Lexmark X5320 User's Guide (Mac) - Page 150
Printer receives a blank fax, Fax Setup, Dialing and Sending, Dial Method, Dial Behind PBX
View all Lexmark X5320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 150 highlights
BE SURE THAT PRINTER IS DETECTING A DIAL TONE • See "Sending a fax while listening to a call (On Hook Dial)" on page 54. • Check the Dial Method setting. 1 Listen for a dial tone. If you hear a dial tone but the printer hangs up without dialing, this means it did not recognize the dial tone. 2 From the control panel, press Fax Mode. 3 Press . 4 Press or repeatedly until Fax Setup appears. 5 Press . 6 Press or repeatedly until Dialing and Sending appears. 7 Press . 8 Press or repeatedly until Dial Method appears. 9 Press . 10 Press or repeatedly until Dial Behind PBX appears. 11 Press to save this setting. Printer receives a blank fax These are possible causes and solutions. Try one or more of the following: CHECK ORIGINAL DOCUMENT Ask the sender to verify the original document was loaded correctly. CHECK INK Check the ink levels, and install a new print cartridge if necessary. CHECK CARTRIDGES 1 Remove the print cartridges. 2 Make sure the sticker and tape have been removed. 3 Reinsert the print cartridges. 1 2 Troubleshooting 150