Linksys SPA942 Cisco WBP54G Wireless-G Bridge for Phone Adapters User Guide
Linksys SPA942 - Cisco - IP Phone Manual
UPC - 745883569113
View all Linksys SPA942 manuals
Add to My Manuals
Save this manual to your list of manuals |
Linksys SPA942 manual content summary:
- Linksys SPA942 | Cisco WBP54G Wireless-G Bridge for Phone Adapters User Guide - Page 1
® A Division of Cisco Systems, Inc. 2.4GHz 802.11g Wireless-G Bridge for Phone Adapters WIRELESS User Guide Model No. WBP54G v2 - Linksys SPA942 | Cisco WBP54G Wireless-G Bridge for Phone Adapters User Guide - Page 2
Phone Adapters Copyright and Trademarks Specifications are subject to change without notice. Linksys User Guide This User Guide has been designed to make understanding networking with the Wireless-G Bridge for Phone Adapters easier than ever. Look for the following items when reading this User Guide - Linksys SPA942 | Cisco WBP54G Wireless-G Bridge for Phone Adapters User Guide - Page 3
the Setup Wizard 7 Running the Setup Wizard 7 Appendix A: Troubleshooting 17 Common Problems and Solutions 17 Frequently Asked Questions 18 Appendix B: Wireless Security 21 Security Precautions 21 Security Threats Facing Wireless Networks 21 Appendix C: Upgrading Firmware 24 - Linksys SPA942 | Cisco WBP54G Wireless-G Bridge for Phone Adapters User Guide - Page 4
Appendix H: Regulatory Information 39 Appendix I: Contact Information 46 - Linksys SPA942 | Cisco WBP54G Wireless-G Bridge for Phone Adapters User Guide - Page 5
License Agreement Screen 7 Figure 4-3: Check for Compatibility Screen 8 Figure 4-4: Disconnect the Power from the Phone Adapter or IP Phone Screen 8 Figure 4-5: Power on the Bridge Screen 9 Figure 4-6: Connecting the Network Cable to a Router Screen 9 Figure 4-7: Wireless-G Bridge Setup - Linksys SPA942 | Cisco WBP54G Wireless-G Bridge for Phone Adapters User Guide - Page 6
Wireless-G Bridge for Phone Adapters Figure C-11: Browsed Devices on Network Screen - Select Bridge 27 Figure C-12: Upgrade Successful 28 - Linksys SPA942 | Cisco WBP54G Wireless-G Bridge for Phone Adapters User Guide - Page 7
you through configuring the Bridge for your wireless network, step by step. Use the instructions in this Guide to help you set up and connect the Bridge as you run the Setup Wizard. These instructions should be all you need to get the most out of the Wireless-G Bridge for Phone Adapters. network - Linksys SPA942 | Cisco WBP54G Wireless-G Bridge for Phone Adapters User Guide - Page 8
Phone Adapters This chapter shows you how to set up and connect the Bridge. • Appendix A: Troubleshooting This appendix describes some problems Help for instructions about networking, such as installing the TCP/IP protocol. • Linksys resources, including Technical Support. 2 What's in This User Guide - Linksys SPA942 | Cisco WBP54G Wireless-G Bridge for Phone Adapters User Guide - Page 9
configured to share the same radio channel. Several PCs equipped with wireless cards or adapters can communicate with one another to form an ad-hoc network. Linksys wireless adapters also provide users Roaming Infrastructure mode also supports roaming capabilities for mobile users. Roaming means that - Linksys SPA942 | Cisco WBP54G Wireless-G Bridge for Phone Adapters User Guide - Page 10
communicate with a wireless print server. Now with the Wireless-G Bridge for Phone Adapters, you can add wireless connectivity to your LInksys phone adapter or IP phone (compatible model numbers: PAP2, SPA1001, SPA2000, SPA2002, SPA3000, SPA2100, SPA841, SPA842, SPA941, SPA942, and SPA9000). When - Linksys SPA942 | Cisco WBP54G Wireless-G Bridge for Phone Adapters User Guide - Page 11
. When the Bridge's firmware is being upgraded, the Ethernet and Wireless LEDs alternate flashing. The Port The Bridge does not include its own power adapter; instead, it uses the power adapter of the Linksys phone adapter or IP phone. Power The Power port only supports a 5 V, 2 A, DC power - Linksys SPA942 | Cisco WBP54G Wireless-G Bridge for Phone Adapters User Guide - Page 12
router or PC running the Setup Wizard. After setup, you will use this cable to connect the Bridge to the Linksys phone adapter or IP phone. Power After the Bridge has been configured, you will connect this cable to the Power port of the Linksys phone adapter or IP phone. One power adapter will - Linksys SPA942 | Cisco WBP54G Wireless-G Bridge for Phone Adapters User Guide - Page 13
software installation process. User Guide - Click the User Guide button to open this User Guide. Exit - Click Exit to exit the Setup Wizard. Running the Setup Wizard 1. To install the Bridge, click the Click Here to Start button on the Welcome screen. 2. After reading the License Agreement, click - Linksys SPA942 | Cisco WBP54G Wireless-G Bridge for Phone Adapters User Guide - Page 14
Next to proceed with the installation process, or click Back to return to the previous screen. To exit the Setup Wizard, click Exit. NOTE: The power adapter for your Linksys phone adapter or IP phone will be used to power the Bridge. Figure 4-3: Check for Compatibility Screen 4. You will use the PC - Linksys SPA942 | Cisco WBP54G Wireless-G Bridge for Phone Adapters User Guide - Page 15
you connect the Bridge to a router, make sure the Bridge and PC running the Setup Wizard are connected to the Ethernet network (LAN) ports of the same router. Make the Wireless-G Bridge for Phone Adapters Running the Setup Wizard Figure 4-6: Connecting the Network Cable to a Router Screen - Linksys SPA942 | Cisco WBP54G Wireless-G Bridge for Phone Adapters User Guide - Page 16
Phone Adapters that can be detected by the Setup Wizard will be displayed. Select the Bridge you are installing and click Next. If the Bridge you want is not displayed, click the Refresh List button to search again. Figure 4-7: Wireless-G Bridge Setup SSID radio button and manually enter its SSID. - Linksys SPA942 | Cisco WBP54G Wireless-G Bridge for Phone Adapters User Guide - Page 17
Phone Adapters 9. Configure the wireless security settings. Select the method your network is using, WPA, WPA2, WEP (128-Bit), or WEP (64-Bit). Then proceed to the appropriate instructions Wireless-G Bridge for Phone Adapters Running the Setup Wizard Figure 4-10: Security Settings - WPA2 Screen 11 - Linksys SPA942 | Cisco WBP54G Wireless-G Bridge for Phone Adapters User Guide - Page 18
devices and is compatible with Linksys wireless products only. (If you have any non-Linksys wireless products, enter the WEP key manually on those products.) A new and Connecting the Wireless-G Bridge for Phone Adapters Running the Setup Wizard Figure 4-12: Security Settings - WEP Keys Screen 12 - Linksys SPA942 | Cisco WBP54G Wireless-G Bridge for Phone Adapters User Guide - Page 19
Wireless-G Bridge for Phone Adapters 10. The new settings will be displayed. Review them before you proceed. Click Next to save Chapter 4: Setting Up and Connecting the Wireless-G Bridge for Phone Adapters Running the Setup Wizard Figure 4-15: Disconnect the Network Cable from the Router Screen 13 - Linksys SPA942 | Cisco WBP54G Wireless-G Bridge for Phone Adapters User Guide - Page 20
the Ethernet network cable of the Bridge to the phone adapter or IP phone. Click Next to proceed, or click Back to return to the previous screen. Chapter 4: Setting Up and Connecting the Wireless-G Bridge for Phone Adapters Running the Setup Wizard Figure 4-17: Disconnect the Network Cable from - Linksys SPA942 | Cisco WBP54G Wireless-G Bridge for Phone Adapters User Guide - Page 21
of the Bridge to the Power port of the phone adapter or IP phone. Then connect the power adapter to an electrical outlet Bridge Power Cable to the Phone Adapter Screen Chapter 4: Setting Up and Connecting the Wireless-G Bridge for Phone Adapters Running the Setup Wizard Figure 4-19: Wireless - Linksys SPA942 | Cisco WBP54G Wireless-G Bridge for Phone Adapters User Guide - Page 22
appear. Click Exit to exit the Setup Wizard, or click Online Registration to register the Bridge at www.linksys.com/registration. Congratulations! Setup is complete. Figure 4-20: Congratulations Screen Chapter 4: Setting Up and Connecting the Wireless-G Bridge for Phone Adapters 16 Running the - Linksys SPA942 | Cisco WBP54G Wireless-G Bridge for Phone Adapters User Guide - Page 23
The Linksys phone adapter or IP phone connected to the Bridge does not have a valid IP address. This problem does not involve the Bridge (the Bridge only provides a connection between the wireless network and the phone adapter or IP phone). Make sure the phone adapter or IP phone has been configured - Linksys SPA942 | Cisco WBP54G Wireless-G Bridge for Phone Adapters User Guide - Page 24
Linksys phone adapters and IP phones, listed by model number: PAP2, SPA1001, SPA2000, SPA2002, SPA3000, SPA2100, SPA841, SPA842, SPA941, SPA942, and your Linksys phone adapter or IP phone. Refer to "Chapter 4: Setting Up and Configuring the Wireless-G Bridge for Phone Adapters" for instructions. What - Linksys SPA942 | Cisco WBP54G Wireless-G Bridge for Phone Adapters User Guide - Page 25
for Phone Adapters What IEEE 802.11g features are supported? The product supports infrastructure mode, the wireless network is configured to communicate with a wired network through up and down the backbone. As the user moves on, the end node's RF transmitter Troubleshooting 19 Frequently Asked Questions - Linksys SPA942 | Cisco WBP54G Wireless-G Bridge for Phone Adapters User Guide - Page 26
Phone Adapters worldwide. This presents a truly revolutionary opportunity to place convenient high-speed wireless capabilities in the hands of users Dial-In User Service) server. For more information, refer to "Appendix B: Wireless Security." Appendix A: Troubleshooting 20 Frequently - Linksys SPA942 | Cisco WBP54G Wireless-G Bridge for Phone Adapters User Guide - Page 27
Phone Adapters Appendix B: Wireless Security Linksys wants to make wireless networking as safe and easy for you as possible. The current generation of Linksys the network's SSID (Service Set Identifier). Here are the steps you can take: Change the administrator's password regularly. With every - Linksys SPA942 | Cisco WBP54G Wireless-G Bridge for Phone Adapters User Guide - Page 28
-G Bridge for Phone Adapters SSID. There products come with a default SSID set by the factory. (The Linksys default SSID is "linksys".) Hackers know these defaults and can check these symmetric 128-bit block data encryption. WPA. Enter a password in the Passphrase field of 8-63 characters. Appendix B: - Linksys SPA942 | Cisco WBP54G Wireless-G Bridge for Phone Adapters User Guide - Page 29
Wireless-G Bridge for Phone Adapters WPA2. Enter a password in the Passphrase field of 8-63 characters. Implementing encryption may have you are enjoying the most flexible and convenient technology Linksys has to offer. Appendix B: Wireless Security 23 Security Threats Facing Wireless Networks - Linksys SPA942 | Cisco WBP54G Wireless-G Bridge for Phone Adapters User Guide - Page 30
Wireless-G Bridge for Phone Adapters Appendix C: Upgrading Firmware To upgrade the Bridge's firmware, follow these instructions: 1. On a computer running Windows 2000 or XP, download the upgrade application (WBP54G Upgrade Application.zip) and the latest firmware from Linksys's website at www. - Linksys SPA942 | Cisco WBP54G Wireless-G Bridge for Phone Adapters User Guide - Page 31
the Bridge's combination Ethernet network and power cable from the phone adapter or IP phone. If your PC is in a different room, disconnect the Upgrade Utility. Figure C-4: Choose Destination Location Figure C-5: Setup is Complete Appendix C: Upgrading Firmware Figure C-6: Start Upgrade Utility - Linksys SPA942 | Cisco WBP54G Wireless-G Bridge for Phone Adapters User Guide - Page 32
Wireless-G Broadband Router 10. The Upgrade Utility screen will appear. Click Browse, and then click Browse Targets. 11. The Browsed Devices on Network screen will appear. Click the Files button. Appendix C: Upgrading Firmware Figure C-7: Upgrade Utility - Browse Targets Figure C-8: Browsed - Linksys SPA942 | Cisco WBP54G Wireless-G Bridge for Phone Adapters User Guide - Page 33
Phone Adapters 12. Select the extracted firmware file, and then click the Open button. 13. The BIN File Information screen will appear. Click the OK button. Figure C-9: Open Firmware File 14. On the Browsed Devices on Network screen, select the Bridge from the Devices List, and click the Upgrade - Linksys SPA942 | Cisco WBP54G Wireless-G Bridge for Phone Adapters User Guide - Page 34
: Do not disconnect the power adapter from the Bridge while the firmware is being upgraded. Otherwise, damage may occur to the Bridge. 16. Disconnect the Ethernet network cable from the PC. If the phone adapter or IP phone is in a different room, disconnect the power adapter from the electrical - Linksys SPA942 | Cisco WBP54G Wireless-G Bridge for Phone Adapters User Guide - Page 35
Wireless-G Bridge for Phone Adapters Appendix D: Windows Help Almost all wireless products require will not be able to utilize wireless networking without having TCP/IP enabled. Windows Help provides complete instructions on enabling TCP/IP. Shared Resources If you wish to share printers, folder, or - Linksys SPA942 | Cisco WBP54G Wireless-G Bridge for Phone Adapters User Guide - Page 36
Internet traffic from your local area network. DHCP (Dynamic Host Configuration Protocol) - A networking protocol that allows administrators to assign temporary IP addresses to network computers by "leasing" an IP address to a user for a limited amount of time, instead of assigning permanent - Linksys SPA942 | Cisco WBP54G Wireless-G Bridge for Phone Adapters User Guide - Page 37
name for a network of computers. Download - To receive a file transmitted over a network. DSL (Digital Subscriber Line) - An always-on broadband connection over traditional phone lines. Dynamic IP Address - A temporary IP address assigned by a DHCP server. EAP (Extensible Authentication Protocol - Linksys SPA942 | Cisco WBP54G Wireless-G Bridge for Phone Adapters User Guide - Page 38
the Point to Point Protocol (PPP) to be tunneled through an IP network. This protocol is also used as a type of broadband connection in Europe. RADIUS (Remote Authentication Dial-In User Service) - A protocol that uses an authentication server to control network access. Appendix E: Glossary 32 - Linksys SPA942 | Cisco WBP54G Wireless-G Bridge for Phone Adapters User Guide - Page 39
together. Server - Any computer whose function in a network is to provide user access to files, printing, communications, and other services. SMTP IP (Transmission Control Protocol/Internet Protocol) - A set of instructions PCs use to communicate over a network. Telnet - A user command and TCP/IP - Linksys SPA942 | Cisco WBP54G Wireless-G Bridge for Phone Adapters User Guide - Page 40
-G Bridge for Phone Adapters TKIP (Temporal Key Integrity Protocol) - a wireless encryption protocol that provides dynamic encryption keys for each packet transmitted. Topology - The physical layout of a network. TX Rate - Transmission Rate. Upgrade - To replace existing software or firmware with - Linksys SPA942 | Cisco WBP54G Wireless-G Bridge for Phone Adapters User Guide - Page 41
Wireless-G Bridge for Phone Adapters Appendix F: Specifications Model Standards Port LEDs Cabling Type # of Antennas 29 mm) 2.54 oz. (0.072 kg) External, 5V DC, 2.0A (Not included, use the power adapter shipped with Linksys phone adapter or IP phone products) Appendix F: Specifications 35 - Linksys SPA942 | Cisco WBP54G Wireless-G Bridge for Phone Adapters User Guide - Page 42
Wireless-G Bridge for Phone Adapters Certifications Operating Temp. Storage Temp. Operating Humidity Storage Humidity FCC, CE, cUL, IC-03, Wi-Fi, WPA, WPA2 0° C to 40° C (32° F to 104° F) -20° C - Linksys SPA942 | Cisco WBP54G Wireless-G Bridge for Phone Adapters User Guide - Page 43
, defaced, or removed, or (g) the product is supplied or licensed for beta, evaluation, testing or demonstration purposes for which Linksys does not charge a purchase price or license fee. ALL SOFTWARE PROVIDED BY LINKSYS WITH THE PRODUCT, WHETHER FACTORY LOADED ON THE PRODUCT OR CONTAINED ON MEDIA - Linksys SPA942 | Cisco WBP54G Wireless-G Bridge for Phone Adapters User Guide - Page 44
(VAR) from whom you purchased the product or Linksys Technical Support for instructions on how to obtain warranty service. The telephone number for Linksys Technical Support in your area can be found in the product User Guide and at www.linksys.com. Have your product serial number and proof of - Linksys SPA942 | Cisco WBP54G Wireless-G Bridge for Phone Adapters User Guide - Page 45
for Phone installed and used in accordance with the instructions, may cause harmful interference to radio determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one firmware controlled in the USA. Appendix H: Regulatory Information 39 - Linksys SPA942 | Cisco WBP54G Wireless-G Bridge for Phone Adapters User Guide - Page 46
reduce the risk of fire, use only No.26 AWG or larger telecommunication line cord. Do not use this product near water, for example, in a system operating either partially or completely outdoors may require the user to obtain a license for the system according to the Canadian regulations. This - Linksys SPA942 | Cisco WBP54G Wireless-G Bridge for Phone Adapters User Guide - Page 47
Wireless-G Bridge for Phone Adapters User Information for Consumer Products Covered by EU Directive 2002/96/EC on Waste Electric and Electronic Equipment (WEEE) This document contains important information for users with regards to the proper disposal and recycling of Linksys products. Consumers are - Linksys SPA942 | Cisco WBP54G Wireless-G Bridge for Phone Adapters User Guide - Page 48
Wireless-G Bridge for Phone Adapters Appendix H: Regulatory Information 42 - Linksys SPA942 | Cisco WBP54G Wireless-G Bridge for Phone Adapters User Guide - Page 49
Wireless-G Bridge for Phone Adapters Appendix H: Regulatory Information 43 - Linksys SPA942 | Cisco WBP54G Wireless-G Bridge for Phone Adapters User Guide - Page 50
Wireless-G Bridge for Phone Adapters Appendix H: Regulatory Information 44 - Linksys SPA942 | Cisco WBP54G Wireless-G Bridge for Phone Adapters User Guide - Page 51
Dual-Band Wireless Access Point For more information, visit www.linksys.com. Appendix H: Regulatory Information 45 - Linksys SPA942 | Cisco WBP54G Wireless-G Bridge for Phone Adapters User Guide - Page 52
know more about networking with Linksys products? Give our advice line a call at: Or fax your request in to: If you experience problems with any Linksys product, you can call this Guide.) http://www.linksys.com or ftp.linksys.com 800-546-5797 (LINKSYS) 949-823-3002 800-326-7114 [email protected]
A Division of Cisco Systems, Inc.
®
Model No.
Bridge for Phone Adapters
Wireless-
G
WBP54G v2
User Guide
WIRELESS
GHz
2.4
802.11g