Lexmark Z1520 User's Guide

Lexmark Z1520 Manual

Get Lexmark Z1520 PDF manuals and user guides View all Lexmark Z1520 manuals
Add to My Manuals
Save this manual to your list of manuals

Lexmark Z1520 manual content summary:

  • Lexmark Z1520 | User's Guide - Page 1
    1500 Series User's Guide June 2007 www.lexmark.com
  • Lexmark Z1520 | User's Guide - Page 2
    in the user documentation, to a professional service person. This product is designed, tested, and approved to meet strict global safety standards with the use of specific Lexmark components. The safety features of some parts may not always be obvious. Lexmark is not responsible for the use of
  • Lexmark Z1520 | User's Guide - Page 3
    the printer software 17 Security Information...19 Networking...20 General networking...20 Networking overview ...20 Common home network configurations ...20 What information do I need and where do I find it 22 Finding the MAC address ...22 Printing a network setup page ...23 Wireless networking
  • Lexmark Z1520 | User's Guide - Page 4
    the printer to factory default settings 40 Printing on both sides of the paper (duplexing 40 Understanding the two-sided printing (duplexing) function 40 Printing on both sides of the paper (duplexing) automatically 41 Printing on both sides of the paper (duplexing) manually 41 Working
  • Lexmark Z1520 | User's Guide - Page 5
    nozzles and contacts 59 Cleaning the exterior of the printer...60 Preserving the print cartridges...61 Ordering supplies...61 Ordering print cartridges...61 Ordering paper and other supplies ...61 Troubleshooting...63 Setup Troubleshooting...63 Power button is not lit ...63 Power light is blinking
  • Lexmark Z1520 | User's Guide - Page 6
    79 Ping the access point ...79 Ping the printer ...80 Run the Wireless Setup Utility (Windows users only 80 Changing wireless settings after installation (Windows users only 81 Check printer ports (Windows users only 81 Print troubleshooting...81 Partial document or photo prints...81 Improving
  • Lexmark Z1520 | User's Guide - Page 7
    misfeeds troubleshooting 97 Paper jam in the printer ...97 Paper jam in the paper support ...97 wireless network 103 Error messages on the computer screen 104 Clearing error messages ...104 Left/Right Cartridge Missing ...104 Communication not available ...104 General Printing Problem ...105 Ink
  • Lexmark Z1520 | User's Guide - Page 8
    Unsupported file types found on memory card 106 Paper Jam ...106 Multiple All-In-Ones found ...106 Notices...107 Product information...107 Edition notice...107 European EC directives conformity statement for radio products 109 Power consumption...112 Networking glossary 117 Index...119 8
  • Lexmark Z1520 | User's Guide - Page 9
    The User's Guide gives you instructions for setting up You can find this document in the printer box or on the hardware and software (on Windows operating Lexmark Web site at www.lexmark.com. systems) and some basic instructions for using the printer. Note: If your printer supports Macintosh
  • Lexmark Z1520 | User's Guide - Page 10
    printer) follow these instructions: • Maintaining the printer 1 Insert the CD. • Connecting the printer to a network (if supported by The installation screen appears. your printer) Note: If necessary, click ŒAll Programs Œ • Troubleshooting problems with printing, copying, Run. In Windows
  • Lexmark Z1520 | User's Guide - Page 11
    notice. For the most recent phone numbers available, see the printed warranty statement that shipped with your printer. E-mail support For e-mail support, visit our Web site: www.lexmark.com. E-mail support varies by country or region, and may not be available in some instances. 1 Click CUSTOMER
  • Lexmark Z1520 | User's Guide - Page 12
    . For complete descriptions: • Windows users-See the User's Guide. • Macintosh users-If your product supports Macintosh, see the Mac Help installed with the printer software. Wireless network compatibility Your printer contains an IEEE 802.11g wireless print server. Your printer is compatible with
  • Lexmark Z1520 | User's Guide - Page 13
    user information (Mac Help or User's Guide: Comprehensive Version) can be found on the installation software CD 5 Quick Setup sheet Initial setup instructions 6 Color print cartridge Cartridge to be installed in the right cartridge carrier 7 Black print cartridge Cartridge to be installed in the
  • Lexmark Z1520 | User's Guide - Page 14
    "Power light and duplex light are blinking alternately" on page 64. 4 PictBridge port Connect a PictBridge-enabled digital camera or a flash drive to the printer. 5 Card reader light Check card reader status. The light blinks to indicate a memory card is being accessed. 6 Memory card slots Insert
  • Lexmark Z1520 | User's Guide - Page 15
    indicates that the printer is connected to a wireless network. 8 Paper exit tray Stack paper as it exits. 9 Access cover • Install or change the print cartridges. • Clear paper jams. 10 Paper feed guard Prevent items from falling into the paper slot. 11 Paper guides Keep paper straight when
  • Lexmark Z1520 | User's Guide - Page 16
    in or removing a USB cable or installation cable. 4 Internal wireless print server Connect to a wireless network. Installing the printer software Using the installation software CD (Windows users only) Using the CD that came with the printer: 1 Start Windows. 2 When the desktop appears, insert the
  • Lexmark Z1520 | User's Guide - Page 17
    .lexmark.com. 2 From the home page, navigate through the menu selection, and then click Drivers & Downloads. 3 Choose the printer and the printer driver for your operating system. 4 Follow the instructions on the computer screen to download the driver and install the printer software. Understanding
  • Lexmark Z1520 | User's Guide - Page 18
    tabs for more information, including how to change printer settings and troubleshooting. The Solution Center is a complete guide to such printing features as printing photos, troubleshooting printing problems, and installing print cartridges and performing maintenance tasks. To open the Solution
  • Lexmark Z1520 | User's Guide - Page 19
    cartridges to fix blurry edges. • View ink levels. • Troubleshoot other ink problems. Security Information Third-party applications, including anti-virus, security, and firewall programs may alert you about the printer software being installed. For your printer to work properly, allow the printer
  • Lexmark Z1520 | User's Guide - Page 20
    the following diagrams represent Lexmark printers with Lexmark internal print servers built in or installed in them so that they can communicate over a network. Lexmark internal print servers are devices made by Lexmark to enable Lexmark printers to be connected to wired or wireless networks. Wired
  • Lexmark Z1520 | User's Guide - Page 21
    to the Internet through a DSL or a cable modem. Internet Scenario 2: Computer, laptop, and printer connected wirelessly with Internet • A computer, a laptop, and a printer are connected wirelessly to a wireless router. • The network is connected to the Internet through a DSL or a cable modem
  • Lexmark Z1520 | User's Guide - Page 22
    a unique hardware identification number to distinguish it from other devices on the network. This is called the Media Access Control (MAC) address. If your printer has a factory installed internal wireless print server, the MAC address is a series of letters and numbers located on the back of your
  • Lexmark Z1520 | User's Guide - Page 23
    settings, including the IP address and MAC address of the printer. 1 Make sure the printer is turned on. 2 Press . The light pulses. 3 Press and hold . 4 While holding , press . 5 When the light becomes steady, release . The network setup page prints. Wireless networking Finding IP addresses An IP
  • Lexmark Z1520 | User's Guide - Page 24
    in the Configuration Utility. Contact your system support person for more information. Finding the signal strength Wireless devices have built-in antennas that transmit and receive radio signals. The signal strength listed on the printer network setup page indicates how strongly a transmitted signal
  • Lexmark Z1520 | User's Guide - Page 25
    network security • Increased reliability • Faster performance • Easier setup Advanced wireless setup Creating an ad hoc wireless network using Windows The recommended way to set up your wireless network is to use a wireless access point (wireless router). A network set up this way is called an
  • Lexmark Z1520 | User's Guide - Page 26
    instructions in the "Set up a wireless ad hoc network" wizard. As part of the setup: a Create a network name or SSID for the network between the computer and your printer and any remaining windows. 6 Insert the printer CD into the computer and follow the direction for wireless installation. 7 When
  • Lexmark Z1520 | User's Guide - Page 27
    screen. 24 Store your network name and security code in a safe place for future reference. Adding a printer to an existing ad hoc wireless network using Windows 1 Click Programs or All Programs ΠLexmark 1500 Series. 2 Click Wireless Setup. 3 Follow the instructions on the computer screen. 27
  • Lexmark Z1520 | User's Guide - Page 28
    instructions that came with it. • You do not force paper into the printer. 2 Before loading paper the first time, slide the paper guides out toward the edges of the paper support to avoid ink smudging. 3 Load the paper vertically in the center of the paper support, and adjust the paper guides to rest
  • Lexmark Z1520 | User's Guide - Page 29
    ink smudging. Loading labels You can load up to 25 sheets of labels at a time. 1 Load labels with the print side facing you and the top of the sheet fed into the printer The labels are loaded in the center of the paper support. • The paper guides rest against the edges of the labels. Note: Labels
  • Lexmark Z1520 | User's Guide - Page 30
    it to dry to avoid ink smudging. Loading transparencies You printer. 2 Make sure: • The transparencies are loaded in the center of the paper support. • The paper guides instructions that came with the iron-on transfers. • The transfers are loaded in the center of the paper support. • The paper guides
  • Lexmark Z1520 | User's Guide - Page 31
    . 3 Place the required stack of banner paper on a flat surface behind the printer. 4 Feed the leading edge of the banner paper into the printer first. W I F I PRINTING 5 Make sure: • The paper is loaded in the center of the paper support. • The paper guides rest against the edges of the paper. 31
  • Lexmark Z1520 | User's Guide - Page 32
    You can use the Toolbar to create a printer-friendly version of any Web page. 1 Load paper. 2 Open a Web page using Microsoft Internet Explorer 5.5 or later. 3 If you want to check or change your print settings: a From the Toolbar, click Lexmark ΠPage Setup. b Adjust the print settings. c Click OK
  • Lexmark Z1520 | User's Guide - Page 33
    instructions that From the Lexmark logo drop- Setup. 3 In the Copies section of the Quality/Copies tab, enter the number of copies you want to print. Note: If you print multiple copies of a multiple-page document and want them collated, click Collate Copies. 4 Click OK to close any printer software
  • Lexmark Z1520 | User's Guide - Page 34
    1 With a document open, click File Œ Print. 2 Click Properties, Preferences, Options, or Setup. 3 Click the Quality/Copies tab. 4 From the Multiple Copies section, click Collate Copies. 5 Click OK to close any printer software dialog boxes that are open. 6 Print the document. Notes: • This option is
  • Lexmark Z1520 | User's Guide - Page 35
    For Windows Vista, click ΠControl Panel ΠPrinter. For Windows XP, click Start ΠSettings ΠPrinters and Faxes. 2 Right-click the Lexmark 1500 Series icon. 3 Select Pause. Canceling print jobs 1 In Windows Vista, click ΠControl Panel ΠPrinter. In Windows XP, click Start ΠSettings ΠPrinters and
  • Lexmark Z1520 | User's Guide - Page 36
    any printer software dialogs that are open. 8 Click OK or Print. Printing greeting cards, index cards, photo cards, and postcards 1 Load greeting cards, index cards, photo cards, or postcards. 2 With a document open, click File ΠPrint. 3 Click Properties, Preferences, Options, or Setup. 4 Select
  • Lexmark Z1520 | User's Guide - Page 37
    pages to select or cancel them. 8 Click OK to close any printer software dialogs that are open. 9 Print the document. Note: Certain programs may a document open, click File ΠPrint. 4 Click Properties, Preferences, Options, or Setup. 5 Click the Print Layout tab, and then click Booklet. 6 If you are
  • Lexmark Z1520 | User's Guide - Page 38
    to 10 iron-on transfers. 2 With an image open, click File ΠPrint. 3 Click Properties, Preferences, Options, or Setup. 4 From the Print Layout tab, select Mirror if you want the printer software to flip the image. Select Normal if you have a program that automatically flips the image. 5 Click OK to
  • Lexmark Z1520 | User's Guide - Page 39
    , select Letter Banner or A4 Banner from the Banner Paper Size dialog. 5 From the Paper Setup tab, select Landscape orientation. 6 Click OK. 7 Click OK or Print. Changing printer settings Saving and deleting print settings 1 With a document open, click File ΠPrint. 2 Click Properties, Preferences
  • Lexmark Z1520 | User's Guide - Page 40
    . If you want to print two-sided documents on another size or type of paper, use the manual duplexing method. A A A A A To print a two-sided copy, the light must be on. The printer software. To access the Duplexing settings: 1 With a document open, click File ŒPrint. button works in tandem with
  • Lexmark Z1520 | User's Guide - Page 41
    a document open, click File ΠPrint. 2 Click Properties, Preferences, Options, or Setup. 3 Click the Print Layout tab. 4 From the Duplexing area, select Manual from the drop-down box. 5 Select the Print manual duplex instructions check box. 6 The printer will print the odd-numbered pages and the
  • Lexmark Z1520 | User's Guide - Page 42
    A 7 Following the instruction sheet, flip and reload the paper print side down. 8 The printer will then print the even-numbered pages on the reverse sides of the odd-numbered pages, button, return to the Duplexing drop-down box, and reset to the default setting, "Use Printer Settings." 42
  • Lexmark Z1520 | User's Guide - Page 43
    to indicate the memory card is being read or is transmitting data. Warning: Do not touch cables, any network adapter, the memory card, or the printer in the area shown while actively printing, reading, or writing from a memory card. A loss of data can occur. Also, do not remove a memory card while
  • Lexmark Z1520 | User's Guide - Page 44
    the computer recognizes that a memory card is installed, the message New photos have been found. What do you want to do? appears. If the printer does not read the memory card, remove and reinsert it. For more information, see "Memory card troubleshooting" on page 102. Note: The computer recognizes
  • Lexmark Z1520 | User's Guide - Page 45
    . If the computer is connected to a wireless network, you will need to select the printer. Note: For a network connection, you must manually open the application and select the printer you want to use. The Productivity Studio software launches automatically on your computer. 2 Click Automatically
  • Lexmark Z1520 | User's Guide - Page 46
    printer with the label facing the printer control panel. The Productivity Studio software launches automatically on your computer. Note: For a wireless computer using Microsoft Scanner and Camera Wizard. 4 If you are using Windows 2000: a From the desktop, double-click the Productivity Studio icon.
  • Lexmark Z1520 | User's Guide - Page 47
    to do?" screen appears. Click Transfer Photos to your computer using the Productivity Studio. If you are using Windows 2000: a From the desktop, double-click the Productivity Studio icon. b Click Transfer Photos. 4 Click Select photos to save. 5 Click Deselect All. 6 Click to select the
  • Lexmark Z1520 | User's Guide - Page 48
    the Tools menu, click Preferences. 3 Click Transfer Settings. a Select "Skip Save option and go automatically to", and choose to Automatically Save, Manually Save, or Print your photos from the photo storage device connected to your computer. b Click Browse to choose a different folder to transfer
  • Lexmark Z1520 | User's Guide - Page 49
    to let the software automatically reduce the appearance of red-eye in your image. Note: Click Undo at the top of the window if you are to let the software reduce the red-eye effect automatically. If you are not satisfied with the results, continue with the following steps. 4 Click Manual Red-Eye
  • Lexmark Z1520 | User's Guide - Page 50
    setting. You can preview the changes to your image by comparing the Before and After preview panes at the top of the window. Note: Click Automatic to let the software automatically enhance your photo. 5 Click OK to accept your changes, or click Cancel to reject them. Changing the Hue / Saturation of
  • Lexmark Z1520 | User's Guide - Page 51
    the window. 5 Click OK to accept your changes, or click Cancel to reject them. Note: You can let the software you are not sure which side is the printable side, see the instructions that came with the paper.) 2 Insert a CD or any removable Printer drop-down list, select the paper size. 51
  • Lexmark Z1520 | User's Guide - Page 52
    to let the software edit your photo(s) automatically. Click More Retouch Tools to go to the photo-editing window. When you've From the Quality drop-down list, select a copy quality. 6 From the Paper Size in Printer drop-down list, select the paper size. 7 To select multiple prints of a photo, or
  • Lexmark Z1520 | User's Guide - Page 53
    Size in Printer drop-down list. Paper sizes supported Dimensions A4 printable side, see the instructions that came with the paper software opens on your computer. 5 Change the print settings as necessary. You can select a print quality, the paper size in the printer, the paper type in the printer
  • Lexmark Z1520 | User's Guide - Page 54
    mode. For more information, see the documentation that came with your camera. • The printer recognizes one active media device at a time. If you have a memory card already came with your camera. 4 Follow the instructions in the documentation that came with your camera to select and print photos. 54
  • Lexmark Z1520 | User's Guide - Page 55
    instructions that came with the paper.) 2 Insert one end of the USB cable into the camera. 3 Insert the other end of the cable into the PictBridge port on the front of the printer . 6 Click View Show in the lower-right corner of the window to start the slideshow. Note: You can exit the slideshow any
  • Lexmark Z1520 | User's Guide - Page 56
    Maintaining the printer Installing print cartridges 1 Open the printer. 2 Remove the used print cartridge or cartridges. 3 If you are installing new print cartridges, remove the tape from the back and bottom of the black cartridge, and insert the cartridge in the left carrier. Warning: Do not touch
  • Lexmark Z1520 | User's Guide - Page 57
    6 Close the color cartridge carrier lid. 7 Close the printer. W I F I PRINTING Note: The printer must be closed to start a new print job. 8 Press . Removing a used print cartridge 1 Make sure the printer is on. 2 Lift the access cover. The print cartridge carrier moves and stops at the loading
  • Lexmark Z1520 | User's Guide - Page 58
    4 for the second cartridge. Using genuine Lexmark print cartridges Lexmark printers, print cartridges, and photo paper are designed to perform together for superior print quality. If you receive an Out of Original Lexmark Ink message, the original Lexmark ink in the indicated cartridge (s) has been
  • Lexmark Z1520 | User's Guide - Page 59
    In Windows Vista, click . • In Windows XP and earlier, click Start. 3 Click Programs or All Programs Œ Lexmark 1500 Series. 4 Click Lexmark Solution Center. 5 From the Maintenance tab, click Align to fix blurry edges. 6 Follow the instructions on the computer screen. If you aligned the cartridges to
  • Lexmark Z1520 | User's Guide - Page 60
    may damage the finish of the printer. 4 Wipe only the outside of the printer, making sure to remove any ink residue that has accumulated on the paper exit tray. Warning: Using a damp cloth to clean the interior may cause damage to your printer. 5 Make sure the paper support and paper exit tray are
  • Lexmark Z1520 | User's Guide - Page 61
    you are ready to install them. • Do not remove a cartridge from the printer except to replace, clean, or store it in an airtight container. The cartridges do not print correctly if left exposed for an extended period of time. Ordering supplies Ordering print cartridges Lexmark 1500 Series models
  • Lexmark Z1520 | User's Guide - Page 62
    vary by country or region. Paper size • Letter • A4 • 4 x 6 in. • 10 x 15 cm • Letter • A4 • 4 x 6 in. • 10 x 15 cm •L For information on how to purchase Lexmark Photo Paper or Lexmark PerfectFinish Photo Paper in your country or region, go to www
  • Lexmark Z1520 | User's Guide - Page 63
    interfere with the wireless signal. • The power supply is connected to the printer, and is lit. • The Wi-Fi indicator light is green. • The printer driver is installed on the computer from which you are performing a task. • The correct printer port is selected. Setup Troubleshooting Power button is
  • Lexmark Z1520 | User's Guide - Page 64
    a cartridge installed in the printer. If you are using a photo cartridge, make sure there is also a color cartridge installed. If a cartridge is missing, install the missing cartridge. Check the ink level of the color print cartridge The color cartridge may be low on ink or out of ink. Check the ink
  • Lexmark Z1520 | User's Guide - Page 65
    camera • Flash drive Any other USB devices are not recognized. Make sure the paper size setting on the camera is supported by the printer Use only the following paper sizes when printing photos from your camera: • 3.5 x 5 inches • 4 x 6 inches • 4 x 8 inches • 5 x 7 inches • 10 x 20 inches • Letter
  • Lexmark Z1520 | User's Guide - Page 66
    Software does not install These are possible solutions. Try one or more of the following: Check your operating system The following operating systems are supported: Windows Vista, Windows XP, Windows 2000 with Service Pack 3 or later, and Mac OS X. Check your system requirements Check that your
  • Lexmark Z1520 | User's Guide - Page 67
    paper. Check ink Check the ink levels, and install new print cartridges if necessary. Check cartridges 1 Remove the print cartridges. 2 Make sure the sticker and tape have been removed. 1 2 3 Reinsert the cartridges. Check printer default and pause settings 1 Click: • In Windows Vista: Œ Control
  • Lexmark Z1520 | User's Guide - Page 68
    to remove and reinstall the printer software. 1 In Windows Vista, click . In Windows XP or earlier, click Start. 2 Click Programs or All Programs ΠLexmark 1500 Series. 3 Select Uninstall. 4 Follow the instructions on the computer screen to remove the printer software. 5 Restart the computer before
  • Lexmark Z1520 | User's Guide - Page 69
    drive. If the software still does not install correctly, visit our Web site at www.lexmark.com to check for the latest software. 1 In all countries or regions except the United States, select your country or region. 2 Click the links for drivers or downloads. 3 Select your printer family. 4 Select
  • Lexmark Z1520 | User's Guide - Page 70
    network. If you need help finding the MAC address, see "Finding the MAC address" on page 22. Wi-Fi indicator light is blinking orange during installation When the Wi-Fi indicator light is blinking orange, it indicates that the printer has been set up for wireless networking but cannot connect to the
  • Lexmark Z1520 | User's Guide - Page 71
    the printer to your network. If you need help finding the MAC address, see "Finding the MAC address" on page 22. Ping the wireless access point (wireless router) to make sure the network is working 1 If you do not already know it, find the IP address of the access point. a Click: • In Windows Vista
  • Lexmark Z1520 | User's Guide - Page 72
    • In Windows Vista: . • In Windows XP and earlier: Start. 2 Click Programs or All Programs Œ Lexmark 1500 Series. 3 Click Wireless Setup. Note: You may be prompted to connect the printer to the computer again using the installation cable as part of the setup process. 4 Follow the instructions on the
  • Lexmark Z1520 | User's Guide - Page 73
    , and then unplug the power cord from the wall outlet. Warning: Failure to unplug the printer can cause damage to your printer and to the internal wireless print server. Make sure the printer is turned off and the power cord is unplugged from the wall outlet before you proceed. 2 While holding
  • Lexmark Z1520 | User's Guide - Page 74
    be found on the network Make sure: • The printer has power and the light is on. • The printer is within range of the wireless network. • The printer is located away from other electronic devices that may interfere with the wireless signal. • Your wireless network is using a unique network name (SSID
  • Lexmark Z1520 | User's Guide - Page 75
    driver is not installed, insert the installation software CD into your computer. 3 Follow the instructions on the computer screen. Note: You must install the printer driver on each computer that uses the network printer. Check if printer is connected to the wireless network 1 Print a network setup
  • Lexmark Z1520 | User's Guide - Page 76
    network name The network name, or SSID (Service Set Identifer) is a setting on a wireless device that allows devices to join the same wireless network. For more information, see "Checking your network name" for Windows or Mac in the "Wireless troubleshooting" section. Reboot the computer Turn off
  • Lexmark Z1520 | User's Guide - Page 77
    , see "Ping the printer" for Windows or Mac in the "Wireless troubleshooting" section. Run the wireless setup again If your wireless settings have changed, you will need to run the printer wireless setup again. Some reasons your settings may have changed include your having manually changed your WEP
  • Lexmark Z1520 | User's Guide - Page 78
    capital letters. 2 Click Programs or All Programs ΠLexmark 1500 Series. 3 Click Wireless Setup. Note: You may be prompted to connect the printer to the computer again using the installation cable as part of the setup process. 4 Follow the instructions on the computer screen, including typing in the
  • Lexmark Z1520 | User's Guide - Page 79
    USB port on the back of the printer. 4 Cancel the software installation. 5 Click Programs or All Programs ΠLexmark 1500 Series. 6 Click Wireless Setup Utility. 7 Follow the prompts on the computer screen to reinstall the software. Checking your network name (Windows users only) Make sure your
  • Lexmark Z1520 | User's Guide - Page 80
    , see "Run the Wireless Setup Utility". Run the Wireless Setup Utility (Windows users only) 1 Click Programs or All Programs ΠLexmark 1500 Series. 2 Click Wireless Setup Utility. Note: You may be prompted to connect the printer to the computer again using the installation cable as part of
  • Lexmark Z1520 | User's Guide - Page 81
    3 Follow the instructions on the computer screen. Changing wireless settings after installation (Windows users only) To change your password, network name, or other wireless setting: 1 Click Programs or All Programs ΠLexmark 1500 Series. 2 Click Wireless Setup Utility. Note: You may be prompted to
  • Lexmark Z1520 | User's Guide - Page 82
    cartridges. For more information, see "Removing a used print cartridge" on page 57 and "Installing print cartridges ink Check the ink levels, and install new print cartridges if necessary. Remove sheets as they are printed To avoid ink paper Each paper brand accepts ink differently and prints with
  • Lexmark Z1520 | User's Guide - Page 83
    , unwrinkled paper. Removing and reinstalling the software Software may not be installed correctly. Poor quality at the edges of size matches the printer setting 1 From the software application, click File ΠPrint. 2 Click Properties, Preferences, Options, or Setup. 3 Click Paper Setup. 4 Check the
  • Lexmark Z1520 | User's Guide - Page 84
    low on ink? 1 Do one of the following: • In Windows Vista, click . • In Windows XP and earlier, click Start. 2 Click Programs or All Programs Œ Lexmark 1500 Series. 3 Click Solution Center. 4 If an exclamation point (!) appears on a cartridge, the ink level is low. Install a new cartridge. For more
  • Lexmark Z1520 | User's Guide - Page 85
    printing a large file? The ink levels displayed in the printer software are not updated during a print job; they represent the ink level at the beginning of a print job. The ink levels may seem inconsistent in the Printing Status window when you are printing a large file. Ink levels seem to go down
  • Lexmark Z1520 | User's Guide - Page 86
    the printer Windows may have solved the problem, test the Lexmark 1500 Series. 2 Click Solution Center. 3 If an exclamation point (!) appears on either of the print cartridges, the ink level is low. Install a new cartridge. For more information, see "Installing print cartridges". For cartridge
  • Lexmark Z1520 | User's Guide - Page 87
    may need to change the printer software settings, or the problem may be that the printer and the computer are not able to communicate properly. Are the printer and the computer able to communicate data? Check the printer status: 1 Do one of the following: • In Windows Vista, click Œ Control Panel
  • Lexmark Z1520 | User's Guide - Page 88
    , or Setup. 3 From the Quality/Copies tab, select: • Photo when printing photos • Normal when printing transparencies Align the print cartridges 1 Do one of the following: • In Windows Vista, click Œ Control Panel. • In Windows XP or 2000, click Start. 2 Click Programs or All Programs Œ Lexmark 1500
  • Lexmark Z1520 | User's Guide - Page 89
    the application. Perform maintenance on the print cartridges You may need to clean the print cartridge nozzles. Checking the printer status Windows Vista users only 1 Click ŒControl Panel Œ Printer. 2 Make sure: • The printer icon does not say Paused. If the printer is paused, right-click the icon
  • Lexmark Z1520 | User's Guide - Page 90
    Windows Vista, click . • In Windows XP and earlier, click Start. 2 Click Programs or All Programs Œ Lexmark 1500 Series. 3 Click Solution Center. If an exclamation point (!) appears on either of the print cartridges, the ink level is low. Install a new cartridge the back of the printer. 3 Check that
  • Lexmark Z1520 | User's Guide - Page 91
    printer? Windows may substitute different fonts. Line and page breaks may change with the font. Use the program that created the document to fix these problems, and then save the changes for the next time you print. Printer Click Properties, Preferences, Options, or Setup. 3 From the Quality/Copies
  • Lexmark Z1520 | User's Guide - Page 92
    is not damaged and that the light is on. Make sure the cartridges are properly installed With the front of the printer facing you, check for proper print cartridge installation. If you are using a color cartridge, make sure it is properly installed in the right carrier. If you are using a black
  • Lexmark Z1520 | User's Guide - Page 93
    to a USB port on the computer. To verify the USB port: 1 In Windows Vista, click Œ Control Panel Œ Printers (under Hardware and Sound). In Windows XP, click Start Œ Settings ŒPrinters and Faxes. 2 Right-click the Lexmark 1500 Series icon. 3 From the sidebar menu, select Properties. 4 Click the Ports
  • Lexmark Z1520 | User's Guide - Page 94
    the host computer, but you still cannot print, try to locate the printer from the remote computer. Windows 2000, Windows XP, or Windows Vista users: 1 Open the Printers or Printers and Faxes folder. 2 Right-click the Lexmark 1500 Series icon. 3 Click Properties. 4 Click the Ports tab, and then click
  • Lexmark Z1520 | User's Guide - Page 95
    Load paper. 2 Press . Updating the printer software The printer software needs to be updated to run properly. 1 Start Windows. 2 When the desktop appears, insert the software CD for Windows. The installation screen appears. 3 Click Install. 4 When the Existing Printer Driver Found dialog box appears
  • Lexmark Z1520 | User's Guide - Page 96
    describes the problem. • Print stored on the memory device are supported by the programs installed on your computer. Check the printer from the computer. Make sure the printer is connected to the computer through a USB cable You cannot print directly from a memory device if you are using a wireless
  • Lexmark Z1520 | User's Guide - Page 97
    settings on your digital camera, see the documentation that came with your camera. Jams and misfeeds troubleshooting Paper jam in the printer 1 Firmly grasp the paper, and gently pull it out. 2 Press . Paper jam in the paper support 1 Firmly grasp the paper, and gently pull it out. 2 Press . 97
  • Lexmark Z1520 | User's Guide - Page 98
    Paper jam in the duplex unit 1 Push down on the duplex latch as you grasp the duplex unit. 2 Pull out the duplex unit. 3 Firmly grasp the paper, and gently pull it out. 4 Push down on the duplex latch as you reinstall the duplex unit. 98
  • Lexmark Z1520 | User's Guide - Page 99
    loading amounts per paper type • Specific loading instructions for supported paper and specialty media Remove each page as it guides Adjust the paper guides: • When using media less than 8.5 inches wide • To rest against the edges of the paper or media, making sure it does not buckle 1 2 Printer
  • Lexmark Z1520 | User's Guide - Page 100
    settings 1 Do one of the following: • In Windows Vista, click Œ Control Panel Œ Printers. • In Windows XP, click Start Œ Settings Œ Printers and Faxes. • In Windows 2000, click Start Œ Settings Œ Printers. 2 Double-click the print queue device. 3 Click Printer. • Make sure no check mark appears next
  • Lexmark Z1520 | User's Guide - Page 101
    Check the paper size and type to make sure the paper is supported by the printer. If you are using automatic duplexing, use only letter- or A4 is properly installed Remove the duplex unit and reinstall it. For more information, see "Paper jam in the duplex unit" on page 98. Cartridge carrier jam
  • Lexmark Z1520 | User's Guide - Page 102
    cartridges. 5 Snap the lids closed. 6 Close the access cover. 7 Press . Memory card troubleshooting Memory card cannot be inserted There are possible solutions. Try one or more of the following: Check memory card type Make sure that the type of memory card you are using can be used in the printer
  • Lexmark Z1520 | User's Guide - Page 103
    In Windows XP and earlier, click Start ΠSettings ΠPrinters and Faxes. 2 From the list shown, select the printer on your wireless network. Note: To select the printer, right click the printer, and then select Set as Default Printer. 3 Insert the memory card in the printer. 4 Follow the instructions
  • Lexmark Z1520 | User's Guide - Page 104
    down: 1 Do one of the following: • In Windows Vista, click Œ Control Panel Œ Printers. • In Windows XP and earlier, click Start Œ Settings Œ Printers or Printers and Faxes. 2 Click Programs or All Programs Œ Lexmark 1500 Series. 3 Click Wireless Setup Utility. Error messages on the computer screen
  • Lexmark Z1520 | User's Guide - Page 105
    " on page 89. Ink Low A print cartridge is almost out of ink. Install a new cartridge. For more information, see "Installing print cartridges" on page 56. To order a new cartridge, see "Ordering paper and other supplies" on page 61. Out of Memory The printer software cannot obtain enough memory
  • Lexmark Z1520 | User's Guide - Page 106
    information on supported file types, see the User's Guide on the CD that came with your printer. Paper Jam The printer has a paper jam, and you must clear the paper path. Note: To avoid paper jams, do not force paper into the printer. Multiple All-In-Ones found Multiple Lexmark printers, attached
  • Lexmark Z1520 | User's Guide - Page 107
    in conjunction with other products, programs, or services, except those expressly designated by the manufacturer, are the user's responsibility. For Lexmark technical support, visit support.lexmark.com. For information on supplies and downloads, visit www.lexmark.com. If you don't have access to
  • Lexmark Z1520 | User's Guide - Page 108
    your product hardware or software. CAUTION: A CAUTION Lexmark Technology & Services Lexmark International, Inc. 740 West New Circle Road Lexington, KY 40550 (859) 232-3000 Exposure to radio frequency radiation The following notice is applicable if your printer has a wireless network card installed
  • Lexmark Z1520 | User's Guide - Page 109
    and Technical Support, Lexmark International, Inc., S.A., Boigny, France. This product satisfies the Class B limits of EN 55022 and safety requirements of EN 60950. Industry Canada notice The following notices are applicable if your printer has a wireless network card installed. Industry Canada
  • Lexmark Z1520 | User's Guide - Page 110
    . A declaration of conformity with the requirements of the directives is available from the Director of Manufacturing and Technical Support, Lexmark International, S. A., Boigny, France. The following restrictions apply: Country/region Restriction All countries/regions This product is for indoor
  • Lexmark Z1520 | User's Guide - Page 111
    of our products. If you have further questions about recycling options, visit the Lexmark Web site at www.lexmark.com for your local sales office phone number. Product disposal Do not dispose of the printer or supplies in the same manner as normal household waste. Consult your local authorities
  • Lexmark Z1520 | User's Guide - Page 112
    table represent time-averaged measurements. Instantaneous power draws may be substantially higher than the average. Values are subject to change. See www.lexmark.com for current values. Power Saver This product is designed with an energy-saving mode called Power Saver. The Power Saver Mode is
  • Lexmark Z1520 | User's Guide - Page 113
    print cartridges, programs, data, and removable storage media (unless directed otherwise by Lexmark). For further explanation of your warranty alternatives and the nearest Lexmark authorized servicer in your area, contact Lexmark at (800) 332-4120, or on the World Wide Web at http://support.lexmark
  • Lexmark Z1520 | User's Guide - Page 114
    or its suppliers, governs your use of any Software Program installed on or provided by Lexmark for use in connection with your Lexmark product. The term "Software Program" includes machine-readable instructions, audio/visual content (such as images and recordings), and associated media, printed
  • Lexmark Z1520 | User's Guide - Page 115
    of this License Agreement: a Use. You may Use one (1) copy of the Software Program. The term "Use" means storing, loading, installing, executing, or displaying the Software Program. If Lexmark has licensed the Software Program to you for concurrent use, you must limit the number of authorized users
  • Lexmark Z1520 | User's Guide - Page 116
    with the terms of this License Agreement, any other written agreement signed by you and Lexmark relating to your Use of the Software Program). To the extent any Lexmark policies or programs for support services conflict with the terms of this License Agreement, the terms of this License Agreement
  • Lexmark Z1520 | User's Guide - Page 117
    server infrastructure mode installation cable internal wireless print server IP (Internet Protocol) address ipconfig MAC (Media Access Control) address MAC filtering network adapter/card network hub network name ping printer nickname router security key signal strength SSID (Service Set Identifier
  • Lexmark Z1520 | User's Guide - Page 118
    ) USB cable USB port WEP (Wired Equivalent Privacy) wireless access point wireless router Wi-Fi WPA (Wi-Fi Protected Access) WPA2 An address assigned to a network printer or print server by the manufacturer. To find the UAA, print a network setup page and look for the UAA listing. A lightweight
  • Lexmark Z1520 | User's Guide - Page 119
    Troubleshooting installation 77 changing wireless settings after installation (Windows) 81 characters on printout are missing or unexpected 85 check printer ports (Windows) 81 checking printer readiness 89 checking your network name (Windows) 79 cleaning exterior of the printer 60 print cartridge
  • Lexmark Z1520 | User's Guide - Page 120
    memory cards 43 installing network printer 24 print cartridges 56 printer software 16, 68 internal wireless print server 16 resetting to factory default settings 77 IP address, assigning 24 iron-on transfers, loading 30 iron-on transfers, printing 38 J jams and misfeeds troubleshooting banner paper
  • Lexmark Z1520 | User's Guide - Page 121
    nozzles, cleaning 59 print cartridges aligning 59 cleaning the nozzles 59 installing 56 ordering 61 preserving 61 refilling 58 removing 57 using genuine Lexmark 58 wiping 59 print file error 106 print is dark or smudged 87 print jobs canceling 35 print quality troubleshooting skewed print 84 print
  • Lexmark Z1520 | User's Guide - Page 122
    eye automatic reduction 49 manual reduction 49 refilling print cartridges 58 removing print cartridges 57 resetting internal wireless print server to factory default settings 77 printer to factory default 40 reverse page order 34 rotating photo 48 run the Wireless Setup Utility (Windows) 80 S safety
  • Lexmark Z1520 | User's Guide - Page 123
    , setup duplex light is blinking 64 page does not print 67 power button is not lit 63 power light is blinking 64 software does not install 66 troubleshooting, wireless changing wireless settings after installation 77 changing wireless settings after installation (Windows) 81 check printer ports
  • Lexmark Z1520 | User's Guide - Page 124
    12 wireless network printer does not print 75 wireless printer is no longer working 76 Wireless Setup Utility cannot communicate with printer during installation 78 wireless troubleshooting changing wireless settings after installation 77 changing wireless settings after installation (Windows) 81
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
1500 Series User's Guide
June 2007
www.lexmark.com