Lexmark X782e SCS/TNe Emulation User’s Guide - Page 112
If Option 177 = 0, 1 or 2, Normal, No Codes
View all Lexmark X782e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
Option Value Normal' No Codes' Normal'' IDB Value 4 5 6 Comments Standard handling of control codes after Power On. If the +M command is used, CR, LF, NL and FF codes from the host are suppressed and the auto-NL function is disabled. CR, LF, NL and FF codes from the host are suppressed. It can be enabled with the -M command. The auto-NL is still enabled. Standard handling of control codes after Power On. If the +M command is used, CR, LF, NL and FF codes from the host are suppressed. The auto-NL function is still enabled. NOTE: = &% is factory default. + M [m]: If Option 177 = 0, 1 or 2: After this command the auto-NL function is disabled. All host generated control codes are still sent to the printer. Operations - TN3270E SETUP: MISC SETTINGS > Format Ctrl Sup (IDB Option 177) 112