Lexmark Z2300 User's Guide - Page 15
Transparencies, Custom-size paper, The total thickness of paper does not exceed 10 mm 0.4 inches. - ink for
UPC - 734646062565
View all Lexmark Z2300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Make sure: • You follow the loading instructions that came with the labels. • The print side of the labels faces you. • The adhesive on the labels does not extend to within 1 mm of the edge of the label. • You use full label sheets. Partial sheets (with areas exposed by missing labels) may cause labels to peel off during printing, resulting in a paper jam. • The labels are loaded against the right side of the paper support. • The paper guide rests against the left edge of the labels. Transparencies Load up to 10 transparencies. Make sure: • The rough side of the transparencies faces you. • You don't use transparencies with paper backing sheets. • The transparencies are loaded against the right side of the paper support. • The paper guide rests against the left edge of the transparencies. Note: Transparencies require more drying time. Remove each transparency as it exits, and allow it to dry to avoid ink smudging. Custom-size paper Load up to 100 sheets of custom-size paper (depending on the thickness). Make sure: • The total thickness of paper does not exceed 10 mm (0.4 inches). • The print side of the paper faces you. • The paper size fits within these dimensions: Width: - 76-216 mm - 3.0-8.5 inches Length: - 127-432 mm - 5.0-17.0 inches • The paper is loaded against the right side of the paper support. • The paper guide rests against the left edge of the paper. 15