Lexmark X5450 User's Guide - Page 160
Scanner unit does not close, Poor copy quality, Copy Mode, Lighter/Darker, Start Color, Start Black
View all Lexmark X5450 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 160 highlights
Scanner unit does not close 1 Lift the scanner unit. 2 Remove any obstruction keeping the scanner unit open. 3 Lower the scanner unit. Poor copy quality • Blank pages • Checkerboard pattern • Distorted graphics or pictures • Missing characters • Faded print • Dark print • Skewed lines • Smudges • Streaks • Unexpected characters • White lines in print These are possible solutions. Try one or more of the following: CHECK MESSAGES If an error message is displayed, see "Error messages on the computer screen" on page 177. CHECK INK Check the ink levels, and install a new print cartridge if necessary. CLEAN THE SCANNER GLASS If the scanner glass is dirty, gently wipe it with a clean, lint-free cloth dampened with water. REVIEW STEPS TO IMPROVE PRINT QUALITY See "Improving print quality" on page 133. ADJUST THE BRIGHTNESS OF THE COPY 1 Load the document facedown on the scanner glass. 2 From the control panel, press Copy Mode. 3 Press Lighter/Darker. 4 Press or repeatedly to lighten or darken the copy. 5 Press Start Color or Start Black. CHECK QUALITY OF ORIGINAL DOCUMENT If the quality of the original document is not satisfactory, try using a clearer version of the document or image. Troubleshooting 160