Lexmark Z32 Color Jetprinter User's Guide for Windows NT 4.0 and Windows 2000 - Page 30
Remove and reinstall the print cartridge.
View all Lexmark Z32 Color Jetprinter manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Steps to basic printing Maintaining your printer Troubleshooting Appendix Index Maintaining your printer When you install these cartridges: Black cartridge only Color cartridge only These purge lines print: 1 purge line 3 purge lines Black and Color cartridges 4 purge lines Photo and Color cartridges 6 purge lines 5 Compare the diagonal lines above the printed bars to the diagonal lines below the printed bars. Look for a break in the diagonal lines. A broken line indicates clogged nozzles. If the bottom line still has breaks, run the test two more times. • If the print quality is satisfactory after running the test three times, the print nozzles are clean. You do not need to complete the remaining steps. • If the print quality of both sets of lines is not satisfactory after running the test three times, go to step 6. 6 Remove and reinstall the print cartridge. 7 Repeat the nozzle test. 8 If the lines are still broken, continue with the next section, Wiping print nozzles and contacts. 30