Lexmark Z12 Color Jetprinter User's Guide for Windows 2000 (2.3 MB) - Page 37
Start, Settings, Printers, Lexmark Z12 Series ColorFine, Properties, Ports, USB or LPTn
View all Lexmark Z12 Color Jetprinter manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Steps to basic printing Maintaining your printer Troubleshooting Appendix Index Troubleshooting • Your printer software is set to an LPTn port if you are using a parallel cable or to a USB port if you are using a USB cable. To check your port settings in Windows 2000: 1 Click Start. 2 Select Settings. 3 Click Printers. 4 Right-click the Lexmark Z12 Series ColorFine™ icon. 5 Click Properties. 6 Click the Ports tab. 7 Select USB or LPTn to change your port. 8 Click OK. If you have a switch box or other device (such as a scanner or fax) connected to the computer's parallel port, make sure it supports bidirectional communication. You may need to disconnect your printer from the switch box or other device and connect it directly to your computer. If you are using a USB hub with your printer, remove the hub and connect the USB cable directly to the computer. 37