Lexmark X651DE IPDS Emulation User's Guide - Page 54
Lexmark W850, X860de, X862de and X864de Optional Standard Finisher
UPC - 734646093729
View all Lexmark X651DE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
5.2.1.2 Lexmark W850, X860de, X862de and X864de Optional Standard Finisher The optional Standard Finisher supports Corner staple and Dual staple (IPDS Edge stitch). The printer automatically rotates the text 180 degrees for short-edge fed paper and 90 degrees for long-edge fed paper. If necessary, reformat your job on the host with a different text orientation to avoid stapled sets that are hard to read. Refer to your printer or finisher documentation to determine the finishing support and staple location for various paper sizes. Finishing functions may not be applied to all paper sizes. See Lexmark X860de, X862de and X864de MFPs Optional Advanced Finisher Functions (on page 56) for information on additional functions supported. The Printer device type must always be *IPDS. How to specify Printer File parameters is shown below. 5.2.1.2.1 Corner Staple Parameters in the printer file Corner staple .........*TOPLEFT, *BOTLEFT, *TOPRIGHT or *DEVD Drawings of staple placement *TOPLEFT *DEVD TEXT Text Text text text Text is shown with 0 degree rotation specified in IPDS job *BOTLEFT *TOPRIGHT *TOPLEFT *DEVD 54 TEXT Text, text. Text xxxxx Long-edge fed paper, leading edge Text is shown with 0 degree rotation specified in IPDS job Short-edge fed paper, leading edge