Lexmark X832e Print Drivers for UNIX and LINUX Systems - Page 10

Troubleshooting - downloads

Get Lexmark X832e PDF manuals and user guides View all Lexmark X832e manuals
Add to My Manuals
Save this manual to your list of manuals

Page 10 highlights

Troubleshooting Occasionally, a problem may arise that is minor in nature, and a service call may not be necessary. Use this troubleshooting guide for a possible solution. If the unit continues to operate improperly, call an authorized service depot or Danby's Toll Free Number 1-800-263-2629 for assistance. PROBLEM 1) No power. 2) Cabinet temperature too high. POSSIBLE CAUSE • A fuse in your home may be blown or a circuit breaker tripped • Power surge • Plug is not fully insterted into wall outlet. SOLUTION • Replace fuse or reset circuit breaker. • Unplug the wine cooler, wait a few seconds and plug back in. • Make sure the 3-prong plug is fully inserted into outlet. • Temperature Setting. • Door not shut properly or opened excessively. • Verify the temperature control setting; adjust if necessary. • Ensure door is fully closed and the gasket is sealing against the cabinets. Open door only as needed and for short periods of time. • Exhaust vent is obstructed. • Verify that nothing is blocking front-mounted exhaust vent. • Recently added large quantity of • Limit quantity of warm bottles warm bottles to cabinet. introducted at the same time. Stagger the load introduction if possible. 3) Condensation on the cabinet and/or doors. • High humidity conditions in the home. • Ensure door is fully closed and gasket is sealing against the cabinet. Open the door only as needed and for short periods of time. 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
Troubleshooting
Occasionally, a problem may arise that is minor in nature, and a service call may not be necessary. Use this trou-
bleshooting guide for a possible solution. If the unit continues to operate improperly, call an authorized service depot or
Danby’s Toll Free Number
1-800-263-2629
for assistance.
PROBLEM
POSSIBLE CAUSE
SOLUTION
1) No power.
• A fuse in your home may be
blown or a circuit breaker
tripped
• Power surge
• Plug is not fully insterted into
wall outlet.
• Replace fuse or reset circuit
breaker.
• Unplug the wine cooler, wait a
few seconds and plug back in.
• Make sure the 3-prong plug is
fully inserted into outlet.
2) Cabinet temperature too
high.
• Temperature Setting.
• Door not shut properly or
opened excessively.
• Exhaust vent is obstructed.
• Recently added large quantity of
warm bottles to cabinet.
• Verify the temperature control
setting; adjust if necessary.
• Ensure door is fully closed and
the gasket is sealing against the
cabinets. Open door only as
needed and for short periods of
time.
• Verify that nothing is blocking
front-mounted exhaust vent.
• Limit quantity of warm bottles
introducted at the same time.
Stagger the load introduction if
possible.
3) Condensation on the
cabinet and/or doors.
• High humidity conditions in the
home.
• Ensure door is fully closed and
gasket is sealing against the
cabinet. Open the door only as
needed and for short periods of
time.
9