Linksys RB-WRT54GS2 User Guide - Page 25

Chapter 3 show if the test was successful. To stop the test, click Stop. Click Clear Log to clear the screen. Click Close to return to the Diagnostics screen. Advanced Configuration The Traceroute Test Administration > Factory Defaults The Administration > Factory Defaults screen allows you to restore the Router's configuration to its factory default settings. Factory Defaults Restore Factory Defaults To reset the Router's settings to the default values, select Yes, and then click Save Settings. Any settings you have saved will be lost when the default settings are restored. Administration > Upgrade Firmware Before upgrading the firmware, download the Router's firmware upgrade file from the Linksys website, www. linksys.com. Then extract the file. Upgrade Firmware Please select a file to upgrade Click Browse and select the extracted firmware upgrade file. Then click Upgrade and follow the on-screen instructions. Administration > Config Management This screen is used to back up or restore the Router's configuration file. Administration > Factory Defaults Administration > Upgrade Firmware The Administration > Upgrade Firmware screen allows you to upgrade the Router's firmware. Do not upgrade the firmware unless you are experiencing problems with the Router or the new firmware has a feature you want to use. Administration > Config Management Backup Configuration To back up the Router's configuration file, click Backup. Then follow the on-screen instructions. Restore Configuration Please select a file to restore Click Browse and select the configuration file. Then click Restore. Wireless-G Broadband Router with SpeedBooster 21