Lexmark Z22 Color Jetprinter User's Guide for Windows NT 4.0 and Windows 2000 - Page 36

To check your port settings in Windows 2000

Get Lexmark Z22 Color Jetprinter PDF manuals and user guides View all Lexmark Z22 Color Jetprinter manuals
Add to My Manuals
Save this manual to your list of manuals

Page 36 highlights

Steps to basic printing Maintaining your printer Troubleshooting Appendix Index Troubleshooting • Your printer software is set to an LPTn port if you are using a parallel cable or to a USB port if you are using a USB cable. Note: USB is not supported in Windows NT 4.0. USB is supported in Windows 2000. To check your port settings in Windows 2000: 1 Click Start. 2 Select Settings. 3 Click Printers. 4 Right click the Lexmark Z22/Z32 Series ColorFine icon. 5 Click Properties. 6 Click on the Ports tab. 7 Select USB or LPTn to change your port. 8 Select OK. If you have a switch box or other device (such as a scanner or fax) connected to the computer's parallel port, make sure it supports bidirectional communication. You may need to disconnect your printer from the switch box or other device and connect it directly to your computer. The Lexmark Z22 ships with a High Resolution Color cartridge only. You can instantly improve print speed and print quality by simply adding an optional Waterproof Black Cartridge (P/N 17G0050). 36

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
36
Troubleshooting
Maintaining your printer
Troubleshooting
Appendix
Index
Steps to basic printing
•
Your printer software is set to an LPT
n
port if you are using a
parallel cable or to a USB port if you are using a USB cable.
To check your port settings in Windows 2000:
1
Click Start.
2
Select Settings.
3
Click Printers.
4
Right click the Lexmark Z22/Z32 Series ColorFine icon.
5
Click Properties.
6
Click on the Ports tab.
7
Select USB or LPTn to change your port.
8
Select OK.
If you have a switch box or other device (such as a scanner or fax)
connected to the computer's parallel port, make sure it supports
bidirectional communication. You may need to disconnect your
printer from the switch box or other device and connect it directly to
your computer.
The Lexmark Z22 ships with a High Resolution Color cartridge only.
You can instantly improve print speed and print quality by simply
adding an optional Waterproof Black Cartridge (P/N 17G0050).
Note:
USB is
not
supported
in Windows NT
4.0. USB is
supported in
Windows 2000.