Lexmark T610n Administrator's Guide (1.4 MB) - Page 153
Removing an option card, If you need to install another option on the system board, refer
UPC - 734646281409
View all Lexmark T610n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 153 highlights
Removing an option card WARNING:Electronic components are easily damaged by static electricity. Touch something metal before you touch the card. If necessary, refer to the Setup Guide for instructions on accessing the printer system board. 1 Locate the option you want to remove. 2 Loosen and remove the two screws over and under the slot. Gently pull the card out of the connector on the system board. 3 Place the option card in its original packaging. If you did not save the packaging, wrap the card in paper and store it in a box. 4 If you need to install another option on the system board, refer to the Setup Guide. 5 Refer to the Setup Guide for instructions on closing the printer system board. Removing Options 153
153
Removing Options
Removing an option card
If necessary, refer to the
Setup Guide
for instructions on accessing the
printer system board.
W
ARNING
:
Electronic components are easily
damaged by static electricity. Touch something
metal before you touch the card.
1
Locate the option you want to remove.
2
Loosen and remove the two screws over and under the slot.
Gently pull the card out of the connector on the system board.
3
Place the option card in its original packaging. If you did not
save the packaging, wrap the card in paper and store it in a box.
4
If you need to install another option on the system board, refer
to the
Setup Guide
.
5
Refer to the
Setup Guide
for instructions on closing the printer
system board.