ink levels checking 122 Ink Low 133 inserting a flash drive 42 installation cable 113 installing network printer 120 installing optional software 28 installing
  • Lexmark S515 | User's Guide - Page 185
    Network [x] Software Error 134 network connection with USB 118 network indicator light 95 network overview 111 network printer installing 120 network security 111 network setup page printing 92 networking sharing the printer with a Macintosh computer 106 sharing the printer with a Windows computer
  • Lexmark S515 | User's Guide - Page 186
    134 Printhead Missing 135 Printhead Warning 137 Replace Ink Cartridge 137 Scanned Document Too Long 138 Scanner Disabled 138 Short Paper 138 Unrecoverable Scan Error 138 Unsupported Cartridge 133 USB Device Not Supported 138 USB Hub Not Supported 138 printer printing blank pages 129 printer problems
  • Lexmark S515 | User's Guide - Page 187
    network (Windows) 94 setup troubleshooting cannot print through USB 130 incorrect language appears on display 126 page does not print 127 printer does not respond 129 printer printing blank pages 129 printhead error 134 software did not install 127 shared printing 106 sharing printer in Windows
  • Lexmark S515 | User's Guide - Page 188
    copying, manual 55 two‑sided printing 44 two‑sided printing dry time setting 45 TX report, fax 89 U UK special wireless setup instructions 96 uninstalling printer software 29 Universal Print Driver downloading 29 Unrecoverable Scan Error 138 Unsupported Cartridge 133 updating printer software 29 USB
  • Lexmark S515 | User's Guide - Page 189
    up wireless printing 92 installing printer on (Macintosh) 94 installing printer on (Windows) 94 interference 116 resolving communication problems 164 security 91 security information 111 signal strength 115 SSID 110 troubleshooting 158 types of wireless networks 114 wireless network compatibility 91
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
S510 Series User's Guide
October 2011
www.lexmark.com
Machine type(s):
4448
Model(s):
S510 Series: 201, 20E