Lexmark T640DTN User's Guide - Page 54
Simplex single sided, Duplex, When loading more than one ream of paper
UPC - 734646725224
View all Lexmark T640DTN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Printing 3 Slightly bend the stack of print media as shown, and place it on the elevator tray with the preferred print side facing down. Align the stack of print media to the back of the drawer. Note: For duplex printing, letterhead or other preprinted paper must be loaded differently. Carefully align each stack as you load it to ensure a smooth edge where the stacks meet. Do not load print media above the load line. Note: When loading more than one ream of paper, we recommend you remove the top and bottom sheet. Simplex (single sided) 4 Close the loading door. Duplex Loading the 2000-sheet drawer 54
Loading the 2000-sheet drawer
54
Printing
3
Slightly bend the stack of print media as shown, and place it on the elevator tray with the preferred print side facing
down. Align the stack of print media to the back of the drawer.
Note:
For duplex printing, letterhead or other preprinted paper must be loaded differently.
Carefully align each stack as you load it to ensure a smooth edge where the stacks meet. Do not load print media
above the load line.
Note:
When loading more than one ream of paper, we recommend you remove the top and bottom sheet.
4
Close the loading door.
Simplex (single sided)
Duplex