Linksys FESWSK5 User Guide

Linksys FESWSK5 - EtherFast Network in a Box Switch Manual

Get Linksys FESWSK5 - EtherFast Network in a Box Switch PDF manuals and user guides
UPC - 745883549054
View all Linksys FESWSK5 manuals
Add to My Manuals
Save this manual to your list of manuals

Linksys FESWSK5 manual content summary:

  • Linksys FESWSK5 | User Guide - Page 1
    Instant EtherFast® Series Fast Ethernet Switched 10/100 Network In a Box Use this guide to install : Model No.: FESWSK05 v3 User Guide
  • Linksys FESWSK5 | User Guide - Page 2
    purchase. If the product proves defective during this warranty period, call Linksys Customer Support in order to obtain a Return Authorization number. BE SURE TO HAVE and, if not installed and used according to the instructions, may cause harmful interference to radio communications. However, there
  • Linksys FESWSK5 | User Guide - Page 3
    Introduction 1 The Linksys Fast Ethernet Switched Troubleshooting 40 Troubleshooting for Windows 95, 98 and Millennium 40 Running the LAN Card's Diagnostics 44 Appendix 45 Sharing Your Files and Printers 45 Installing the Driver in Windows 95 Version A 47 Novell NetWare 3.x Client Setup
  • Linksys FESWSK5 | User Guide - Page 4
    Linksys also features Wake-On-LAN event management. If your PCI motherboard has built-in WOL support to other EtherFast® hubs, switches, routers or whatever Broadband peripherals your network • One 3.5" Driver Disk • One AC Adapter • One User Guide • Quick Installation Guides for all Windows Operating Systems
  • Linksys FESWSK5 | User Guide - Page 5
    switch. It is through these ports that network information is exchanged. You can expand your network by connecting your swtich to another switch, hub, router or Broadband modem through the Uplink port. If the Uplink port is being used, the #5 port adjacent to it will become inactive, reducing the
  • Linksys FESWSK5 | User Guide - Page 6
    . Avoid a call to technical support by making sure that your card ("interrupt") and I/O address. The LAN Card driver installation, return to the section called Installing the Workgroup Switch. • For Windows 95 installation instructions, turn to page 8. • For Windows 98 installation instructions
  • Linksys FESWSK5 | User Guide - Page 7
    on your Switch can connect to workstations, file servers, hubs, repeaters, bridges, routers or other switches. Connections to the Switch require UTP Category 5 network cabling follow these instructions for installing the network driver. The installation procedure for the network driver will vary
  • Linksys FESWSK5 | User Guide - Page 8
    this window will appear. Enter a:\win95. Windows will begin copying the LAN Card's driver files to your PC. 2. Windows 95 will fail to find the driver. Click the Other Locations button to browse for the driver. 4. Once Windows has located the drivers, the following window will appear. To use this
  • Linksys FESWSK5 | User Guide - Page 9
    setup of the LAN Card. Note: From this point on, you must provide Windows with a User name and Password instructions to install the network driver. The installation procedure for the network driver you encounter problems, consult the Troubleshooting section. Installing the LAN Card's Driver 1. If
  • Linksys FESWSK5 | User Guide - Page 10
    with the installation. 13 7. Windows will begin copying the LAN Card's driver files to your PC. At this point, the installation may require files more information about the setup of the LAN Card. Note: From this point on, you must provide Windows with a User name and Password every time you are
  • Linksys FESWSK5 | User Guide - Page 11
    computer, follow these instructions to install the network driver. The installation procedure for the network driver will depend on your current system configuration. If at any time during the installation you encounter problems, consult the Troubleshooting section. Installing the LNAeNtwCoarkrdC
  • Linksys FESWSK5 | User Guide - Page 12
    Windows with a User name and Password every time you are prompted to do setup of the LAN Card. 17 Fast Ethernet Switched 10/100 Network In a Box Windows NT 4.0 Installation & Setup Overview The following instructions with the EtherFast® LAN Card's network driver, and continue with step 1 below.
  • Linksys FESWSK5 | User Guide - Page 13
    ® 10/100 LAN Card Driver Disk into drive A. Type IP protocol, refer to your system administrator or your Windows NT documentation when installation steps that aren't listed in this User Guide appear. Linksys does not provide technical support for the configuration or troubleshooting of the TCP/IP
  • Linksys FESWSK5 | User Guide - Page 14
    Next again. Note: For information and help on choosing your bindings, services and protocols, ask your network administrator, or check your Windows NT documentation. 9. Windows NT will probably ask you to supply your original Windows NT CD-ROM or setup disks. If so, place your Windows NT CD-ROM in
  • Linksys FESWSK5 | User Guide - Page 15
    or your Windows NT documentation. Linksys does not provide technical support for the configuration or troubleshooting of the TCP/IP protocol The Windows NT Installation and Setup of the EtherFast® 10/100 LAN Card is complete. Do not continue on with the next set of instructions. They are for Windows
  • Linksys FESWSK5 | User Guide - Page 16
    NT will probably ask you to supply your original Windows NT CD-ROM or setup disks. Direct Windows NT to the proper location (most likely D:\i386). 4. Put the this User Guide appear. Linksys does not provide technical support for the configuration or troubleshooting of the TCP/IP protocol. 8.
  • Linksys FESWSK5 | User Guide - Page 17
    , refer to your system administrator or your Windows NT documentation. Linksys does not provide technical support for the configuration or troubleshooting of the TCP/IP protocol The Windows NT Installation and setup of the EtherFast® 10/100 LAN Card is complete. Return now to the section called
  • Linksys FESWSK5 | User Guide - Page 18
    device (Recommended)". Click Next. Fast Ethernet Switched 10/100 Network In a Box 5. When the Found New Hardware Wizard box appears, insert the Linksys EtherFast® 10/100 Driver Disk into your floppy drive. In the "Copy manufacturer's files from" field, type "A:\Win2000". Click OK. 4. The Locate
  • Linksys FESWSK5 | User Guide - Page 19
    the driver has been successfully installed. Click Finish. 8. Remove the driver disk from the floppy drive. The Windows 2000 driver installation is to manually install them. Refer to Manually Installing the Network Components for more information. • Client for Microsoft Networks • Linksys LNE100TX(
  • Linksys FESWSK5 | User Guide - Page 20
    tab. Ensure that Sharedlevel access control is selected. If the setting is on User-Level access control and you can't change it, refer to the Troubleshooting section . 12. Click the Configuration tab. Click the OK button. Your system may or may not ask you for your Windows CDROM or the location
  • Linksys FESWSK5 | User Guide - Page 21
    3. Following the Load LAN Driver Module instructions in your Novell NetWare 386 v3.12 manual, start NetWare and configure the server (if you haven't already). 4. Load the above LAN drivers using the LOAD command. 5. If the LAN driver is not located in the default directory, specify the file's path
  • Linksys FESWSK5 | User Guide - Page 22
    .NLM LOAD c:\LNE100TX\ETHERTSM.NLM LOAD c:\LNE100TX\LNE100.LAN FRAME = 7. Bind a protocol to the driver. For example: BIND IPX TO LNE100TX NET=XX where XX is the logical network address for your network. It can be any logical number. Note: You can save the LOAD command line
  • Linksys FESWSK5 | User Guide - Page 23
    you want to select an additional Network driver?, highlight No and press Enter. 18. Press ESC a few times to exit the program. The loading and binding are complete. The server is ready. 39 Fast Ethernet Switched 10/100 Network In a Box Troubleshooting Troubleshooting hints for Windows can be found
  • Linksys FESWSK5 | User Guide - Page 24
    card might not be setup properly. Try reinstalling the card's drivers. Clean your system of the old installation, and then re-install. 8. Network Neighborhood is Empty. • Verify that your Microsoft Client is installed. See the Windows 95 or 98 setup instructions in this guide for directions. Verify
  • Linksys FESWSK5 | User Guide - Page 25
    doesn't ask you, then reboot the PC manually). • After the computer boots up, Windows problem with the EtherFast® LAN Card, or if you need to identify the LAN Card's MAC address, you can use the DIAG diagnostic program on the EtherFast® 10/100 LAN Card Driver Linksys Customer Support for help. 44
  • Linksys FESWSK5 | User Guide - Page 26
    manual for client setup password in the Password box. Note: Not all printers may be shared on the network. Others may require special instructions. Refer to your printer's user guide setup and installation is com- plete. Your printer can now be accessed by other network users. The printer's driver
  • Linksys FESWSK5 | User Guide - Page 27
    , refer to the Troubleshooting section. 5. Windows 95 will copy the appropriate network drivers to your PC. . 1. Follow the Windows 95 setup instructions or the Windows 98 setup instructions. 2. Start up Windows 95 Assign the First Network Drive Letter; the default is F. Make sure the Enable logon
  • Linksys FESWSK5 | User Guide - Page 28
    Follow the Windows 95, 98 or Millennium setup instructions. 2. Start up Windows. Click on Start instructs your PC to log into a Windows NT 4.0 server where you already have a username and password grayed out and cannot be selected, refer to the Troubleshooting section. 7. When you're done, click OK.
  • Linksys FESWSK5 | User Guide - Page 29
    Instant EtherFast® Series 4. Remove any instance of the name Linksys in the box. This includes IPX/SPX...Linksys, NetBEUI...Linksys, and TCP/IP...Linksys. Also remove Client for Microsoft Networks, Client for NetWare Networks, and File and Printer Sharing for Microsoft Networks. Fast Ethernet
  • Linksys FESWSK5 | User Guide - Page 30
    open. 2. Choose the Hardware tab. 9. Remove all devices with the name Linksys in its description. (If at any point you are asked to restart the operating system (e.g. Windows 95, Windows 98, etc.) and follow the setup instructions. 53 3. Click the Device Manager button. The Device Manager window
  • Linksys FESWSK5 | User Guide - Page 31
    category should be removed from the Device Manager listing. 10. Close the Device Manager, click the System Properties window's OK button, and restart your computer. Manually Installing the Network Components in Windows 95 & 98 55 56
  • Linksys FESWSK5 | User Guide - Page 32
    may be times when you need to manually install missing Windows networking components. 1. Click Linksys LNE100TX(v5) Fast Ethernet Adapter • IPX/SPX-compatible Protocol • NetBEUI • TCP/IP be accessed in two different ways. Some motherboards support Wake-On-LAN features through a 3-pin connection
  • Linksys FESWSK5 | User Guide - Page 33
    . Enter the MAC address of the PC you guide for more information about its BIOS.) When a PCI card is used in a computer that supports problems configuring your BIOS or resolving IRQ or other hardware conflicts, consult your computer's manual or contact your PC's manufacturer for BIOS setup driver. 60
  • Linksys FESWSK5 | User Guide - Page 34
    MANUAL user guide for specific instructions. Menu support for setup and troubleshooting is not provided. For information on where to find device drivers and setup instructions for Linux and other freeware OSes, visit the support pages and FAQ files on the Linksys website at www.linksys IP and XNS. 62
  • Linksys FESWSK5 | User Guide - Page 35
    an office building). MAC Address - The MAC (Media Access Control) address is your computer's IRQs to be shared, which helps to solve the problem of limited IRQs available on a PC. For example computer or a network device such as a switch or router. For example, the serial and parallel ports on a
  • Linksys FESWSK5 | User Guide - Page 36
    may send messages to or get information from also has a copy of TCP/IP. Throughput - The amount of data moved successfully from one place to another 5 Model No: Standards: Protocol: Ports: Cabling Type: Speed (Mbps): WOL Support Bus Type: LEDs LNE100TX ver.5 IEEE 802.3, IEEE 802.3u, PCI 2.1, ACPI,
  • Linksys FESWSK5 | User Guide - Page 37
    A BARCODE FROM THE PRODUCT'S PACKAGING ON HAND WHEN CALLING. RETURN REQUESTS CANNOT BE PROCESSED WITHOUT PROOF OF PURCHASE. IN NO EVENT SHALL LINKSYS' LIABILITY EXCEED THE PRICE PAID FOR THE PRODUCT FROM DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE
  • Linksys FESWSK5 | User Guide - Page 38
    of this product, contact Linksys Customer Support at one of the phone numbers or Internet addresses below. Sales Information Tech Support RMA Issues Fax Email Web FTP Site 800-546-5797 (LINKSYS) 888-793-4632 949-261-1288 949-261-8868 [email protected] http://www.linksys.com ftp.linksys.com 69
  • Linksys FESWSK5 | User Guide - Page 39
    http://www.linksys.com © Copyright 2001 Linksys, All Rights Reserved.
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
Instant EtherFast
®
Series
Fast Ethernet
Switched 10/100
Network In a Box
Use this guide to install :
Model No.:
FESWSK05 v3
User Guide