Lexmark T634 Setup Guide - Page 14
Set up the printer and print media handling options, always, provided with the printer. The 16
View all Lexmark T634 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
3 Plug one end of the jumper cord into the printer. Plug the other end of the jumper cord into the drawer. 4 Reconnect any disconnected cables. 5 If you intend to operate your 2000-sheet drawer at 100-127V power, instead of using the power cord provided with the printer you must use the 16 AWG power cord provided with the 2000-sheet drawer. Plug the 16 AWG power cord into the back of the drawer and then into a properly grounded electrical outlet. If you later decide to stop using the 2000-sheet drawer, you should then use the original power cord provided with the printer. The 16 AWG power cord should always remain with the 2000-sheet drawer. If you intend to operate your 2000-sheet drawer at 200-240V power, use the power cord provided with the printer. Plug the power cord into the back of the drawer and then into a properly grounded electrical outlet. Set up the printer and print media handling options 9