LiftMaster TAC1 TAC1 Manual - Page 18

PROGRAMMING >> QUICK REFERENCE TELEPHONE PROGRAMMING PROGRAMMING NUMBER DESCRIPTION OF TASK **01 Enable Call Forwarding **02 Disable Call Forwarding **03 Enable Intercom Mode **06 Verify Call Forwarding Number (Via Caller ID) **07 Enable Telco Mode **#8 Erase Call Forwarding Number **10 Adjust Ring Count **13 Enable Alternate DTMF Programming **14 Enable Standard (Long) Ring Tone **15 Enable Alternate (Dual) Ring Tone #*16 Disable Alternate DTMF Programming *# Call Forwarding Number Enter Call Forwarding Telephone Number # FACTORY SETTING Disabled Disabled Disabled PROGRAMMING PROCEDURE **01 **02 **03 **06 Disabled 5 Disabled Enabled Enabled **07 **#8 **10 + Ring Count (2-5) **13 **14 **15 **16 *# + Telephone Number (Up to 14 digits) + # DIRECT COMMANDS FROM THE LOCAL TELEPHONE PROGRAMMING DESCRIPTION OF TASK NUMBER FACTORY PROGRAMMING PROCEDURE SETTING *5 Triggers Relay 2 *5 *9 Triggers Relay 1 *9 **04 Enable Party (Latched) Mode Relay 1 **04 **05 Disable Party (Latched) Mode Relay 1 **11 Enable "Do Not Disturb" Mode Disabled **11 **12 Disable "Do Not Disturb" Mode **12 DIRECT COMMANDS FROM THE FORWARDED TELEPHONE PROGRAMMING DESCRIPTION OF TASK NUMBER FACTORY PROGRAMMING PROCEDURE SETTING 0 Accepts Call From The Unit 0 (Also Extends Talk Time) *5 Triggers Relay 2 *5 *9 Triggers Relay 1 *9 NOTE: Use the STAR Key "*" to cancel any input. NOTE: Keypad commands are to be entered in a single string to result in success (indicated by double high success tone). Stop and go keystrokes will result in negative tones (low single and triple fail tones). 18