Lexmark Z22 Color Jetprinter User's Guide for Windows 95, Windows 98, and Maci - Page 6

Loading specialty paper Load up to: 10 envelopes 10 greeting cards, index cards, postcards, or photo cards 25 sheets of photo paper, glossy paper, or coated paper 20 sheets of banner paper 10 transparencies 100 sheets of custom size paper 25 iron-on transfers Make sure: • The print side is facing you. • The stamp location is in the upper left corner. • The envelopes are loaded vertically against the right side of the sheet feeder. • The paper guide is against the side of the envelopes. • The print side is facing you. • The cards are loaded vertically against the right side of the sheet feeder. • The paper guide is against the side of the cards. • The glossy or coated side is facing you. • The paper guide is against the side of the photo paper. • You place the banner paper behind the printer. Then bring the unattached edge of the first page over the printer and into the sheet feeder. • The paper guide is against the side of the paper. Note: Make sure you select Banner or Banner A4 paper size in the Printer Properties. For help, see page 5. • The rough side of the transparency is facing you (smooth side down). • The paper guide is against the edge of the transparencies. • The print side is facing you and the paper guide is against the side of the paper. • Your paper size fits within these dimensions: - Width: 76 mm to 215.9 mm 3.0 in. to 8.5 in. - Length 127 mm to 432 mm 5.0 in. to 17.0 in. • You follow the instructions on the packaging to load the iron-on transfers. • The paper guide is against the side of the iron-on transfers. • 2 • • • Chapter 1 •