Lexmark W810n Complete Printer Reference (1.7 MB) - Page 119

Features The following table outlines the finisher's functions. Note: You cannot use both the staple and offset functions on the same print job. You can, however, use the hole punch function with any other finisher functions. Finishing capabilities for the 2500-sheet finisher Finisher feature Capability Hole punch 3 or 4 hole (static configuration)¹ Hole punch bins Both bins Staple low sensing The printer displays a Staples Low message when approximately 40 staples are left. Staple presence sensing Yes Staple capacity 5,000 staples Maximum staple packet size 50 sheets (20 lb plain letter size paper) Staple packet size sensing No Staple positions One (upper left corner for letter/A4 size paper)² Staple bins Bin 2 only Paper offset 40 mm (1.57 in.) Paper offset bins Bin 2 only ¹ You cannot configure the hole punch position for your job when you send it to print. Unique equipment must be installed for the 3 or 4 hole configuration. ² You cannot change the position of the staple. If necessary, reformat your print job from the software application, or rotate your print job using the printer driver to avoid stapled sets that are difficult to read. Output options 119