Lexmark X543 Quick Reference - Page 1

Quick Reference Copying Making copies Making a quick copy 1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass. Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF. Place these items on the scanner glass. 2 If you are loading a document into the ADF, adjust the paper guides. 3 From the printer control panel, press for a black only copy or for a color copy. 4 If you placed the document on the scanner glass and have additional pages to copy, then place the next page on the scanner glass, and then press 1 on the numeric keypad. Otherwise, press 2 on the numeric keypad. Copying using the ADF 1 Load an original document faceup, short edge first into the ADF. Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF. Place these items on the scanner glass. 2 Adjust the paper guides. 3 From the printer control panel, press the Copy button, or use the keypad to enter the number of copies. 4 Change the copy settings as needed. 5 From the printer control panel, press for a color copy. for a black only copy or Copying using the scanner glass 1 Place an original document facedown on the scanner glass in the upper left corner. 2 From the printer control panel, press the Copy button, or use the keypad to enter the number of copies. 3 Change the copy settings as needed. 4 From the printer control panel, press for a black only copy or for a color copy. 5 Place the next document on the scanner glass, and then press 1 on the numeric keypad. Otherwise, press 2 on the numeric keypad. Canceling a copy job A copy job can be canceled when the document is in the ADF, on the scanner glass, or while the document is printing. To cancel a copy job: 1 From the printer control, panel press . Stopping appears, followed by Cancel Job. 2 Press to cancel the job. Note: If you want to continue to process the job, then press to continue copying. Canceling appears. The printer clears all pages in the ADF or printer and then cancels the job. Once the job is canceled, the copy screen appears. E-mailing Getting ready to e-mail Setting up the e-mail function For e-mail to operate, it must be turned on in the printer settings and have a valid IP address or gateway address. To set up the e-mail function: 1 Type the printer IP address into the address field of your Web browser. Note: If you do not know the IP address of the printer, then print a network setup page and locate the address in the TCP/IP section. 2 Click Settings. 3 Click E-mail/FTP Settings. 4 Click E-mail Server Setup. 1 5 Change the e-mail settings as needed. 6 Click Submit. Setting up the address book 1 Type the printer IP address into the address field of your Web browser. Note: If you do not know the IP address of the printer, then print a network setup page and locate the address in the TCP/IP section. 2 Click Settings. 3 Click E-mail/FTP Settings. 4 Click Manage E-mail Shortcuts. 5 Change the e-mail settings as needed. 6 Click Submit. Creating an e-mail shortcut using the Embedded Web Server 1 Type the printer IP address into the address field of your Web browser. Note: If you do not know the IP address of the printer, then print a network setup page and locate the address in the TCP/IP section. 2 Click Settings. 3 Click Manage Destinations. Note: You may be asked to enter a password. If you do not have an ID and password, get one from your system support person. 4 Click E-mail Destination Setup. 5 Type a unique name for the recipient, and then enter the e-mail address. Note: If you are entering multiple addresses, separate each address with a comma (,). 6 Select the scan settings (Format, Content, Color, and Resolution). 7 Enter a shortcut number, and then click Add. If you enter a number that is already in use, you are prompted to select another number.