Linksys SD205 Cisco SD205, SD208, SD216 10/100 Switches Quick Start Guide - Page 4

Getting to Know the 10/100 Switch - 5 port

Page 4 highlights

Chapter 2: Getting to Know the 10/100 Switch OPlvaenrnviinegwYour Network Layout The 5-, 8-, and 16-Port 10/100 Switches differ in number of LEDs and ports. Pictured here is the 5-Port 10/100 Switch; however, the other Switches are similar in form. Front Panel LEDs Figure 2-3 The power port is located on the side panel of the Switch (see Figure 2-3). (power) The power port is where you will connect the included power adapter. Figure 2-1 System Green. The System LED will light up when the Switch is powered on. 1-5, 1-8, or 1-16 Green. Each LED will light up when there is a connection made through its corresponding port. It will flash when there is activity on its corresponding port. Back and Side Panel Features Figure 2-4 The security slot is located on the other side panel (see Figure 2-4). (security slot) The security slot is where you can attach a lock so the Switch will be protected from theft. Figure 2-2 The network ports are located on the back panel of the Switch. 1-5, 1-8, or 1-16 These ports are connection points for PCs and other network devices, such as additional switches. 2 3

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9

The power port is located on the side panel of the Switch (see Figure 2-3).
(power)
The power port is where you will connect the included power
adapter.
The security slot is located on the other side panel (see Figure 2-4).
(security slot)
The security slot is where you can attach a lock so the Switch
will be protected from theft.
3
2
Chapter 2: Getting to Know the
10/100 Switch
Planning Your Network Layout
The 5-, 8-, and 16-Port 10/100 Switches differ in number of LEDs and ports.
Pictured here is the 5-Port 10/100 Switch; however, the other Switches are sim-
ilar in form.
System
Green.
The System LED will light up when the Switch is
powered on.
1-5
,
1-8
, or
1-16
Green.
Each LED will light up when there is a connection
made through its corresponding port. It will flash when there
is activity on its corresponding port.
The network ports are located on the back panel of the Switch.
1-5
,
1-8
, or
1-16
These ports are connection points for PCs and other network
devices, such as additional switches.
Overview
Figure 2-1
Front Panel LEDs
Back and Side Panel Features
Figure 2-2
Figure 2-3
Figure 2-4