LiftMaster 84602 Owners Manual - English - Page 27
OPTION B - PRE-WIRED INSTALLATION, Pre-installed wires, Safety reversing, sensor wires
View all LiftMaster 84602 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Install the Protector System® OPTION B - PRE-WIRED INSTALLATION 1. Cut the sensor wires, making sure there is enough wire to reach the pre-installed wires from the wall. 2. Separate the sensor wires and strip insulation from each end. Choose two of the pre-installed wires and strip insulation from each end. Choose the same color pre-installed wires for each sensor. 3. Connect the pre-installed wires to the sensor wires with wire nuts making sure the colors correspond for each sensor. 4. At the garage door opener, strip the end of the wires previously connected to the sensors. Twist the like- colored wires together. 5. Using a screwdriver, push in the terminal tabs, and insert the wire color connected to the sensor's white wire into the white terminal. Insert the other wire color connected to the sensor's white/black wire into the grey terminal. 1 Pre-installed 2 wires 7/16" (11 mm) Safety reversing sensor wires 3 Safety reversing sensor wires White White/Black 4 Pre-installed wires 5 Wire nuts (not provided) Pre-installed wires Yellow (for example) Purple (for example) Wire channel Purple Yellow Yellow Purple 7/16" (11 mm) 27