LiftMaster LA412 LA412 Manual - Page 21
Wiring, Connect The Gate Operator (gate 1) To The Control Box
View all LiftMaster LA412 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
WIRING » CONNECT THE GATE OPERATOR (GATE 1) TO THE CONTROL BOX CONNECT THE GATE OPERATOR (GATE 1) TO THE CONTROL BOX 1 Select hole in bottom of the control box to be used for the operator cable. 2 Insert the watertight connector into the bottom of the control box and tighten with nut. 3 Insert the operator cable through the watertight connector mounted in the bottom of the control box. 4 Extend the operator cable and wires to the Gate 1 connector and connect as shown. 5 Tighten watertight connector nut. NC 4 Z1 GATE 1 10A 32V BRN D1Ø GRN WHT YEL BLU RED Z12 ACCESSORY POWER GATE 1 BRN GRN WHT U4 YEL BLU RED 3 MAX C13 C4 F6 F2 FUSE OPEN Nut 52 Operator Cable 1 Watertight Connector Nut Terminal blocks can be removed to simplify wiring. Watertight Connector KtDpTPiMmlheEoaidEyseneoPoieswntnvtCirtttliLiehhrIaanEteonnncAusggjchtRauemiplt!GdeirursGriysoaeaaftrrnoteteuorwaoesmv.rapeereaChnsDryeiiacnapmtelgeean.oasrtahvottCeeehnaglaeytanuattenrsayonerce Operator Cable If installing one operator, proceed to page 25. If installing two operators, continue to the next page. 20