Lexmark T652 User's Guide - Page 106
Bin Setup menu, Portrait Height, Feed Direction, Output Bin, Con Bins, Overflow Bin
View all Lexmark T652 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
Menu item Portrait Height 3-14 inches 76-360 mm Feed Direction Short Edge Long Edge Bin Setup menu Menu Item Output Bin Standard Bin Bin Configure Bins Mailbox Link Mail Overflow Link Optional Type Assignment Overflow Bin Standard Bin Bin Description Sets the portrait height Notes: • If the height exceeds the maximum, the printer uses the maximum height allowed. • 14 inches is the US factory default setting. Inches can be increased in 0.01-inch increments. • 356 mm is the international factory default setting. Millimeters can be increased in 1-mm increments. Specifies the feed direction if the paper can be loaded in either direction Notes: • Short Edge is the factory default setting. • Long Edge appears only if the longest edge is shorter than the maximum width supported in the tray. Description Specifies the default output bin Note: Standard Bin is the factory default setting. Specifies configuration options for output bins Notes: • Mailbox is the factory default setting. • Bins assigned the same name are automatically linked unless Link Optional is selected. • The Mailbox setting treats each bin as a separate mailbox. • The Link setting links together all available output bins. • The Link Optional setting links together all available output bins except the standard bin and only appears when at least two optional bins are installed. • The Type Assignment setting assigns each paper type to an output bin or linked bin set. Specifies an alternate output bin when a designated bin is full Note: Standard Bin is the factory default setting. Understanding printer menus 106