Lexmark X6675 User's Guide - Page 152

Failed to Connect, Fax Setup, Dialing and Sending, Dial Method

Page 152 highlights

MAKE SURE THE PRINTER DETECTS DIAL TONE • See the instructions for sending a fax while listening to a call (on hook dial). • Check the Dial Method setting: 1 Listen for a dial tone. If you hear a dial tone but the printer hangs up without dialing, this means it did not recognize the dial tone. 2 From the printer control panel, press . 3 Press the arrow buttons until Fax Setup appears, and then press . 4 Press the arrow buttons until Dialing and Sending appears, and then press . 5 Press the arrow buttons until Dial Method appears, and then press . 6 Press the arrow buttons until the dialing method that you want appears, and then press to save the setting. Failed to Connect These are possible solutions. Try one or more of the following: USE PHONE LINE CHECKLIST • Resend the fax. There may have been a problem with the quality of the telephone line connection. • Place a test call to the telephone number to which you want to send a fax to make sure that it is working correctly. • If the telephone line is being used by another device, wait until the other device is finished before sending the fax. MAKE SURE THE PRINTER DETECTS DIAL TONE • See the instructions for sending a fax while listening to a call (on hook dial). • Check the Dial Method setting: 1 Listen for a dial tone. If you hear a dial tone but the printer hangs up without dialing, this means it did not recognize the dial tone. 2 From the printer control panel, press . 3 Press the arrow buttons until Fax Setup appears, and then press . 4 Press the arrow buttons until Dialing and Sending appears, and then press . 5 Press the arrow buttons until Dial Method appears, and then press . 6 Press the arrow buttons until the dialing method that you want appears, and then press to save the setting. Troubleshooting 152

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173

M
AKE
SURE
THE
PRINTER
DETECTS
DIAL
TONE
See the instructions for sending a fax while listening to a call (on hook dial).
Check the Dial Method setting:
1
Listen for a dial tone. If you hear a dial tone but the printer hangs up without dialing, this means it did not
recognize the dial tone.
2
From the printer control panel, press
.
3
Press the arrow buttons until
Fax Setup
appears, and then press
.
4
Press the arrow buttons until
Dialing and Sending
appears, and then press
.
5
Press the arrow buttons until
Dial Method
appears, and then press
.
6
Press the arrow buttons until the dialing method that you want appears, and then press
to save the
setting.
Failed to Connect
These are possible solutions. Try one or more of the following:
U
SE
PHONE
LINE
CHECKLIST
Resend the fax. There may have been a problem with the quality of the telephone line connection.
Place a test call to the telephone number to which you want to send a fax to make sure that it is working
correctly.
If the telephone line is being used by another device, wait until the other device is finished before sending the
fax.
M
AKE
SURE
THE
PRINTER
DETECTS
DIAL
TONE
See the instructions for sending a fax while listening to a call (on hook dial).
Check the Dial Method setting:
1
Listen for a dial tone. If you hear a dial tone but the printer hangs up without dialing, this means it did not
recognize the dial tone.
2
From the printer control panel, press
.
3
Press the arrow buttons until
Fax Setup
appears, and then press
.
4
Press the arrow buttons until
Dialing and Sending
appears, and then press
.
5
Press the arrow buttons until
Dial Method
appears, and then press
.
6
Press the arrow buttons until the dialing method that you want appears, and then press
to save the
setting.
Troubleshooting
152