Lexmark T610n Technical Reference - Page 55
Table 2-24: Font Selection Continued, Select Font by Font ID
UPC - 734646281409
View all Lexmark T610n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
2-44 PCL Table 2-24: Font Selection (Continued) Command / Parameters Function / Result ESC(s#B (primary) Select Stroke Weight ESC)s#B (secondary) Selects a font with a particular thickness. -7 Ultra Thin -6 Extra Thin -5 Thin -4 Extra Light -3 Light -2 Demi Light -1 Semi Light 0 Medium (Default) 1 Semi Bold 2 Demi Bold 3 Bold 4 Extra Bold 5 Black 6 Extra Black 7 Ultra Black Note: This command will not alter the stroke weight of an available font. ESC(s#T (primary) Select Typeface ESC)s#T (secondary) Selects the best fit font design. # Typeface identifier (0 - 65535) Note: For a list of typeface numbers, see Table 2-13 on page 2-25 and Table 2-14 on page 2-27. To obtain the typeface values for downloaded fonts, print the font list from the printer operator panel or through MarkVision. Refer to your printer user documentation for more information. On the printout, the typeface number is the last number on the font selection command example line. The example line is below the name of the font. In the following example, the typeface number is underlined: RO Courier ((s0ph0s0b4099T ESC(#X (primary) Select Font by Font ID ESC)#X (secondary) Selects the font by the identification number. # = Font ID (0 - 32767) ESC(3@ (primary) Select Default Font ESC)3@ (secondary) Sets all font selection characteristics to the Default Font. ESC&p#X[data] Transparent Print Data # = number of data of bytes to print as text Prints the next number of bytes as text. ESC&d#D Select Underline Type (Enable) 0 Fixed 3 Floating Notes: • Fixed underline is drawn 5 pels below cursor position. • Floating underline position is determined by all the positions of the characters with descenders in the fonts that are to be underlined. • Underline thickness is 3/300 inch. ESC&d@ Underline - Disable