LiftMaster 8160 8160 Installation Manual

LiftMaster 8160 Manual

Get LiftMaster 8160 PDF manuals and user guides View all LiftMaster 8160 manuals
Add to My Manuals
Save this manual to your list of manuals

LiftMaster 8160 manual content summary:

  • LiftMaster 8160 | 8160 Installation Manual - Page 1
    Installation Manual Models 8160• 8165• 8065• 8075 FOR RESIDENTIAL USE ONLY Please read this manual and the safety materials carefully! • The door WILL NOT CLOSE unless the devices and features are to be used ONLY with sectional doors. LiftMaster 845 Larch Avenue Elmhurst, Illinois 60126-1196
  • LiftMaster 8160 | 8160 Installation Manual - Page 2
    Contents Preparation 3 Assembly 9 Installation 10 Install the Door Control 18 Install the Protector System 21 Power 25 Adjustments 27 Operation 30 Maintenance 38 Troubleshooting 39 Accessories 41 Warranty 42 Repair Parts 43 2
  • LiftMaster 8160 | 8160 Installation Manual - Page 3
    Review Check the Door This garage door opener has been designed and tested to offer safe service provided it is installed, operated, maintained and tested in strict accordance with the instructions and warnings contained in this manual it should stay in place, supported entirely by its springs. 3.
  • LiftMaster 8160 | 8160 Installation Manual - Page 4
    Preparation Tools Needed 5/32 3/16 5/16 7/16 1/2 5/8 1/4 7/16 9/16 4
  • LiftMaster 8160 | 8160 Installation Manual - Page 5
    model, other accessories may be included with your garage door opener. The instructions for these accessories will be attached to the accessory and are not included in this manual. The images throughout this manual are for reference and your product may look different. A. Header bracket B. Pulley
  • LiftMaster 8160 | 8160 Installation Manual - Page 6
    model, other accessories may be included with your garage door opener. The instructions for these accessories will be attached to the accessory and are not included in this manual. The images throughout this manual are for reference and your product may look different. A. Header bracket B. Pulley
  • LiftMaster 8160 | 8160 Installation Manual - Page 7
    - Model 8160 Accessories will vary depending on the garage door opener model purchased. Depending on your specific model, other accessories may be included with your garage door opener. The instructions for these accessories will be attached to the accessory and are not included in this manual. The
  • LiftMaster 8160 | 8160 Installation Manual - Page 8
    model, other accessories may be included with your garage door opener. The instructions for these accessories will be attached to the accessory and are not included in this manual. The images throughout this manual are for reference and your product may look different. A. Header bracket B. Pulley
  • LiftMaster 8160 | 8160 Installation Manual - Page 9
    Assembly 1 Attach the Rail to the Garage Door Opener To avoid possible SERIOUS INJURY to finger from moving garage door opener: l ALWAYS keep hand clear of sprocket while operating opener. l Securely attach sprocket cover BEFORE operating. 2 Tighten the Chain 1. Loosen the inner nut and lock washer
  • LiftMaster 8160 | 8160 Installation Manual - Page 10
    until instructed to do so. 8. NEVER wear watches, rings or loose clothing while installing or servicing opener. warning label on wall next to garage door control. 11. Place manual release/safety reverse test label in plain view on inside of garage LiftMaster.com for installation instructions. 10
  • LiftMaster 8160 | 8160 Installation Manual - Page 11
    the garage door opener on a one-piece door, visit LiftMaster.com for installation instructions. Close the door and mark the inside vertical centerline of ), use lag screws (not provided) to securely fasten the 2x4 to structural supports. Open your door to the highest point of travel as shown. Draw an
  • LiftMaster 8160 | 8160 Installation Manual - Page 12
    wall above the garage door, or to the ceiling. Follow the instructions which will work best for your particular requirements. Do not install the holes. Drill 3/16" pilot holes and fasten bracket securely to a structural support with lag screws. Lag Screw 5/16"-9x1-5/8" OPTION A WALL INSTALLATION
  • LiftMaster 8160 | 8160 Installation Manual - Page 13
    release arm down to disconnect the inner and outer trolley. Slide the outer trolley toward the garage door opener. The trolley can remain disconnected until instructed. Clevis Pin 5/16" X 2-3/4" Connected Disconnected 13
  • LiftMaster 8160 | 8160 Installation Manual - Page 14
    from a falling garage door opener, fasten it SECURELY to structural supports of the garage. Concrete anchors MUST be used if installing ANY the bracket is not centered above the door). 7. Remove the 2x4. Operate the door manually. If the door hits the rail, raise the header bracket. NOTE: DO NOT
  • LiftMaster 8160 | 8160 Installation Manual - Page 15
    Installation 6 Install the Light Bulbs 7 Attach the Emergency Release Rope and Handle To prevent possible OVERHEATING of the endpanel or light socket: l DO NOT use short neck or specialty light bulbs. l DO NOT use halogen bulbs. Use ONLY incandescent. To prevent damage to the opener: l DO NOT use
  • LiftMaster 8160 | 8160 Installation Manual - Page 16
    according to the door manufacturer may void the door warranty. A horizontal and vertical reinforcement is needed for supports. A vertical reinforcement brace should cover the height of the top panel. Contact the garage door manufacturer or installing dealer for opener reinforcement instructions
  • LiftMaster 8160 | 8160 Installation Manual - Page 17
    Installation 9 Connect the Door Arm to the Trolley IMPORTANT: The groove on the straight door arm MUST face away from the curved door arm. 1. Close the door. Disconnect the trolley by pulling the emergency release handle. Slide the outer trolley back (away from the door) about 2" (5 cm). 2. Attach
  • LiftMaster 8160 | 8160 Installation Manual - Page 18
    , see page 41. Your garage door opener is compatible with up to 2 Smart Control Panels or 4 of any other Security+ 2.0® door controls. NOTE: Older LiftMaster door controls and third party products are not compatible. Install the door control within sight of the door at a minimum height of 5 feet
  • LiftMaster 8160 | 8160 Installation Manual - Page 19
    , see page 41. Your garage door opener is compatible with up to 2 Smart Control Panels or 4 of any other Security+ 2.0® door controls. NOTE: Older LiftMaster door controls and third party products are not compatible. Install the door control within sight of the door at a minimum height of 5 feet
  • LiftMaster 8160 | 8160 Installation Manual - Page 20
    tip. 3 Attach the warning labels 1. Attach the entrapment warning label on the wall near the door control with tacks or staples. 2. Attach the manual release/safety reverse test label in a visible location on the inside of the garage door. 1 2 7/16" (11 mm) Staple 3 RED WHITE WHITE GREY
  • LiftMaster 8160 | 8160 Installation Manual - Page 21
    Install the Protector System® Introduction Be sure power is NOT connected to the garage door opener BEFORE installing the safety reversing sensor. To prevent SERIOUS INJURY or DEATH from closing garage door: l Correctly connect and align the safety reversing sensor. This required safety device MUST
  • LiftMaster 8160 | 8160 Installation Manual - Page 22
    Nut 1/4"-20 The safety reversing sensors can be attached to the door track, the wall, or the floor. If the door track will not support the sensor bracket a wall installation is recommended. Choose one of the following installations. OPTION A DOOR TRACK INSTALLATION 1. Slide the curved arms of the
  • LiftMaster 8160 | 8160 Installation Manual - Page 23
    Install the Protector System® OPTION C FLOOR INSTALLATION Use an extension bracket (not provided) or wood block to raise the sensor bracket if needed. 1. Carefully measure the position of both sensor brackets so they will be the same distance from the wall and unobstructed. 2. Attach the sensor
  • LiftMaster 8160 | 8160 Installation Manual - Page 24
    Install the Protector System® OPTION B PRE-WIRED INSTALLATION 1. Cut the end of the safety reversing sensor wire, making sure there is enough wire to reach the pre-installed wires from the wall. 2. Separate the safety reversing sensor wires and strip 7/16 inch (11 mm) of insulation from each end.
  • LiftMaster 8160 | 8160 Installation Manual - Page 25
    Power 1 Connect Power To prevent possible SERIOUS INJURY or DEATH from electrocution or fire: l Be sure power is NOT connected to the opener, and disconnect power to circuit BEFORE removing cover to establish permanent wiring connection. l Garage door installation and wiring MUST be in compliance
  • LiftMaster 8160 | 8160 Installation Manual - Page 26
    Power 2 Ensure the Safety Reversing Sensors are Aligned The door will not close if the sensors have not been installed and aligned correctly. When the light beam is obstructed or misaligned while the door is closing, the door will reverse and the garage door opener lights will flash ten times. If
  • LiftMaster 8160 | 8160 Installation Manual - Page 27
    UP and DOWN buttons can be used to move the door as needed. PROGRAMMING BUTTONS UP Button Adjustment Button DOWN Button To watch a short instructional video on programming your new garage door opener use your smartphone to read the QR Code below. Your garage door opener is designed with electronic
  • LiftMaster 8160 | 8160 Installation Manual - Page 28
    Adjustments 1 Program the Travel Without a properly installed safety reversal system, persons (particularly small children) could be SERIOUSLY INJURED or KILLED by a closing garage door. l Incorrect adjustment of garage door travel limits will interfere with proper operation of safety reversal
  • LiftMaster 8160 | 8160 Installation Manual - Page 29
    Adjustments 2 Test the Safety Reversal System 3 Test the Protector System® Without a properly installed safety reversal system, persons (particularly small children) could be SERIOUSLY INJURED or KILLED by a closing garage door. l Safety reversal system MUST be tested every month. l After ANY
  • LiftMaster 8160 | 8160 Installation Manual - Page 30
    SEVERE INJURY or DEATH: 1. READ AND FOLLOW ALL WARNINGS AND INSTRUCTIONS. 2. ALWAYS keep remote controls out of reach of children. INJURY or DEATH from electrocution, disconnect ALL electric power BEFORE performing ANY service or maintenance. 14. This operator system is equipped with an unattended
  • LiftMaster 8160 | 8160 Installation Manual - Page 31
    and Security+ 2.0® accessories, see page 41. NOTE: Older LiftMaster remote controls, door controls, and third party products are not Security+ 2.0® Accessories MEMORY CAPACITY Remote Controls Up to 12 Door Controls Model 8160: 1 Smart Control Panel or 2 of any other Security+ 2.0® door
  • LiftMaster 8160 | 8160 Installation Manual - Page 32
    Operation Using the Door Control SYNCHRONIZE THE DOOR CONTROL To synchronize the door control to the garage door opener, press the push button until the garage door opener activates (it may take up to 3 presses). Test the door control by pressing the push button, each press of the push button will
  • LiftMaster 8160 | 8160 Installation Manual - Page 33
    to 3 presses). Test the door control by pressing the push bar, each press of the push bar will activate the garage door opener. Push Bar SERVICE LED LEARN Button LOCK Button COMMAND LED LIGHT Button PUSH BAR Press the push bar to open or close the door. LIGHT BUTTON Press the
  • LiftMaster 8160 | 8160 Installation Manual - Page 34
    , the LOCK feature needs to be deactivated. MAINTENANCE ALERT SYSTEM (MAS): Activate/Deactivate: Press and hold the LEARN button. Then press the LIGHT button. The service LED will flash the status; Active is 2 flashes and deactivated is 3 flashes. LOCK Button LIGHT Button
  • LiftMaster 8160 | 8160 Installation Manual - Page 35
    be done through the door control or the learn button the garage door opener. To program additional accessories refer to the instructions provided with the accessory or visit LiftMaster.com. If your vehicle is equipped with a Homelink®, you may require an external adapter depending on the make, model
  • LiftMaster 8160 | 8160 Installation Manual - Page 36
    be done through the door control or the learn button the garage door opener. To program additional accessories refer to the instructions provided with the accessory or visit LiftMaster.com. If your vehicle is equipped with a Homelink®, you may require an external adapter depending on the make, model
  • LiftMaster 8160 | 8160 Installation Manual - Page 37
    trolley from reconnecting automatically. 1. Pull the emergency release handle down and back (toward the opener). The door can then be raised and lowered manually as often as necessary. 2. To disengage the lockout feature, pull the handle straight down. The trolley will reconnect on the next UP or
  • LiftMaster 8160 | 8160 Installation Manual - Page 38
    Maintenance Maintenance Schedule EVERY MONTH l Manually operate door. If it is unbalanced or binding, call (IC) rules, adjustment or modifications of this transceiver are prohibited. THERE ARE NO USER SERVICEABLE PARTS. This device complies with Part 15 of the FCC rules and IC RSS-210. Operation
  • LiftMaster 8160 | 8160 Installation Manual - Page 39
    Troubleshooting Diagnostic Chart Your garage door opener is programmed with self- that would interrupt the sensor's path while closing. 1 5 Door moves 6-8" (15-20 cm) stops or Manually open and close the door. Check for binding or obstructions, such as a broken reverses. spring or door lock
  • LiftMaster 8160 | 8160 Installation Manual - Page 40
    Troubleshooting DIAGNOSTIC CODE Up Arrow Flash Down Arrow (es) Flash(es) 4 1-4 4 5 4 6 SYMPTOM Door is moving stops or reverses. Opener runs approximately 6-8" (15-20 cm), stops and reverses. The garage door opener will not close and the light bulbs flash. SOLUTION Manually or LiftMaster®
  • LiftMaster 8160 | 8160 Installation Manual - Page 41
    MyQ® technology. 829LM 823LM Remote Light Switch: Automatically control your lights using your garage door opener, a Security+ 2.0® remote control or a LiftMaster® Internet Gateway. Simply replaces your current wired wall switch. 877MAX Garage and Gate Monitor: Monitor open/closed status for up
  • LiftMaster 8160 | 8160 Installation Manual - Page 42
    this product. You will be advised of disassembly and shipping instructions when you call. Then send the product or component, pre-paid and insured, as directed to our service center for warranty repair. Please include a brief description of the problem and a dated proof-of-purchase receipt with any
  • LiftMaster 8160 | 8160 Installation Manual - Page 43
    Repair Parts Models 8065 and 8075 Rail Assembly Parts Description 1 Master link kit 2 Chain pulley bracket 3 Complete trolley assembly 4 One-piece rail - 7' (2.1 m) 5 Full Chain assembly Not Shown Rail Grease Part Number 1A995 41A4813 41A3489 1707LM 41D3484 83A11-2 1 4 2 3 5 Installation Parts
  • LiftMaster 8160 | 8160 Installation Manual - Page 44
    Repair Parts Model 8065 Garage Door Opener Parts 13 12 10 1 2 3 7 8 4 9 11 56 Description 1 Sprocket cover 2 Gear and sprocket 3 Drive and Worm Gear 4 Front end panel with all labels 5 Light socket 6 Light lens 7 Capacitor 8 Capacitor bracket 9 Universal motor 10 Travel module 11 Cover 12
  • LiftMaster 8160 | 8160 Installation Manual - Page 45
    Repair Parts Model 8075 Garage Door Opener Parts 13 12 10 1 2 3 7 8 4 9 56 Description 1 Chain spreader 2 Gear and sprocket 3 Drive and Worm Gear 4 Front end panel with all labels 5 Light socket 6 Light lens 7 Capacitor 8 Capacitor bracket 9 Universal motor 10 Travel module 11 Cover 12 Logic
  • LiftMaster 8160 | 8160 Installation Manual - Page 46
    Description Part Number 1 Multi-function door control 882LMW 2 1-Button remote control (Model 8165) 891LM 3 3-Button remote control (Model 8160) 893LM 4 3V CR2032 Lithium battery 10A20 5 Remote control visor clip 29B137 6 Emergency release rope and handle assembly 41A2828 7 2-Conductor
  • LiftMaster 8160 | 8160 Installation Manual - Page 47
    Repair Parts Model 8160 Garage Door Opener Parts 2 3 4 1 9 6 7 5 Description 1 Sprocket and sprocket cover 2 End panel with light socket 3 Light lens 4 Light socket 5 Cover 6 Motor with travel module 7 Travel module 8
  • LiftMaster 8160 | 8160 Installation Manual - Page 48
    Country Club Rd. Tucson, AZ 85706 For installation and service information call: 1-800-528-9131 Or visit us online at: LiftMaster.com Before calling, please have the model number of the garage door opener. If you are calling about a troubleshooting issue, it is recommended that you have access to
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
Please read this manual and the safety
materials carefully!
•
The door WILL NOT CLOSE unless the
Protector System
®
is connected and
properly aligned.
•
Periodic checks of the garage door
opener are required to ensure safe
operation.
•
The model number label is located on
the front panel of your garage
door opener.
•
This garage door opener is ONLY
compatible with MyQ
®
and
Security
+
2.0
®
accessories.
•
DO NOT install on a one-piece door if
using devices or features providing
unattended close. Unattended devices
and features are to be used ONLY with
sectional doors.
Models 8160•8165•8065•8075
Installation Manual
FOR RESIDENTIAL USE ONLY
LiftMaster
845 Larch Avenue
Elmhurst, Illinois 60126-1196
LiftMaster.com